Skip to content
worldfires
VE · Venezuela · –

Rómulo Gallegos fire, 18 February 2019 Rómulo Gallegos

Out · last detection 23 Feb 2019, 17:51 UTC

The fire started on 18 February 2019 in Rómulo Gallegos, Venezuela, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,324 hectares from heat detections, spread across a single municipality.

It is the 330th largest in Apure since 2016 (of 761 with a page). Number 121 in Venezuela in 2019, of 296.

Burnt area
2,324ha
GWIS perimeter (Copernicus)
Duration
6days
18 Feb 2019 – 23 Feb 2019
Municipalities hit
1
municipalities
Started on
18 Feb
2019
Heat detections
78
in a single hotspot: 31 MW
Danger at start
42
Very high · FWI index
Average daily power
113MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 18 Feb23 Feb
23 Feb 2019

How it evolved, day by day

19 Feb 2019 · 90 MW · 16 20 Feb 2019 · 307 MW · 33 21 Feb 2019 · 99 MW · 23 22 Feb 2019 · 60 MW · 5 23 Feb 2019 · 10 MW · 1
19 Feb 20 Feb 21 Feb 22 Feb 23 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
49km/h · peak gust
35%lowest humidity

It had gone 59 days without rain (1 mm or more) when it started.

This area had burned before

44% of the perimeter overlaps earlier fires recorded since 2016: 111 ha in 2016, 992 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 1,021 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.5% of the area of London (23 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Rómulo Gallegos 24,418 inhabitants where it started
    2,338 ha reached on 19 Feb
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
18 Feb 33.0 °C 41 % 37 km/h 0.2 mm Very high 42
19 Feb 31.8 °C 42 % 41 km/h 0.5 mm Very high 40
20 Feb 34.8 °C 35 % 48 km/h 0.0 mm Very high 48
21 Feb 35.1 °C 35 % 48 km/h 0.0 mm Extreme 50
22 Feb 35.4 °C 36 % 49 km/h 0.0 mm Very high 48
23 Feb 35.1 °C 35 % 45 km/h 0.0 mm Very high 48
24 Feb after 34.4 °C 29 % 52 km/h 0.0 mm Extreme 62
25 Feb after 34.4 °C 32 % 50 km/h 0.0 mm Extreme 60
26 Feb after 35.1 °C 29 % 49 km/h 0.0 mm Extreme 62
27 Feb after 34.7 °C 36 % 49 km/h 0.0 mm Extreme 55
28 Feb after 35.1 °C 38 % 48 km/h 0.0 mm Extreme 56
1 Mar after 36.4 °C 32 % 43 km/h 0.0 mm Very high 46
2 Mar after 35.9 °C 35 % 40 km/h 0.0 mm Very high 42
3 Mar after 34.9 °C 37 % 32 km/h 0.0 mm Very high 41
4 Mar after 35.9 °C 35 % 34 km/h 0.0 mm Very high 44
5 Mar after 36.6 °C 33 % 40 km/h 0.0 mm Very high 48

Its twins: fires that started in the same weather

It started with an FWI of 42.1, a minimum humidity of 41% and 59 days without rain. Fires in the area that started in weather like this since 2016: 27.

FWI at the start 42.1
Minimum humidity 41 %
Days without rain 59
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Arauca fire, March 2016
5,687 ha 5 days FWI 42.4 Min. humidity 40 % 120 km away, in 2016

First rain (1 mm or more) after it ended: 3.1 mm on 16 Mar.

What happened to them

4 days
median duration
2,180 ha
median area
100 %
went past 1,000 ha
2.3 mm
rain at the end (median; 12 of 27 had it)

It burned an area similar to its twins (2,324 ha against a median of 2,180 ha) and lasted 6 days, against 4 days.

In 15 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
49km/h · max. gust

It was considered over on 23 Feb, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 12 of 27, with a median of 2.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 11 Feb 2019
After · 2 Mar 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 78Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Venezuela

Frequently asked questions

How long did the Rómulo Gallegos fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 18 February 2019 to 23 February 2019 (6 days). The perimeter dates it from 19 February 2019 to 22 February 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,324 hectares (23.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Rómulo Gallegos (2,338 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 35.4 °C, humidity dropped to 35 % and gusts hit 49 km/h. The fire danger index (FWI) reached 50, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Venezuela (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 27. Their median duration was 4 days and their median area 2,180 ha; 100 % went past 1,000 ha. In 15 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 22 February 2019 → 23 February 2019.
  2. Start date: 19 February 2019 → 18 February 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 19 February 2019 to 22 February 2019. 78 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.