Skip to content
worldfires
CM · Cameroon · –

Rey-Bouba fire, 11 December 2022 Rey-Bouba

Out · last detection 16 Dec 2022, 12:48 UTC

The fire started on 11 December 2022 in Rey-Bouba, Cameroon, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,064 hectares from heat detections, spread across a single municipality.

It is the 1107th largest in North since 2016 (of 1268 with a page). Number 170 in Cameroon in 2022, of 200.

Burnt area
1,064ha
GWIS perimeter (Copernicus)
Duration
6days
11 Dec 2022 – 16 Dec 2022
Municipalities hit
1
communes
Started on
11 Dec
2022
Heat detections
11
in a single hotspot: 162 MW
Danger at start
44
Very high · FWI index
Average daily power
241MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Dec16 Dec
16 Dec 2022

How it evolved, day by day

13 Dec 2022 · 273 MW · 7 16 Dec 2022 · 209 MW · 4
13 Dec 16 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
25km/h · peak gust
14%lowest humidity

It had gone 48 days without rain (1 mm or more) when it started.

This area had burned before

89% of the perimeter overlaps earlier fires recorded since 2016: 37 ha in 2016, 356 ha in 2019, 591 ha in 2020, 419 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 945 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 0.7% of the area of London (11 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Rey-Bouba where it started
    1,070 ha reached on 13 Dec
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Dec 35.6 °C 19 % 20 km/h 0.0 mm Very high 44
12 Dec 35.6 °C 16 % 19 km/h 0.0 mm Very high 44
13 Dec 36.0 °C 15 % 20 km/h 0.0 mm Very high 43
14 Dec 36.2 °C 16 % 19 km/h 0.0 mm Very high 44
15 Dec 35.9 °C 19 % 18 km/h 0.0 mm Very high 45
16 Dec 36.0 °C 14 % 25 km/h 0.0 mm Very high 47
17 Dec after 35.2 °C 15 % 22 km/h 0.0 mm Very high 45
18 Dec after 34.6 °C 12 % 22 km/h 0.0 mm Very high 46
19 Dec after 33.6 °C 12 % 19 km/h 0.0 mm Very high 46
20 Dec after 33.1 °C 17 % 26 km/h 0.0 mm Very high 46
21 Dec after 32.3 °C 20 % 23 km/h 0.0 mm Very high 44
22 Dec after 30.1 °C 23 % 26 km/h 0.0 mm Very high 41
23 Dec after 30.3 °C 22 % 23 km/h 0.0 mm Very high 39
24 Dec after 30.2 °C 23 % 22 km/h 0.0 mm Very high 40
25 Dec after 30.4 °C 21 % 22 km/h 0.0 mm Very high 39
26 Dec after 32.6 °C 19 % 22 km/h 0.0 mm Very high 39

Its twins: fires that started in the same weather

It started with an FWI of 44.0, a minimum humidity of 19% and 48 days without rain. Fires in the area that started in weather like this since 2016: 27.

FWI at the start 44.0
Minimum humidity 19 %
Days without rain 48
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Rey-Bouba fire, December 2019
1,152 ha 6 days FWI 43.4 Min. humidity 19 % 19 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

5 days
median duration
1,278 ha
median area
100 %
went past 1,000 ha
—
rain at the end (median; 0 of 27 had it)

It burned an area similar to its twins (1,064 ha against a median of 1,278 ha) and lasted 6 days, against 5 days.

In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
25km/h · max. gust

It was considered over on 16 Dec, and not even 1 mm fell in the following ten days: it went out without rain. None of its 27 twins had rain when they ended.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Dec 2022
After · 23 Dec 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 11 December 2022 the air beside the fire reached 66 µg/m³ of PM2.5. That day averaged 45: 3.0 times the WHO daily guideline (15).

PM2.5 peak66 µg/m³
Days over the guideline6 days
PM10122 µg/m³
Optical depth0.38
11 Dec13 Dec15 Dec17 Dec19 Dec
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 11Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Cameroon

Frequently asked questions

How long did the Rey-Bouba fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 11 December 2022 to 16 December 2022 (6 days). The perimeter dates it from 13 December 2022 to 16 December 2022.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,064 hectares (10.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Rey-Bouba (1,070 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 36.2 °C, humidity dropped to 14 % and gusts hit 25 km/h. The fire danger index (FWI) reached 47, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Cameroon (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 27. Their median duration was 5 days and their median area 1,278 ha; 100 % went past 1,000 ha. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 13 December 2022 → 11 December 2022.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 13 December 2022 to 16 December 2022. 11 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.