Skip to content
worldfires
CO · Colombia · –

Puerto Gaitán fire, 9 February 2017 Puerto Gaitán

Out · last detection 16 Feb 2017, 18:10 UTC

The fire started on 9 February 2017 in Puerto Gaitán, Colombia, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,231 hectares from heat detections, spread across a single municipality.

It is the 14th largest in Meta since 2016 (of 214 with a page). Number 4 in Colombia in 2017, of 68.

Burnt area
7,231ha
GWIS perimeter (Copernicus)
Duration
8days
9 Feb 2017 – 16 Feb 2017
Municipalities hit
1
municipalities
Started on
9 Feb
2017
Heat detections
177
in a single hotspot: 125 MW
Danger at start
29
High · FWI index
Average daily power
327MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Feb16 Feb
16 Feb 2017

How it evolved, day by day

9 Feb 2017 · 2 MW · 1 10 Feb 2017 · 2 MW · 1 11 Feb 2017 · 248 MW · 31 12 Feb 2017 · 734 MW · 40 13 Feb 2017 · 1,424 MW · 73 14 Feb 2017 · 149 MW · 25 15 Feb 2017 · 40 MW · 3 16 Feb 2017 · 14 MW · 3
9 Feb 11 Feb 13 Feb 15 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
53km/h · peak gust
32%lowest humidity

It had gone 7 days without rain (1 mm or more) when it started. Rain came after the fire: 12.9 mm on 22 Feb.

This area had burned before

25% of the perimeter overlaps earlier fires recorded since 2016: 1,779 ha in 2016.

How big is it?

10 km
It burned the equivalent of 4.6% of the area of London (72 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Puerto Gaitán 41,017 inhabitants where it started
    7,275 ha reached on 9 Feb
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.55 ha
Residents< 20

Inside the perimeter there were about 0.55 hectares of built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Feb 32.8 °C 42 % 49 km/h 0.0 mm High 29
10 Feb 33.1 °C 42 % 53 km/h 0.0 mm High 32
11 Feb 32.9 °C 40 % 52 km/h 0.0 mm High 37
12 Feb 33.7 °C 39 % 53 km/h 0.0 mm High 35
13 Feb 34.4 °C 32 % 51 km/h 0.0 mm Very high 39
14 Feb 34.9 °C 32 % 47 km/h 0.0 mm High 37
15 Feb 34.1 °C 36 % 30 km/h 0.0 mm High 29
16 Feb 34.1 °C 39 % 35 km/h 0.0 mm High 27
17 Feb after 34.5 °C 35 % 41 km/h 0.0 mm High 33
18 Feb after 35.3 °C 31 % 42 km/h 0.0 mm Very high 40
19 Feb after 35.5 °C 28 % 43 km/h 0.0 mm Very high 46
20 Feb after 34.4 °C 41 % 32 km/h 0.0 mm High 30
21 Feb after 35.2 °C 40 % 31 km/h 0.6 mm High 24
22 Feb after 32.8 °C 53 % 35 km/h 12.9 mm Very low 4

Its twins: fires that started in the same weather

It started with an FWI of 29.0, a minimum humidity of 42% and 7 days without rain. Fires in the area that started in weather like this since 2016: 16.

FWI at the start 29.0
Minimum humidity 42 %
Days without rain 7
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Puerto Gaitán fire, January 2016
3,209 ha 5 days FWI 29.2 Min. humidity 41 % 29 km away, in 2016

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

5 days
median duration
2,086 ha
median area
100 %
went past 1,000 ha
3.7 mm
rain at the end (median; 12 of 16 had it)

It was 3.5 times larger than the median of its twins and lasted 8 days, against 5 days.

None of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

12.9 mmfirst rain
22 Feb6 days after it ended
53km/h · max. gust

It was considered over on 16 Feb, and on 22 Feb 12.9 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 12 of 16, with a median of 3.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Feb 2017
After · 23 Feb 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 177Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Colombia

Frequently asked questions

How long did the Puerto Gaitán fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 9 February 2017 to 16 February 2017 (8 days). The perimeter dates it from 11 February 2017 to 15 February 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,231 hectares (72.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Puerto Gaitán (7,275 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 34.9 °C, humidity dropped to 32 % and gusts hit 53 km/h. The fire danger index (FWI) reached 39, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Colombia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 16. Their median duration was 5 days and their median area 2,086 ha; 100 % went past 1,000 ha. None of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 123 · 119 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 123 · 119.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 11 February 2017 to 15 February 2017. 177 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.