Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 14 November 2024 Roper Gulf, Barkly

Out · last detection 17 Nov 2024, 16:00 UTC

The fire started on 14 November 2024 in Roper Gulf, Australia, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 19,525 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
19,525ha
GWIS perimeter (Copernicus)
Duration
4days
14 Nov 2024 – 17 Nov 2024
Municipalities hit
2
local government areas
Started on
14 Nov
2024
Heat detections
519
in a single hotspot: 55 MW
Danger at start
46
Very high · FWI index
Average daily power
962MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Nov17 Nov
17 Nov 2024

How it evolved, day by day

14 Nov 2024 · 220 MW · 32 15 Nov 2024 · 2,331 MW · 257 16 Nov 2024 · 595 MW · 141 17 Nov 2024 · 700 MW · 89
14 Nov 15 Nov 16 Nov 17 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
42km/h · peak gust
20%lowest humidity

It had gone 56 days without rain (1 mm or more) when it started. Rain came after the fire: 19.2 mm on 18 Nov.

This area had burned before

43% of the perimeter overlaps earlier fires recorded since 2016: 1,766 ha in 2016, 4,378 ha in 2017, 3,063 ha in 2018, 716 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 8,319 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 12% of the area of London (195 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    17,247 ha
    0.1 %
  2. 2,502 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Nov 37.1 °C 35 % 37 km/h 3.5 mm Very high 46
15 Nov 38.2 °C 20 % 31 km/h 0.3 mm High 34
16 Nov 36.3 °C 34 % 37 km/h 0.0 mm Very high 46
17 Nov 37.9 °C 35 % 42 km/h 0.1 mm Very high 43
18 Nov after 34.1 °C 45 % 35 km/h 19.2 mm High 36

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Nov 2024
After · 24 Nov 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 16 November 2024 the air beside the fire reached 102 µg/m³ of PM2.5. That day averaged 60: 4.0 times the WHO daily guideline (15).

PM2.5 peak102 µg/m³
Days over the guideline8 days
PM10103 µg/m³
Optical depth1.49
12 Nov14 Nov16 Nov18 Nov20 Nov
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 519Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
GWIS (Copernicus) dates it between 14 November 2024 and 17 November 2024: 4 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 19,525 hectares (195.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Roper Gulf (17,247 ha, 0.1 %); Barkly (2,502 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 38.2 °C, humidity dropped to 20 % and gusts hit 42 km/h. The fire danger index (FWI) reached 46, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 519 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.