Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 20 October 2021 Roper Gulf

Out · last detection 4 Nov 2021, 04:46 UTC

The fire started on 20 October 2021 in Roper Gulf, Australia, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,866 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
10,866ha
GWIS perimeter (Copernicus)
Duration
15days
20 Oct 2021 – 3 Nov 2021
Municipalities hit
1
local government areas
Started on
20 Oct
2021
Heat detections
357
in a single hotspot: 65 MW
Danger at start
57
Extreme · FWI index
Average daily power
174MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Oct3 Nov
4 Nov 2021

How it evolved, day by day

20 Oct 2021 · 33 MW · 2 21 Oct 2021 · 7 MW · 1 22 Oct 2021 · 1 MW · 1 23 Oct 2021 · 99 MW · 3 24 Oct 2021 · 42 MW · 3 25 Oct 2021 · 42 MW · 10 26 Oct 2021 · 328 MW · 53 27 Oct 2021 · 254 MW · 34 28 Oct 2021 · 737 MW · 94 29 Oct 2021 · 413 MW · 77 30 Oct 2021 · 381 MW · 46 31 Oct 2021 · 139 MW · 10 1 Nov 2021 · 116 MW · 20 3 Nov 2021 · 8 MW · 1 4 Nov 2021 · 14 MW · 2
20 Oct 23 Oct 28 Oct 1 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
49km/h · peak gust
18%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 4.0 mm on 9 Nov.

This area had burned before

17% of the perimeter overlaps earlier fires recorded since 2016: 454 ha in 2017, 1,419 ha in 2018.

How big is it?

10 km
It burned the equivalent of 6.9% of the area of London (109 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    10,884 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Oct 40.7 °C 22 % 38 km/h 0.0 mm Extreme 57
21 Oct 40.8 °C 24 % 35 km/h 0.0 mm Extreme 57
22 Oct 40.3 °C 23 % 27 km/h 0.6 mm Very high 50
23 Oct 38.5 °C 30 % 47 km/h 2.6 mm Very high 40
24 Oct 38.0 °C 28 % 34 km/h 0.0 mm High 32
25 Oct 38.7 °C 22 % 36 km/h 0.0 mm Very high 41
26 Oct 39.3 °C 18 % 37 km/h 0.0 mm Very high 44
27 Oct 39.8 °C 23 % 33 km/h 0.0 mm Very high 38
28 Oct 40.4 °C 20 % 30 km/h 0.0 mm Very high 45
29 Oct 39.1 °C 22 % 34 km/h 0.0 mm Very high 43
30 Oct 39.3 °C 23 % 41 km/h 0.0 mm Very high 50
31 Oct 37.3 °C 32 % 34 km/h 0.0 mm Very high 44
1 Nov 39.5 °C 24 % 40 km/h 0.0 mm Extreme 56
2 Nov 37.4 °C 32 % 49 km/h 0.5 mm Extreme 55
3 Nov 39.0 °C 26 % 41 km/h 0.3 mm Extreme 59
4 Nov after 38.1 °C 31 % 48 km/h 0.3 mm Extreme 60
5 Nov after 40.3 °C 21 % 38 km/h 0.0 mm Extreme 51
6 Nov after 39.4 °C 24 % 34 km/h 0.0 mm Very high 45
7 Nov after 37.4 °C 32 % 32 km/h 0.3 mm Very high 41
8 Nov after 39.7 °C 25 % 29 km/h 0.1 mm Very high 38
9 Nov after 38.6 °C 31 % 27 km/h 4.0 mm Very high 39

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Oct 2021
After · 10 Nov 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 357Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 20 October 2021 to 3 November 2021 (15 days). The perimeter dates it from 24 October 2021 to 2 November 2021.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,866 hectares (108.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Roper Gulf (10,884 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 40.8 °C, humidity dropped to 18 % and gusts hit 49 km/h. The fire danger index (FWI) reached 59, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 2 November 2021 → 3 November 2021.
  2. Start date: 24 October 2021 → 20 October 2021.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 24 October 2021 to 2 November 2021. 357 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.