Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 29 September 2019 Roper Gulf

Out · last detection 26 Oct 2019, 04:20 UTC

The fire started on 29 September 2019 in Roper Gulf, Australia, and satellites saw it burning for 28 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 32,212 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
32,212ha
GWIS perimeter (Copernicus)
Duration
28days
29 Sept 2019 – 26 Oct 2019
Municipalities hit
1
local government areas
Started on
29 Sept
2019
Heat detections
1,161
in a single hotspot: 571 MW
Danger at start
63
Extreme · FWI index
Average daily power
724MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 29 Sept26 Oct
26 Oct 2019

How it evolved, day by day

29 Sept 2019 · 989 MW · 64 30 Sept 2019 · 3,655 MW · 100 1 Oct 2019 · 8,008 MW · 316 2 Oct 2019 · 1,455 MW · 78 3 Oct 2019 · 19 MW · 2 4 Oct 2019 · 173 MW · 30 5 Oct 2019 · 178 MW · 18 6 Oct 2019 · 385 MW · 30 7 Oct 2019 · 139 MW · 22 8 Oct 2019 · 389 MW · 30 9 Oct 2019 · 303 MW · 26 10 Oct 2019 · 854 MW · 51 11 Oct 2019 · 313 MW · 43 12 Oct 2019 · 669 MW · 84 13 Oct 2019 · 393 MW · 42 14 Oct 2019 · 316 MW · 23 15 Oct 2019 · 268 MW · 18 16 Oct 2019 · 54 MW · 6 17 Oct 2019 · 228 MW · 32 18 Oct 2019 · 122 MW · 25 19 Oct 2019 · 163 MW · 14 20 Oct 2019 · 213 MW · 24 21 Oct 2019 · 123 MW · 24 22 Oct 2019 · 55 MW · 12 23 Oct 2019 · 46 MW · 10 24 Oct 2019 · 68 MW · 10 25 Oct 2019 · 194 MW · 16 26 Oct 2019 · 512 MW · 11
1 Oct 11 Oct 17 Oct 23 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
56km/h · peak gust
3%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

13% of the perimeter overlaps earlier fires recorded since 2016: 633 ha in 2016, 2,339 ha in 2017, 1,112 ha in 2018.

How big is it?

10 km
It burned the equivalent of 20% of the area of London (322 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    32,421 ha reached on 29 Sept
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Sept 37.3 °C 17 % 47 km/h 0.0 mm Extreme 63
29 Sept 38.1 °C 12 % 41 km/h 0.0 mm Extreme 67
30 Sept 37.8 °C 14 % 42 km/h 0.0 mm Extreme 67
1 Oct 37.6 °C 17 % 49 km/h 0.0 mm Very extreme 72
2 Oct 39.1 °C 7 % 46 km/h 0.0 mm Very extreme 77
3 Oct 35.9 °C 21 % 45 km/h 0.0 mm Extreme 66
4 Oct 37.3 °C 14 % 53 km/h 0.0 mm Very extreme 76
5 Oct 34.7 °C 21 % 50 km/h 0.0 mm Very extreme 71
6 Oct 35.0 °C 19 % 41 km/h 0.0 mm Extreme 64
7 Oct 36.3 °C 14 % 39 km/h 0.0 mm Extreme 62
8 Oct 37.0 °C 23 % 45 km/h 0.0 mm Extreme 65
9 Oct 39.0 °C 10 % 50 km/h 0.0 mm Very extreme 76
10 Oct 38.5 °C 7 % 48 km/h 0.0 mm Very extreme 81
11 Oct 37.6 °C 3 % 46 km/h 0.0 mm Very extreme 81
12 Oct 38.0 °C 8 % 37 km/h 0.0 mm Very extreme 74
13 Oct 38.9 °C 7 % 44 km/h 0.0 mm Very extreme 79
14 Oct 39.6 °C 11 % 42 km/h 0.0 mm Very extreme 80
15 Oct 39.5 °C 13 % 41 km/h 0.0 mm Very extreme 74
16 Oct 39.9 °C 8 % 44 km/h 0.0 mm Very extreme 78
17 Oct 40.3 °C 12 % 40 km/h 0.0 mm Very extreme 76
18 Oct 39.6 °C 16 % 37 km/h 0.0 mm Extreme 70
19 Oct 40.4 °C 12 % 46 km/h 0.0 mm Very extreme 80
20 Oct 40.4 °C 7 % 55 km/h 0.0 mm Very extreme 92
21 Oct 39.3 °C 5 % 56 km/h 0.0 mm Very extreme 93
22 Oct 36.9 °C 21 % 47 km/h 0.0 mm Very extreme 71
23 Oct 35.1 °C 29 % 44 km/h 0.0 mm Extreme 57
24 Oct 36.0 °C 27 % 41 km/h 0.0 mm Extreme 57
25 Oct 37.8 °C 18 % 41 km/h 0.0 mm Extreme 60
26 Oct 37.8 °C 21 % 42 km/h 0.0 mm Extreme 62
27 Oct after 34.3 °C 34 % 35 km/h 0.3 mm Very high 46
28 Oct after 34.4 °C 18 % 49 km/h 1.4 mm Extreme 57
29 Oct after 34.6 °C 25 % 38 km/h 0.5 mm Very high 50
30 Oct after 37.1 °C 17 % 44 km/h 0.0 mm Extreme 62
31 Oct after 36.2 °C 22 % 37 km/h 0.0 mm Extreme 54
1 Nov after 38.1 °C 18 % 39 km/h 0.0 mm Extreme 60
2 Nov after 37.3 °C 21 % 45 km/h 0.1 mm Extreme 64
3 Nov after 38.3 °C 21 % 46 km/h 0.0 mm Extreme 67
4 Nov after 37.2 °C 26 % 36 km/h 0.5 mm Extreme 56
5 Nov after 38.5 °C 18 % 49 km/h 0.1 mm Extreme 61
6 Nov after 39.0 °C 8 % 47 km/h 0.0 mm Very extreme 77
7 Nov after 38.1 °C 20 % 42 km/h 0.0 mm Extreme 69
8 Nov after 39.8 °C 15 % 42 km/h 0.0 mm Extreme 68

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 22 Sept 2019
After · 2 Nov 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,161Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
GWIS (Copernicus) dates it between 29 September 2019 and 26 October 2019: 28 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 32,212 hectares (322.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Roper Gulf (32,421 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 40.4 °C, humidity dropped to 3 % and gusts hit 56 km/h. The fire danger index (FWI) reached 93, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,161 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.