Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 15 September 2026 Roper Gulf

Out · last detection 14 Oct 2026, 17:05 UTC

The fire started on 15 September 2026 in Roper Gulf, Australia, and satellites saw it burning for 30 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 199,525 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
199,525ha
GWIS perimeter (Copernicus)
Duration
30days
15 Sept 2026 – 14 Oct 2026
Municipalities hit
1
local government areas
Started on
15 Sept
2026
Heat detections
4,405
in a single hotspot: 279 MW
Danger at start
78
Very extreme · FWI index
Average daily power
1.2GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Sept14 Oct
14 Oct 2026

How it evolved, day by day

15 Sept 2026 · 527 MW · 52 16 Sept 2026 · 292 MW · 42 17 Sept 2026 · 1,246 MW · 172 18 Sept 2026 · 5,982 MW · 469 19 Sept 2026 · 2,648 MW · 321 20 Sept 2026 · 782 MW · 122 21 Sept 2026 · 332 MW · 119 22 Sept 2026 · 1,966 MW · 273 23 Sept 2026 · 5,620 MW · 346 24 Sept 2026 · 1,025 MW · 339 25 Sept 2026 · 3,614 MW · 248 26 Sept 2026 · 65 MW · 16 27 Sept 2026 · 59 MW · 5 28 Sept 2026 · 131 MW · 59 29 Sept 2026 · 1,464 MW · 131 30 Sept 2026 · 108 MW · 30 1 Oct 2026 · 311 MW · 83 2 Oct 2026 · 149 MW · 49 3 Oct 2026 · 305 MW · 156 4 Oct 2026 · 2,875 MW · 281 5 Oct 2026 · 864 MW · 141 6 Oct 2026 · 950 MW · 172 7 Oct 2026 · 2,710 MW · 309 8 Oct 2026 · 1,675 MW · 279 9 Oct 2026 · 524 MW · 58 10 Oct 2026 · 133 MW · 40 11 Oct 2026 · 166 MW · 23 12 Oct 2026 · 330 MW · 56 13 Oct 2026 · 8 MW · 4 14 Oct 2026 · 31 MW · 10
18 Sept 27 Sept 3 Oct 9 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (115 passes) and with what wind. Watch the film

The weather it burned in

40°high
50km/h · peak gust
13%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 5.9 mm on 23 Oct.

This area had burned before

64% of the perimeter overlaps earlier fires recorded since 2016: 24,926 ha in 2016, 38,492 ha in 2017, 19,073 ha in 2018, 5,992 ha in 2020, 47,245 ha in 2021, 1,536 ha in 2022, 49,761 ha in 2023, 36,827 ha in 2024, 21,129 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 127,786 ha that had burned before.

How big is it?

20 km
It burned the equivalent of 1.3 times the area of London (1,995 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    201,101 ha reached on 15 Sept
    1.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.93 ha
Residents< 20

Inside the perimeter there were about 0.93 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Sept 35.0 °C 17 % 50 km/h 0.0 mm Very extreme 78
16 Sept 34.0 °C 14 % 50 km/h 0.0 mm Very extreme 80
17 Sept 34.5 °C 17 % 45 km/h 0.0 mm Very extreme 75
18 Sept 33.3 °C 22 % 46 km/h 0.0 mm Very extreme 76
19 Sept 33.1 °C 26 % 50 km/h 0.0 mm Very extreme 79
20 Sept 33.4 °C 20 % 38 km/h 0.0 mm Extreme 61
21 Sept 33.9 °C 18 % 30 km/h 0.0 mm Very high 49
22 Sept 35.1 °C 14 % 35 km/h 0.0 mm Extreme 55
23 Sept 35.4 °C 13 % 41 km/h 0.0 mm Extreme 66
24 Sept 34.9 °C 18 % 46 km/h 0.0 mm Very extreme 78
25 Sept 34.7 °C 15 % 44 km/h 0.0 mm Extreme 61
26 Sept 33.9 °C 25 % 42 km/h 0.0 mm Extreme 67
27 Sept 33.2 °C 27 % 45 km/h 0.0 mm Extreme 67
28 Sept 35.0 °C 18 % 38 km/h 0.0 mm Extreme 58
29 Sept 34.9 °C 19 % 41 km/h 0.0 mm Extreme 63
30 Sept 32.6 °C 32 % 38 km/h 0.0 mm Very high 47
1 Oct 33.7 °C 31 % 40 km/h 0.1 mm Extreme 52
2 Oct 34.5 °C 24 % 40 km/h 0.0 mm Extreme 53
3 Oct 35.7 °C 20 % 41 km/h 0.0 mm Extreme 64
4 Oct 35.3 °C 19 % 37 km/h 0.0 mm Extreme 56
5 Oct 35.9 °C 22 % 30 km/h 0.0 mm Very high 43
6 Oct 37.2 °C 20 % 32 km/h 0.0 mm Very high 45
7 Oct 37.9 °C 21 % 32 km/h 0.0 mm Extreme 55
8 Oct 37.1 °C 22 % 31 km/h 0.0 mm Very high 47
9 Oct 37.3 °C 28 % 31 km/h 0.0 mm Very high 49
10 Oct 36.9 °C 29 % 36 km/h 0.0 mm Very high 48
11 Oct 38.4 °C 22 % 34 km/h 0.0 mm Extreme 53
12 Oct 39.4 °C 23 % 36 km/h 0.0 mm Very high 43
13 Oct 39.8 °C 24 % 29 km/h 0.0 mm Very high 48
14 Oct 37.3 °C 30 % 35 km/h 0.0 mm Extreme 52
15 Oct after 36.8 °C 31 % 33 km/h 0.3 mm Extreme 51
16 Oct after 38.1 °C 29 % 32 km/h 0.0 mm Very high 43
17 Oct after 36.5 °C 34 % 31 km/h 0.0 mm Very high 42
18 Oct after 37.8 °C 29 % 29 km/h 0.0 mm Very high 40
19 Oct after 37.9 °C 24 % 31 km/h 0.0 mm Very high 45
20 Oct after 38.8 °C 22 % 36 km/h 0.0 mm Extreme 54
21 Oct after 37.3 °C 26 % 33 km/h 0.0 mm Extreme 52
22 Oct after 38.4 °C 24 % 35 km/h 0.0 mm Extreme 51
23 Oct after 37.2 °C 33 % 34 km/h 5.9 mm Very high 44

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Sept 2026
After · 21 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 22 September 2026 the air beside the fire reached 77 µg/m³ of PM2.5. That day averaged 29: 1.9 times the WHO daily guideline (15).

PM2.5 peak77 µg/m³
Days over the guideline5 days
PM1078 µg/m³
Optical depth0.53
13 Sept18 Sept23 Sept28 Sept3 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 4,405Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
GWIS (Copernicus) dates it between 15 September 2026 and 14 October 2026: 30 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 199,525 hectares (1,995.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Roper Gulf (201,101 ha, 1.1 %).
What was the weather like?
During the fire the temperature reached 39.8 °C, humidity dropped to 13 % and gusts hit 50 km/h. The fire danger index (FWI) reached 80, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 208,022 → 199,525 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 4,405 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.