Skip to content
worldfires
RU · Russia · –

Purovsky Rayon fire, 31 July 2026 Purovsky Rayon

Out · last detection 26 Aug 2026, 08:18 UTC

The fire started on 31 July 2026 in Purovsky Rayon, Russia, and satellites saw it burning for 27 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 135,875 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

Number 6 in Russia in 2026, of 420.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…

Suggestions: Nadymsky Rayon · 2016

Burnt area
135,875ha
GWIS perimeter (Copernicus)
Duration
27days
31 Jul 2026 – 26 Aug 2026
Municipalities hit
1
districts
Started on
31 Jul
2026
Heat detections
21,223
in a single hotspot: 380 MW
Danger at start
5
Very low · FWI index
Average daily power
6.8GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 31 Jul26 Aug
26 Aug 2026

How it evolved, day by day

31 Jul 2026 · 206 MW · 11 2 Aug 2026 · 53 MW · 20 3 Aug 2026 · 3,883 MW · 259 4 Aug 2026 · 5,068 MW · 307 5 Aug 2026 · 118 MW · 70 6 Aug 2026 · 4,385 MW · 216 7 Aug 2026 · 29 MW · 7 8 Aug 2026 · 19 MW · 3 9 Aug 2026 · 166 MW · 56 10 Aug 2026 · 155 MW · 29 11 Aug 2026 · 454 MW · 79 12 Aug 2026 · 565 MW · 96 13 Aug 2026 · 3,462 MW · 415 14 Aug 2026 · 8,779 MW · 976 15 Aug 2026 · 10,590 MW · 1142 16 Aug 2026 · 9,901 MW · 1307 17 Aug 2026 · 12,469 MW · 1520 18 Aug 2026 · 33,569 MW · 2865 19 Aug 2026 · 26,036 MW · 3309 20 Aug 2026 · 7,014 MW · 1432 21 Aug 2026 · 7,910 MW · 1267 22 Aug 2026 · 11,605 MW · 1524 23 Aug 2026 · 6,494 MW · 984 24 Aug 2026 · 5,745 MW · 1265 25 Aug 2026 · 16,907 MW · 1974 26 Aug 2026 · 907 MW · 90
31 Jul 7 Aug 13 Aug 18 Aug 25 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (116 passes) and with what wind. Watch the film

The weather it burned in

28°high
50km/h · peak gust
35%lowest humidity

It had gone 17 days without rain (1 mm or more) when it started. Rain came after the fire: 5.0 mm on 27 Aug.

This area had burned before

0% of the perimeter overlaps earlier fires recorded since 2016: 553 ha in 2016, 56 ha in 2017.

How big is it?

10 km
It burned the equivalent of 86% of the area of London (1,359 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Purovsky Rayon where it started
    138,727 ha reached on 31 Jul
    1.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
31 Jul 27.5 °C 64 % 31 km/h 8.7 mm Very low 5
1 Aug 20.8 °C 63 % 35 km/h 0.0 mm Very low 2
2 Aug 16.4 °C 68 % 26 km/h 0.0 mm Very low 3
3 Aug 19.8 °C 42 % 34 km/h 0.0 mm Moderate 11
4 Aug 22.0 °C 36 % 40 km/h 0.0 mm High 22
5 Aug 17.9 °C 66 % 30 km/h 0.3 mm Low 11
6 Aug 20.2 °C 47 % 34 km/h 0.0 mm Moderate 17
7 Aug 14.1 °C 80 % 36 km/h 7.9 mm Very low 4
8 Aug 15.4 °C 54 % 30 km/h 0.5 mm Very low 2
9 Aug 16.6 °C 53 % 37 km/h 0.3 mm Very low 5
10 Aug 18.4 °C 49 % 23 km/h 0.2 mm Low 7
11 Aug 18.9 °C 61 % 30 km/h 0.5 mm Low 11
12 Aug 20.3 °C 45 % 47 km/h 0.0 mm High 23
13 Aug 21.8 °C 39 % 42 km/h 0.0 mm High 24
14 Aug 22.7 °C 41 % 35 km/h 0.0 mm Moderate 21
15 Aug 24.3 °C 42 % 36 km/h 0.0 mm High 23
16 Aug 23.8 °C 40 % 40 km/h 0.0 mm High 28
17 Aug 22.9 °C 38 % 46 km/h 0.0 mm High 33
18 Aug 23.7 °C 37 % 41 km/h 0.0 mm High 31
19 Aug 25.8 °C 36 % 37 km/h 0.1 mm High 28
20 Aug 25.0 °C 37 % 23 km/h 0.0 mm Moderate 20
21 Aug 25.1 °C 35 % 23 km/h 0.0 mm Moderate 21
22 Aug 23.0 °C 39 % 27 km/h 0.0 mm High 23
23 Aug 23.5 °C 37 % 26 km/h 0.0 mm High 24
24 Aug 23.2 °C 41 % 25 km/h 0.0 mm High 23
25 Aug 24.4 °C 36 % 46 km/h 0.0 mm Very high 40
26 Aug 21.9 °C 59 % 50 km/h 4.5 mm High 27
27 Aug after 17.1 °C 73 % 60 km/h 5.0 mm Very low 3

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Jul 2026
After · 2 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 21 August 2026 the air beside the fire reached 1,300 µg/m³ of PM2.5. That day averaged 685: 46 times the WHO daily guideline (15).

PM2.5 peak1,300 µg/m³
Days over the guideline28 days
PM101,315 µg/m³
Optical depth4.81
29 Jul5 Aug12 Aug19 Aug26 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 21,223Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Purovsky Rayon fire last?
GWIS (Copernicus) dates it between 31 July 2026 and 26 August 2026: 27 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 135,875 hectares (1,358.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Purovsky Rayon (138,727 ha, 1.3 %).
What was the weather like?
During the fire the temperature reached 27.5 °C, humidity dropped to 35 % and gusts hit 50 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 21,223 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.