Skip to content
worldfires
US · United States · –

Rock Canyon Fire, June 2026 Coconino

Out · last detection 18 Jun 2026, 21:33 UTC

The fire started on 15 June 2026 in Coconino, United States, and satellites saw it burning for 4 days. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 1,951 hectares, spread across a single county.

It is the 134th largest in Arizona since 2016 (of 380 with a page). Number 176 in United States in 2026, of 419.

Burnt area
1,951ha
official perimeter (MTBS / NIFC)
Duration
≈ 4days
15 Jun 2026 – 18 Jun 2026
Counties hit
1
counties
Started on
15 Jun
2026
Heat detections
130
in a single hotspot: 352 MW
Danger at start
50
Very high · FWI index
Average daily power
918MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Jun18 Jun
18 Jun 2026

How it evolved, day by day

15 Jun 2026 · 368 MW · 3 16 Jun 2026 · 1,520 MW · 32 17 Jun 2026 · 1,540 MW · 50 18 Jun 2026 · 246 MW · 45
15 Jun 16 Jun 17 Jun 18 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (10 passes) and with what wind. Watch the film

The weather it burned in

34°high
58km/h · peak gust
7%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.3 mm on 24 Jun.

This area had burned before

2% of the perimeter overlaps earlier fires recorded since 2016: 16 ha in 2020, 27 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 36 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.2% of the area of London (20 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

  1. Coconino where it started
    2,013 ha reached on 15 Jun
    0.0 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Very dry air: 40 % of the area in United States

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Jun 31.5 °C 11 % 44 km/h 0.0 mm Very high 50
16 Jun 33.3 °C 7 % 55 km/h 0.0 mm Very extreme 95
17 Jun 33.7 °C 9 % 58 km/h 0.0 mm Very extreme 106
18 Jun 32.8 °C 7 % 50 km/h 0.0 mm Very extreme 96
19 Jun after 32.4 °C 7 % 44 km/h 0.0 mm Extreme 67
20 Jun after 30.6 °C 5 % 53 km/h 0.0 mm Very extreme 82
21 Jun after 31.4 °C 4 % 40 km/h 0.0 mm Extreme 61
22 Jun after 32.3 °C 3 % 46 km/h 0.0 mm Extreme 68
23 Jun after 33.3 °C 5 % 58 km/h 0.0 mm Very extreme 94
24 Jun after 28.2 °C 17 % 52 km/h 1.3 mm Very extreme 91

Its twins: fires that started in the same weather

It started with an FWI of 49.6, a minimum humidity of 11% and rain the day before. Fires in the area that started in weather like this since 2016: 19.

FWI at the start 49.6
Minimum humidity 11 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Coco Fire, July 2016
906 ha 10 days FWI 44.3 Min. humidity 11 % 108 km away, in 2016

First rain (1 mm or more) after it ended: 7.1 mm on 1 Aug.

What happened to them

10 days
median duration
1,852 ha
median area
74 %
went past 1,000 ha
2.0 mm
rain at the end (median; 14 of 19 had it)

It burned an area similar to its twins (1,951 ha against a median of 1,852 ha) and lasted 4 days, against 10 days.

In 5 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.3 mmfirst rain
24 Jun6 days after it ended
58km/h · max. gust

It was considered over on 18 Jun, and on 24 Jun 1.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 14 of 19, with a median of 2.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Jun 2026
After · 25 Jun 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 14 June 2026 the air beside the fire reached 8 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak8 µg/m³
Days over the guideline0 days
PM1023 µg/m³
Optical depth0.23
13 Jun15 Jun17 Jun19 Jun21 Jun
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 130Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United States

Frequently asked questions

How long did the Rock Canyon Fire last?
The official perimeter only gives the start date (15 June 2026). The end comes from the heat detections inside the perimeter: it burned until 18 June 2026 (4 days from 15 June 2026), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The official perimeter published by United States agencies (MTBS / NIFC) is 1,951 hectares (19.5 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?
The fire only entered Coconino (2,013 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 33.7 °C, humidity dropped to 7 % and gusts hit 58 km/h. The fire danger index (FWI) reached 106, class Very extreme.
Where does this data come from?
From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 10 days and their median area 1,852 ha; 74 % went past 1,000 ha. In 5 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: NIFC WFIGS (United States), official.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 130 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.