Skip to content
worldfires
PY · Paraguay · –

Puerto Pinasco fire, 24 August 2017 Puerto Pinasco, Tte 1Ro Manuel Irala Fernandez

Out · last detection 10 Sept 2017, 16:59 UTC

The fire started on 24 August 2017 in Puerto Pinasco, Paraguay, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 20,550 hectares from heat detections, spread across 2 municipalities.

It is the 14th largest in PRESIDENTE HAYES since 2016 (of 709 with a page). The largest in Paraguay in 2017, of 261.

Burnt area
20,550ha
GWIS perimeter (Copernicus)
Duration
18days
24 Aug 2017 – 10 Sept 2017
Municipalities hit
2
districts
Started on
24 Aug
2017
Heat detections
857
in a single hotspot: 117 MW
Danger at start
32
High · FWI index
Average daily power
604MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Aug10 Sept
10 Sept 2017

How it evolved, day by day

24 Aug 2017 · 304 MW · 20 25 Aug 2017 · 699 MW · 82 26 Aug 2017 · 649 MW · 51 27 Aug 2017 · 1,186 MW · 77 28 Aug 2017 · 1,881 MW · 151 29 Aug 2017 · 2,233 MW · 148 30 Aug 2017 · 109 MW · 30 31 Aug 2017 · 236 MW · 56 1 Sept 2017 · 1,199 MW · 66 2 Sept 2017 · 585 MW · 96 3 Sept 2017 · 258 MW · 30 4 Sept 2017 · 281 MW · 40 7 Sept 2017 · 18 MW · 5 8 Sept 2017 · 2 MW · 1 9 Sept 2017 · 19 MW · 2 10 Sept 2017 · 9 MW · 2
24 Aug 29 Aug 1 Sept 7 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
87km/h · peak gust
21%lowest humidity

It had gone 7 days without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 11 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 13% of the area of London (206 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Puerto Pinasco where it started
    19,485 ha reached on 24 Aug
    1.3 %
  2. 1,111 ha reached on 25 Aug
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 23 % of the area in Paraguay

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Aug 36.0 °C 34 % 64 km/h 0.0 mm High 32
25 Aug 36.3 °C 29 % 53 km/h 0.0 mm High 36
26 Aug 36.6 °C 33 % 58 km/h 0.0 mm High 34
27 Aug 35.9 °C 35 % 52 km/h 0.8 mm High 26
28 Aug 38.0 °C 28 % 51 km/h 0.0 mm High 38
29 Aug 38.5 °C 27 % 50 km/h 0.0 mm Very high 40
30 Aug 27.9 °C 49 % 50 km/h 0.0 mm High 25
31 Aug 26.9 °C 42 % 36 km/h 0.0 mm Moderate 14
1 Sept 36.7 °C 28 % 36 km/h 0.0 mm High 29
2 Sept 37.9 °C 22 % 49 km/h 0.0 mm Very high 42
3 Sept 37.3 °C 23 % 52 km/h 0.0 mm Very high 47
4 Sept 36.7 °C 24 % 54 km/h 0.0 mm Very high 39
5 Sept 22.1 °C 58 % 52 km/h 0.0 mm Moderate 21
6 Sept 29.8 °C 44 % 28 km/h 0.0 mm Moderate 18
7 Sept 36.6 °C 21 % 41 km/h 0.0 mm Very high 45
8 Sept 36.6 °C 25 % 50 km/h 0.0 mm Very high 46
9 Sept 38.0 °C 28 % 64 km/h 0.0 mm Extreme 59
10 Sept 38.3 °C 29 % 87 km/h 1.8 mm Very extreme 72
11 Sept after 25.7 °C 43 % 58 km/h 1.0 mm Low 9

Its twins: fires that started in the same weather

It started with an FWI of 32.2, a minimum humidity of 34% and 7 days without rain. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 32.2
Minimum humidity 34 %
Days without rain 7
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Puerto Pinasco fire, September 2021
1,732 ha 11 days FWI 31.5 Min. humidity 33 % 7 km away, in 2021

First rain (1 mm or more) after it ended: 6.8 mm on 3 Oct.

What happened to them

4 days
median duration
1,908 ha
median area
100 %
went past 1,000 ha
4.1 mm
rain at the end (median; 19 of 21 had it)

It was 10.8 times larger than the median of its twins and lasted 18 days, against 4 days.

None of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.0 mmfirst rain
11 Septthe day after it ended
87km/h · max. gust

It was considered over on 10 Sept, and on 11 Sept 1.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 19 of 21, with a median of 4.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Aug 2017
After · 17 Sept 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 857Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the Puerto Pinasco fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 24 August 2017 to 10 September 2017 (18 days). The perimeter dates it from 24 August 2017 to 4 September 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 20,550 hectares (205.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Puerto Pinasco (19,485 ha, 1.3 %); Tte 1Ro Manuel Irala Fernandez (1,111 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 38.5 °C, humidity dropped to 21 % and gusts hit 87 km/h. The fire danger index (FWI) reached 72, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 4 days and their median area 1,908 ha; 100 % went past 1,000 ha. None of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 4 September 2017 → 10 September 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 24 August 2017 to 4 September 2017. 857 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.