Skip to content
worldfires
ET · Ethiopia · –

Quara fire, 11 February 2020 Quara

Out · last detection 17 Feb 2020, 23:09 UTC

The fire started on 11 February 2020 in Quara, Ethiopia, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,181 hectares from heat detections, spread across a single municipality.

It is the 139th largest in Amhara since 2016 (of 159 with a page). Number 142 in Ethiopia in 2020, of 177.

Compare with…
Burnt area
2,181ha
GWIS perimeter (Copernicus)
Duration
7days
11 Feb 2020 – 17 Feb 2020
Municipalities hit
1
districts
Started on
11 Feb
2020
Heat detections
70
in a single hotspot: 43 MW
Danger at start
46
Very high · FWI index
Average daily power
91MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Feb17 Feb
17 Feb 2020

How it evolved, day by day

11 Feb 2020 · 56 MW · 12 12 Feb 2020 · 118 MW · 15 13 Feb 2020 · 203 MW · 10 14 Feb 2020 · 81 MW · 22 15 Feb 2020 · 76 MW · 7 17 Feb 2020 · 10 MW · 4
11 Feb 13 Feb 15 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
38km/h · peak gust
15%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

67% of the perimeter overlaps earlier fires recorded since 2016: 811 ha in 2016, 1,031 ha in 2017, 39 ha in 2018, 900 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 1,451 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.4% of the area of London (22 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Quara where it started
    2,194 ha reached on 11 Feb
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 37 % of the area in Ethiopia

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Feb 31.0 °C 21 % 38 km/h 0.0 mm Very high 46
12 Feb 31.1 °C 19 % 31 km/h 0.0 mm Very high 43
13 Feb 34.0 °C 19 % 30 km/h 0.0 mm Very high 42
14 Feb 36.0 °C 20 % 25 km/h 0.0 mm Very high 39
15 Feb 35.4 °C 20 % 26 km/h 0.0 mm Very high 40
16 Feb 35.2 °C 20 % 26 km/h 0.0 mm Very high 42
17 Feb 37.6 °C 15 % 28 km/h 0.0 mm Very high 48
18 Feb after 37.0 °C 16 % 32 km/h 0.0 mm Very high 50
19 Feb after 36.7 °C 11 % 38 km/h 0.0 mm Extreme 56
20 Feb after 35.5 °C 13 % 34 km/h 0.0 mm Extreme 54
21 Feb after 36.5 °C 13 % 36 km/h 0.0 mm Extreme 56
22 Feb after 36.8 °C 13 % 32 km/h 0.0 mm Extreme 53
23 Feb after 36.4 °C 17 % 30 km/h 0.0 mm Extreme 52
24 Feb after 34.5 °C 13 % 35 km/h 0.0 mm Extreme 56
25 Feb after 32.7 °C 16 % 37 km/h 0.0 mm Extreme 55
26 Feb after 35.9 °C 17 % 36 km/h 0.0 mm Extreme 56
27 Feb after 38.0 °C 16 % 32 km/h 0.0 mm Extreme 52

Its twins: fires that started in the same weather

It started with an FWI of 46.0, a minimum humidity of 21% and more than two months without rain. Fires in the area that started in weather like this since 2016: 38.

FWI at the start 46.0
Minimum humidity 21 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Quara fire, January 2020
2,457 ha 7 days FWI 46.1 Min. humidity 21 % 45 km away, in 2020

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

6 days
median duration
2,836 ha
median area
100 %
went past 1,000 ha
4.2 mm
rain at the end (median; 1 of 38 had it)

It burned an area similar to its twins (2,181 ha against a median of 2,836 ha) and lasted 7 days, against 6 days.

In 37 of 38, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
38km/h · max. gust

It was considered over on 17 Feb, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 1 of 38, with a median of 4.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Feb 2020
After · 24 Feb 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 70Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ethiopia

Frequently asked questions

How long did the Quara fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 11 February 2020 to 17 February 2020 (7 days). The perimeter dates it from 11 February 2020 to 15 February 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,181 hectares (21.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Quara (2,194 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 37.6 °C, humidity dropped to 15 % and gusts hit 38 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ethiopia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 38. Their median duration was 6 days and their median area 2,836 ha; 100 % went past 1,000 ha. In 37 of 38, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 15 February 2020 → 17 February 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 11 February 2020 to 15 February 2020. 70 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.