Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 13 October 2025 Roper Gulf

Out · last detection 30 Oct 2025, 04:49 UTC

The fire started on 13 October 2025 in Roper Gulf, Australia, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 53,391 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
53,391ha
GWIS perimeter (Copernicus)
Duration
18days
13 Oct 2025 – 30 Oct 2025
Municipalities hit
1
local government areas
Started on
13 Oct
2025
Heat detections
1,989
in a single hotspot: 232 MW
Danger at start
34
High · FWI index
Average daily power
1.0GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Oct30 Oct
30 Oct 2025

How it evolved, day by day

13 Oct 2025 · 3 MW · 1 14 Oct 2025 · 549 MW · 44 15 Oct 2025 · 1,253 MW · 39 16 Oct 2025 · 246 MW · 77 17 Oct 2025 · 495 MW · 116 18 Oct 2025 · 387 MW · 104 19 Oct 2025 · 793 MW · 135 20 Oct 2025 · 807 MW · 102 21 Oct 2025 · 2,272 MW · 160 22 Oct 2025 · 2,652 MW · 331 23 Oct 2025 · 1,267 MW · 259 24 Oct 2025 · 1,071 MW · 128 25 Oct 2025 · 4,391 MW · 263 26 Oct 2025 · 1,527 MW · 219 27 Oct 2025 · 39 MW · 8 28 Oct 2025 · 9 MW · 2 30 Oct 2025 · 10 MW · 1
13 Oct 17 Oct 21 Oct 25 Oct 30 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
47km/h · peak gust
15%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 7 Nov.

This area had burned before

70% of the perimeter overlaps earlier fires recorded since 2016: 13,857 ha in 2016, 17,424 ha in 2017, 634 ha in 2018, 602 ha in 2019, 1,258 ha in 2020, 10,306 ha in 2021, 9,602 ha in 2022, 5,659 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 37,340 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 34% of the area of London (534 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    53,709 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.38 ha
Residents< 20

Inside the perimeter there were about 0.38 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Oct 38.1 °C 30 % 36 km/h 5.0 mm High 34
14 Oct 37.1 °C 33 % 39 km/h 2.8 mm Moderate 17
15 Oct 36.8 °C 33 % 43 km/h 0.2 mm High 37
16 Oct 38.2 °C 28 % 34 km/h 0.0 mm High 31
17 Oct 39.1 °C 26 % 47 km/h 0.1 mm Extreme 56
18 Oct 38.5 °C 29 % 41 km/h 0.1 mm Extreme 52
19 Oct 38.3 °C 23 % 40 km/h 0.0 mm Extreme 56
20 Oct 39.7 °C 15 % 46 km/h 0.0 mm Very extreme 72
21 Oct 38.4 °C 19 % 35 km/h 0.0 mm Extreme 60
22 Oct 39.7 °C 18 % 34 km/h 0.0 mm Extreme 52
23 Oct 40.5 °C 21 % 36 km/h 0.0 mm Extreme 59
24 Oct 39.5 °C 29 % 30 km/h 0.0 mm High 34
25 Oct 41.1 °C 20 % 35 km/h 0.0 mm Very high 45
26 Oct 40.3 °C 19 % 30 km/h 0.0 mm Very high 45
27 Oct 39.9 °C 24 % 34 km/h 0.0 mm Very high 45
28 Oct 39.7 °C 30 % 36 km/h 0.6 mm Very high 42
29 Oct 38.8 °C 29 % 31 km/h 0.2 mm High 31
30 Oct 38.8 °C 30 % 30 km/h 2.3 mm High 37
31 Oct after 39.2 °C 31 % 31 km/h 0.3 mm High 27
1 Nov after 38.2 °C 36 % 32 km/h 0.0 mm High 30
2 Nov after 40.6 °C 22 % 27 km/h 0.0 mm Very high 44
3 Nov after 35.9 °C 39 % 38 km/h 0.6 mm Very high 46
4 Nov after 35.7 °C 34 % 38 km/h 0.0 mm Very high 39
5 Nov after 37.1 °C 29 % 41 km/h 0.0 mm Extreme 51
6 Nov after 38.9 °C 22 % 34 km/h 0.0 mm Extreme 54
7 Nov after 38.7 °C 31 % 32 km/h 1.0 mm Very high 38

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Oct 2025
After · 6 Nov 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 24 October 2025 the air beside the fire reached 88 µg/m³ of PM2.5. That day averaged 49: 3.3 times the WHO daily guideline (15).

PM2.5 peak88 µg/m³
Days over the guideline10 days
PM1092 µg/m³
Optical depth1.58
14 Oct18 Oct22 Oct26 Oct30 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,989Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 13 October 2025 to 30 October 2025 (18 days). The perimeter dates it from 16 October 2025 to 28 October 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 53,391 hectares (533.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Roper Gulf (53,709 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 41.1 °C, humidity dropped to 15 % and gusts hit 47 km/h. The fire danger index (FWI) reached 72, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 28 October 2025 → 30 October 2025.
  2. Start date: 16 October 2025 → 13 October 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 October 2025 to 28 October 2025. 1,989 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.