Skip to content
worldfires
AU · Australia · –

Ravensthorpe fire, 16 January 2026 Ravensthorpe, Jerramungup

Out · last detection

The fire started on in Ravensthorpe, Australia, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 99,747 hectares from heat detections, spread across 2 municipalities.

Number 2 in Australia in 2026, of 52.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…

Suggestions: Ravensthorpe · 2026

Burnt area
99,747ha
GWIS perimeter (Copernicus)
Duration
18days
16 Jan 2026 – 2 Feb 2026
Municipalities hit
2
local government areas
Started on
16 Jan
2026
Heat detections
3,358
in a single hotspot: 1,372 MW
Danger at start
36
High · FWI index
Average daily power
8.6GW
detected power per day, on average
Perimeter of “Ravensthorpe fire, 16 January 2026” on the satellite image of 5 February 2026
Perimeter (GWIS / Copernicus (reconstructed from VIIRS)) on the satellite image of : VIIRS Suomi-NPP (NASA), served by NASA GIBS

Where it burned

HOTSPOTS BY DAY 16 Jan2 Feb
1 Feb 2026

How it evolved, day by day

16 Jan 2026 · 19,154 MW · 740 17 Jan 2026 · 10,210 MW · 344 18 Jan 2026 · 8,669 MW · 279 19 Jan 2026 · 7,087 MW · 222 20 Jan 2026 · 4,105 MW · 169 21 Jan 2026 · 7,652 MW · 197 22 Jan 2026 · 47,515 MW · 673 23 Jan 2026 · 18,135 MW · 243 24 Jan 2026 · 3,471 MW · 147 25 Jan 2026 · 4,096 MW · 97 26 Jan 2026 · 6,024 MW · 158 27 Jan 2026 · 171 MW · 15 28 Jan 2026 · 626 MW · 51 29 Jan 2026 · 185 MW · 18 30 Jan 2026 · 24 MW · 3 1 Feb 2026 · 3 MW · 2
16 Jan 22 Jan 28 Jan

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (40 passes) and with what wind. Watch the film

The weather it burned in

35°high
50km/h · peak gust
20%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 12.5 mm on 10 Feb.

This area had burned before

3% of the perimeter overlaps earlier fires recorded since 2016: 2,229 ha in 2019, 423 ha in 2025.

How big is it?

10 km
It burned the equivalent of 63% of the area of London (997 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Ravensthorpe where it started
    65,619 ha
    6.6 %
  2. 34,657 ha
    5.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area8.5 ha
Residents< 20

Inside the perimeter there were about 8.5 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
16 Jan 30.2 °C 40 % 45 km/h 0.7 mm High 36
17 Jan 25.8 °C 46 % 44 km/h 0.0 mm High 28
18 Jan 22.1 °C 46 % 38 km/h 0.0 mm High 28
19 Jan 22.8 °C 49 % 42 km/h 0.0 mm High 32
20 Jan 23.8 °C 48 % 48 km/h 0.0 mm Very high 38
21 Jan 25.2 °C 50 % 49 km/h 0.0 mm Very high 43
22 Jan 34.8 °C 20 % 50 km/h 0.0 mm Extreme 58
23 Jan 23.5 °C 49 % 38 km/h 0.0 mm High 36
24 Jan 25.6 °C 43 % 34 km/h 0.0 mm High 24
25 Jan 27.2 °C 45 % 40 km/h 0.0 mm High 25
26 Jan 24.5 °C 38 % 42 km/h 0.1 mm Very high 42
27 Jan 19.8 °C 56 % 38 km/h 0.3 mm High 28
28 Jan 21.9 °C 50 % 39 km/h 0.0 mm High 32
29 Jan 24.9 °C 51 % 46 km/h 0.0 mm High 33
30 Jan 28.1 °C 49 % 41 km/h 0.0 mm High 29
31 Jan 21.8 °C 65 % 47 km/h 0.9 mm High 36
1 Feb 22.1 °C 59 % 49 km/h 0.7 mm Moderate 21
2 Feb 29.9 °C 35 % 35 km/h 0.0 mm High 31
3 Feb after 24.6 °C 33 % 50 km/h 0.8 mm Very high 42
4 Feb after 19.8 °C 58 % 41 km/h 0.3 mm High 22
5 Feb after 22.1 °C 55 % 44 km/h 0.0 mm High 30
6 Feb after 22.6 °C 56 % 40 km/h 0.0 mm High 28
7 Feb after 22.1 °C 54 % 42 km/h 0.0 mm High 32
8 Feb after 24.0 °C 56 % 45 km/h 0.0 mm High 34
9 Feb after 30.2 °C 41 % 45 km/h 0.1 mm Very high 38
10 Feb after 20.6 °C 79 % 44 km/h 12.5 mm Very low 0

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Jan 2026
After · 9 Feb 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 18 January 2026 the air beside the fire reached 91 µg/m³ of PM2.5. That day averaged 43: 2.8 times the WHO daily guideline (15).

PM2.5 peak91 µg/m³
Days over the guideline7 days
PM1095 µg/m³
Optical depth0.70
14 Jan19 Jan24 Jan29 Jan3 Feb
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 3,358Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Ravensthorpe fire last?
GWIS (Copernicus) dates it between 16 January 2026 and 2 February 2026: 18 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 99,747 hectares (997.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Ravensthorpe (65,619 ha, 6.6 %); Jerramungup (34,657 ha, 5.3 %).
What was the weather like?
During the fire the temperature reached 34.8 °C, humidity dropped to 20 % and gusts hit 50 km/h. The fire danger index (FWI) reached 58, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 3,358 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.