Skip to content
worldfires
AO · Angola · –

Quilenda fire, 14 September 2020 Quilenda

Out · last detection 6 Oct 2020, 13:01 UTC

The fire started on 14 September 2020 in Quilenda, Angola, and satellites saw it burning for 23 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,137 hectares from heat detections, spread across a single municipality.

It is the 6th largest in Cuanza Sul since 2016 (of 37 with a page). Number 24 in Angola in 2020, of 123.

Burnt area
9,137ha
GWIS perimeter (Copernicus)
Duration
23days
14 Sept 2020 – 6 Oct 2020
Municipalities hit
1
municipalities
Started on
14 Sept
2020
Heat detections
355
in a single hotspot: 110 MW
Danger at start
20
Moderate · FWI index
Average daily power
433MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Sept6 Oct
6 Oct 2020

How it evolved, day by day

14 Sept 2020 · 4 MW · 1 15 Sept 2020 · 97 MW · 9 17 Sept 2020 · 6 MW · 1 19 Sept 2020 · 1,020 MW · 26 20 Sept 2020 · 505 MW · 27 21 Sept 2020 · 1,027 MW · 43 22 Sept 2020 · 148 MW · 6 23 Sept 2020 · 749 MW · 31 24 Sept 2020 · 2,509 MW · 73 25 Sept 2020 · 225 MW · 18 26 Sept 2020 · 314 MW · 33 27 Sept 2020 · 4 MW · 1 28 Sept 2020 · 100 MW · 6 29 Sept 2020 · 837 MW · 29 30 Sept 2020 · 58 MW · 7 2 Oct 2020 · 276 MW · 23 3 Oct 2020 · 13 MW · 3 5 Oct 2020 · 337 MW · 17 6 Oct 2020 · 3 MW · 1
14 Sept 20 Sept 24 Sept 28 Sept 3 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

29°high
36km/h · peak gust
52%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started. Rain came after the fire: 13.8 mm on 15 Oct.

This area had burned before

64% of the perimeter overlaps earlier fires recorded since 2016: 1,761 ha in 2016, 3,298 ha in 2017, 1,248 ha in 2018, 2,098 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 5,854 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5.8% of the area of London (91 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Quilenda where it started
    9,194 ha reached on 14 Sept
    4.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area5.7 ha
Residents≈ 850

Inside the perimeter there were about 5.7 hectares of built-up land and about 850 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Sept 24.2 °C 59 % 31 km/h 0.0 mm Moderate 20
15 Sept 26.3 °C 57 % 32 km/h 0.0 mm Moderate 19
16 Sept 26.6 °C 53 % 33 km/h 0.0 mm Moderate 19
17 Sept 25.0 °C 59 % 30 km/h 0.1 mm Moderate 20
18 Sept 26.1 °C 66 % 34 km/h 0.0 mm Moderate 15
19 Sept 24.3 °C 68 % 33 km/h 1.4 mm Moderate 16
20 Sept 25.2 °C 62 % 35 km/h 0.2 mm Low 10
21 Sept 24.5 °C 59 % 34 km/h 0.1 mm Moderate 14
22 Sept 25.5 °C 53 % 35 km/h 1.7 mm Low 9
23 Sept 26.1 °C 59 % 36 km/h 0.0 mm Moderate 19
24 Sept 25.5 °C 54 % 32 km/h 0.0 mm Moderate 19
25 Sept 26.1 °C 53 % 33 km/h 0.0 mm Moderate 20
26 Sept 26.7 °C 52 % 35 km/h 0.0 mm High 22
27 Sept 25.4 °C 53 % 34 km/h 0.0 mm High 22
28 Sept 26.3 °C 53 % 35 km/h 0.0 mm High 22
29 Sept 26.6 °C 53 % 36 km/h 0.0 mm High 23
30 Sept 27.5 °C 57 % 34 km/h 0.9 mm High 22
1 Oct 25.5 °C 57 % 34 km/h 0.0 mm Moderate 12
2 Oct 25.9 °C 59 % 34 km/h 1.5 mm Moderate 18
3 Oct 26.3 °C 58 % 34 km/h 3.0 mm Moderate 12
4 Oct 25.9 °C 63 % 31 km/h 3.1 mm Very low 4
5 Oct 26.7 °C 62 % 34 km/h 1.4 mm Low 6
6 Oct 28.8 °C 56 % 31 km/h 0.0 mm Low 9
7 Oct after 25.7 °C 54 % 34 km/h 0.0 mm Moderate 14
8 Oct after 26.8 °C 54 % 34 km/h 0.0 mm Moderate 18
9 Oct after 25.7 °C 55 % 38 km/h 0.0 mm Moderate 20
10 Oct after 26.8 °C 51 % 35 km/h 0.0 mm Moderate 21
11 Oct after 26.2 °C 53 % 35 km/h 0.0 mm Moderate 21
12 Oct after 26.9 °C 52 % 36 km/h 0.0 mm Moderate 21
13 Oct after 27.1 °C 53 % 37 km/h 0.0 mm Moderate 21
14 Oct after 27.0 °C 60 % 32 km/h 0.5 mm Moderate 21
15 Oct after 25.6 °C 69 % 33 km/h 13.8 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 19.7, a minimum humidity of 59% and 8 days without rain. Fires in the area that started in weather like this since 2016: 4.

FWI at the start 19.7
Minimum humidity 59 %
Days without rain 8
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Cazengo fire, September 2024
6,146 ha 15 days FWI 13.5 Min. humidity 55 % 148 km away, in 2024

First rain (1 mm or more) after it ended: 1.2 mm on 28 Sept.

What happened to them

Fires in the area that started in similar weather: 4. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

13.8 mmfirst rain
15 Oct9 days after it ended
36km/h · max. gust

It was considered over on 6 Oct, and on 15 Oct 13.8 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Sept 2020
After · 13 Oct 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 355Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Angola

Frequently asked questions

How long did the Quilenda fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 14 September 2020 to 6 October 2020 (23 days). The perimeter dates it from 19 September 2020 to 2 October 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,137 hectares (91.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Quilenda (9,194 ha, 4.5 %).
What was the weather like?
During the fire the temperature reached 28.8 °C, humidity dropped to 52 % and gusts hit 36 km/h. The fire danger index (FWI) reached 23, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Angola (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 2 October 2020 → 6 October 2020.
  2. Start date: 19 September 2020 → 14 September 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 19 September 2020 to 2 October 2020. 355 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.