Skip to content
worldfires
PY · Paraguay · –

Puerto Pinasco fire, 5 September 2024 Puerto Pinasco

Out · last detection

The fire started on in Puerto Pinasco, Paraguay, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,693 hectares from heat detections, spread across a single municipality.

It is number 292 by size of the 709 fires with a page that started in PRESIDENTE HAYES since 2016. Number 76 in Paraguay in 2024, of 188.

Burnt area
2,693ha
GWIS perimeter (Copernicus)
Duration
7days
5 Sept 2024 – 11 Sept 2024
Municipalities hit
1
districts
Started on
5 Sept
2024
Heat detections
105
in a single hotspot: 149 MW
Danger at start
29
High · FWI index
Average daily power
253MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Sept11 Sept
11 Sept 2024

How it evolved, day by day

5 Sept 2024 · 229 MW · 6 6 Sept 2024 · 47 MW · 8 7 Sept 2024 · 1,160 MW · 31 8 Sept 2024 · 59 MW · 18 9 Sept 2024 · 237 MW · 31 10 Sept 2024 · 33 MW · 9 11 Sept 2024 · 5 MW · 2
5 Sept 7 Sept 9 Sept 11 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
57km/h · peak gust
13%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started. Rain came after the fire: 17.5 mm on 13 Sept.

This area had burned before

28% of the perimeter overlaps earlier fires recorded since 2016: 45 ha in 2018, 334 ha in 2019, 776 ha in 2020, 377 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 767 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.7% of the area of London (27 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Puerto Pinasco where it started
    2,702 ha reached on 5 Sept
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.10 ha
Residents< 20

Inside the perimeter there were about 0.10 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Sept 25.9 °C 29 % 45 km/h 0.0 mm High 29
6 Sept 31.4 °C 28 % 32 km/h 0.0 mm High 27
7 Sept 39.1 °C 15 % 51 km/h 0.0 mm Very high 44
8 Sept 39.0 °C 17 % 38 km/h 0.0 mm Very high 41
9 Sept 39.5 °C 13 % 44 km/h 0.0 mm Extreme 50
10 Sept 38.7 °C 13 % 52 km/h 0.0 mm Extreme 64
11 Sept 40.4 °C 18 % 57 km/h 0.0 mm Very extreme 76
12 Sept after 29.5 °C 38 % 32 km/h 0.1 mm High 27
13 Sept after 35.9 °C 38 % 44 km/h 17.5 mm High 27

Its twins: fires that started in the same weather

It started with an FWI of 29.2, a minimum humidity of 29% and 11 days without rain. Fires in the area that started in weather like this since 2016: 49.

FWI at the start 29.2
Minimum humidity 29 %
Days without rain 11
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Puerto Pinasco fire, September 2020
39,142 ha 14 days FWI 28.3 Min. humidity 29 % 8 km away, in 2020

First rain (1 mm or more) after it ended: 1.2 mm on 14 Oct.

What happened to them

5 days
median duration
2,135 ha
median area
100 %
went past 1,000 ha
4.4 mm
rain at the end (median; 39 of 49 had it)

It burned an area similar to its twins (2,693 ha against a median of 2,135 ha) and lasted 7 days, against 5 days.

In 10 of 49, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

17.5 mmfirst rain
13 Sept2 days after it ended
57km/h · max. gust

It was considered over on 11 Sept, and on 13 Sept 17.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 39 of 49, with a median of 4.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Aug 2024
After · 18 Sept 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 12 September 2024 the air beside the fire reached 184 µg/m³ of PM2.5. That day averaged 90: 6.0 times the WHO daily guideline (15).

PM2.5 peak184 µg/m³
Days over the guideline12 days
PM10264 µg/m³
Optical depth7.52
3 Sept6 Sept9 Sept12 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 105Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the Puerto Pinasco fire last?
GWIS (Copernicus) dates it between 5 September 2024 and 11 September 2024: 7 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,693 hectares (26.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Puerto Pinasco (2,702 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 40.4 °C, humidity dropped to 13 % and gusts hit 57 km/h. The fire danger index (FWI) reached 76, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 49. Their median duration was 5 days and their median area 2,135 ha; 100 % went past 1,000 ha. In 10 of 49, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 105 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.