Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 17 September 2018 Roper Gulf

Out · last detection 12 Oct 2018, 17:15 UTC

The fire started on 17 September 2018 in Roper Gulf, Australia, and satellites saw it burning for 26 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 82,291 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
82,291ha
GWIS perimeter (Copernicus)
Duration
26days
17 Sept 2018 – 12 Oct 2018
Municipalities hit
1
local government areas
Started on
17 Sept
2018
Heat detections
3,048
in a single hotspot: 146 MW
Danger at start
52
Extreme · FWI index
Average daily power
923MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Sept12 Oct
12 Oct 2018

How it evolved, day by day

17 Sept 2018 · 8 MW · 4 18 Sept 2018 · 796 MW · 104 19 Sept 2018 · 729 MW · 77 20 Sept 2018 · 454 MW · 99 21 Sept 2018 · 601 MW · 89 22 Sept 2018 · 305 MW · 69 23 Sept 2018 · 335 MW · 76 24 Sept 2018 · 43 MW · 8 25 Sept 2018 · 381 MW · 45 26 Sept 2018 · 60 MW · 3 27 Sept 2018 · 262 MW · 12 28 Sept 2018 · 670 MW · 74 29 Sept 2018 · 723 MW · 104 30 Sept 2018 · 491 MW · 75 1 Oct 2018 · 489 MW · 78 2 Oct 2018 · 294 MW · 72 3 Oct 2018 · 1,395 MW · 174 4 Oct 2018 · 785 MW · 154 5 Oct 2018 · 638 MW · 79 6 Oct 2018 · 940 MW · 138 7 Oct 2018 · 3,442 MW · 438 8 Oct 2018 · 2,742 MW · 326 9 Oct 2018 · 4,046 MW · 327 10 Oct 2018 · 1,670 MW · 180 11 Oct 2018 · 1,544 MW · 219 12 Oct 2018 · 148 MW · 24
17 Sept 23 Sept 29 Sept 9 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
57km/h · peak gust
9%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 1.7 mm on 17 Oct.

This area had burned before

6% of the perimeter overlaps earlier fires recorded since 2016: 1,730 ha in 2016, 4,273 ha in 2017. Part of it burned more than once, so the yearly figures add up to more than the 5,102 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 52% of the area of London (823 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    82,462 ha reached on 17 Sept
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Sept 34.1 °C 11 % 37 km/h 0.0 mm Extreme 52
11 Sept 33.4 °C 9 % 30 km/h 0.0 mm Extreme 54
12 Sept 34.5 °C 17 % 35 km/h 0.0 mm Extreme 52
13 Sept 34.8 °C 16 % 44 km/h 0.0 mm Extreme 61
14 Sept 35.2 °C 15 % 35 km/h 0.0 mm Extreme 55
15 Sept 36.0 °C 17 % 31 km/h 0.0 mm Extreme 50
16 Sept 35.6 °C 17 % 46 km/h 0.0 mm Extreme 61
17 Sept 35.9 °C 10 % 45 km/h 0.0 mm Extreme 61
18 Sept 36.6 °C 11 % 37 km/h 0.0 mm Extreme 56
19 Sept 36.3 °C 9 % 33 km/h 0.0 mm Extreme 54
20 Sept 34.8 °C 23 % 51 km/h 0.0 mm Extreme 60
21 Sept 34.7 °C 13 % 45 km/h 0.0 mm Extreme 57
22 Sept 35.4 °C 10 % 45 km/h 0.0 mm Extreme 60
23 Sept 35.4 °C 21 % 37 km/h 0.0 mm Extreme 51
24 Sept 35.1 °C 21 % 38 km/h 0.0 mm Extreme 51
25 Sept 35.2 °C 16 % 49 km/h 0.0 mm Extreme 59
26 Sept 34.6 °C 20 % 43 km/h 0.0 mm Extreme 57
27 Sept 35.5 °C 17 % 40 km/h 0.0 mm Extreme 56
28 Sept 35.5 °C 17 % 48 km/h 0.0 mm Extreme 62
29 Sept 35.0 °C 16 % 47 km/h 0.0 mm Extreme 61
30 Sept 35.6 °C 17 % 57 km/h 0.0 mm Extreme 69
1 Oct 35.8 °C 16 % 52 km/h 0.0 mm Extreme 63
2 Oct 34.4 °C 25 % 47 km/h 0.0 mm Extreme 58
3 Oct 37.5 °C 15 % 34 km/h 0.0 mm Extreme 53
4 Oct 37.9 °C 18 % 35 km/h 0.0 mm Extreme 51
5 Oct 38.0 °C 18 % 33 km/h 0.0 mm Very high 49
6 Oct 37.8 °C 19 % 33 km/h 0.0 mm Very high 50
7 Oct 38.4 °C 13 % 36 km/h 0.0 mm Extreme 54
8 Oct 39.3 °C 13 % 34 km/h 0.0 mm Extreme 54
9 Oct 38.5 °C 16 % 31 km/h 0.0 mm Extreme 56
10 Oct 38.4 °C 20 % 35 km/h 0.0 mm Extreme 58
11 Oct 38.0 °C 20 % 26 km/h 0.0 mm Extreme 52
12 Oct 37.4 °C 25 % 32 km/h 0.0 mm Very high 49
13 Oct after 38.1 °C 20 % 31 km/h 0.0 mm Extreme 53
14 Oct after 38.8 °C 22 % 44 km/h 0.0 mm Extreme 57
15 Oct after 38.5 °C 27 % 38 km/h 0.3 mm Extreme 52
16 Oct after 37.9 °C 23 % 35 km/h 0.1 mm Very high 49
17 Oct after 33.5 °C 45 % 37 km/h 1.7 mm High 22

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Sept 2018
After · 19 Oct 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 3,048Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
GWIS (Copernicus) dates it between 17 September 2018 and 12 October 2018: 26 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 82,291 hectares (822.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Roper Gulf (82,462 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 39.3 °C, humidity dropped to 9 % and gusts hit 57 km/h. The fire danger index (FWI) reached 69, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 3,048 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.