Skip to content
worldfires
AU · Australia · –

Pormpuraaw fire, September 2018 Pormpuraaw, Aurukun

Out · last detection 14 Oct 2018, 03:49 UTC

The fire started on 10 September 2018 in Pormpuraaw, Australia, and satellites saw it burning for 35 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 29,355 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
29,355ha
GWIS perimeter (Copernicus)
Duration
35days
10 Sept 2018 – 14 Oct 2018
Municipalities hit
2
local government areas
Started on
10 Sept
2018
Heat detections
989
in a single hotspot: 324 MW
Danger at start
55
Extreme · FWI index
Average daily power
403MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Sept14 Oct
14 Oct 2018

How it evolved, day by day

10 Sept 2018 · 186 MW · 13 12 Sept 2018 · 8 MW · 2 13 Sept 2018 · 3 MW · 1 14 Sept 2018 · 309 MW · 14 15 Sept 2018 · 132 MW · 24 16 Sept 2018 · 884 MW · 48 17 Sept 2018 · 753 MW · 69 18 Sept 2018 · 150 MW · 16 19 Sept 2018 · 79 MW · 10 20 Sept 2018 · 354 MW · 20 21 Sept 2018 · 3,494 MW · 140 22 Sept 2018 · 976 MW · 98 23 Sept 2018 · 854 MW · 71 24 Sept 2018 · 120 MW · 17 25 Sept 2018 · 277 MW · 28 26 Sept 2018 · 167 MW · 25 27 Sept 2018 · 550 MW · 35 28 Sept 2018 · 128 MW · 8 29 Sept 2018 · 259 MW · 27 30 Sept 2018 · 423 MW · 46 1 Oct 2018 · 131 MW · 20 2 Oct 2018 · 1,080 MW · 66 3 Oct 2018 · 73 MW · 8 4 Oct 2018 · 129 MW · 14 5 Oct 2018 · 158 MW · 13 6 Oct 2018 · 97 MW · 27 7 Oct 2018 · 205 MW · 18 8 Oct 2018 · 386 MW · 19 9 Oct 2018 · 930 MW · 39 10 Oct 2018 · 63 MW · 10 11 Oct 2018 · 39 MW · 14 12 Oct 2018 · 199 MW · 23 13 Oct 2018 · 18 MW · 3 14 Oct 2018 · 89 MW · 3
10 Sept 21 Sept 2 Oct 9 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
50km/h · peak gust
14%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

36% of the perimeter overlaps earlier fires recorded since 2016: 5,663 ha in 2016, 5,071 ha in 2017.

How big is it?

10 km
It burned the equivalent of 19% of the area of London (294 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Pormpuraaw where it started
    29,588 ha
    6.7 %
  2. 96 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Sept 35.4 °C 20 % 41 km/h 0.0 mm Extreme 55
11 Sept 34.6 °C 23 % 39 km/h 0.0 mm Extreme 52
12 Sept 34.9 °C 20 % 38 km/h 0.0 mm Extreme 54
13 Sept 35.3 °C 19 % 42 km/h 0.0 mm Extreme 58
14 Sept 35.9 °C 21 % 45 km/h 0.0 mm Extreme 61
15 Sept 35.2 °C 23 % 36 km/h 0.0 mm Very high 48
16 Sept 35.6 °C 21 % 40 km/h 0.0 mm Very high 44
17 Sept 35.1 °C 20 % 40 km/h 0.0 mm Very high 45
18 Sept 35.5 °C 16 % 40 km/h 0.0 mm Extreme 56
19 Sept 35.5 °C 18 % 37 km/h 0.0 mm Extreme 58
20 Sept 36.7 °C 16 % 36 km/h 0.0 mm Extreme 57
21 Sept 36.5 °C 20 % 42 km/h 0.0 mm Extreme 68
22 Sept 36.5 °C 20 % 45 km/h 0.0 mm Extreme 68
23 Sept 35.4 °C 21 % 45 km/h 0.0 mm Extreme 60
24 Sept 35.0 °C 17 % 41 km/h 0.0 mm Extreme 59
25 Sept 35.4 °C 15 % 42 km/h 0.0 mm Extreme 63
26 Sept 35.3 °C 16 % 40 km/h 0.0 mm Extreme 58
27 Sept 35.4 °C 17 % 41 km/h 0.0 mm Extreme 61
28 Sept 35.0 °C 16 % 43 km/h 0.0 mm Extreme 63
29 Sept 35.3 °C 16 % 47 km/h 0.0 mm Extreme 67
30 Sept 34.7 °C 20 % 49 km/h 0.0 mm Very extreme 73
1 Oct 36.2 °C 17 % 46 km/h 0.0 mm Extreme 64
2 Oct 37.2 °C 14 % 50 km/h 0.0 mm Very extreme 75
3 Oct 36.1 °C 20 % 40 km/h 0.0 mm Extreme 56
4 Oct 36.0 °C 19 % 38 km/h 0.0 mm Very high 48
5 Oct 31.5 °C 44 % 39 km/h 0.0 mm Very high 42
6 Oct 35.9 °C 24 % 36 km/h 0.0 mm Very high 39
7 Oct 35.3 °C 30 % 41 km/h 0.0 mm Very high 40
8 Oct 35.4 °C 28 % 44 km/h 0.0 mm High 37
9 Oct 37.8 °C 20 % 35 km/h 0.0 mm Very high 45
10 Oct 38.5 °C 21 % 36 km/h 0.0 mm Very high 45
11 Oct 36.2 °C 28 % 45 km/h 0.0 mm High 35
12 Oct 36.0 °C 32 % 45 km/h 0.0 mm High 35
13 Oct 35.3 °C 37 % 44 km/h 0.5 mm Very high 40
14 Oct 35.6 °C 34 % 31 km/h 0.8 mm Very high 38
15 Oct after 37.7 °C 27 % 41 km/h 0.0 mm Very high 38
16 Oct after 36.4 °C 32 % 46 km/h 0.0 mm Very high 39
17 Oct after 37.0 °C 23 % 45 km/h 0.0 mm Very high 40
18 Oct after 36.7 °C 25 % 42 km/h 0.0 mm Very high 40
19 Oct after 37.2 °C 27 % 33 km/h 0.0 mm Very high 43
20 Oct after 37.8 °C 25 % 32 km/h 0.0 mm Extreme 52
21 Oct after 36.6 °C 30 % 46 km/h 0.0 mm High 36
22 Oct after 35.6 °C 39 % 34 km/h 0.0 mm Very high 39
23 Oct after 36.6 °C 33 % 36 km/h 0.0 mm High 34
24 Oct after 37.0 °C 28 % 33 km/h 0.0 mm Very high 41

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Sept 2018
After · 21 Oct 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 989Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Pormpuraaw fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 September 2018 to 14 October 2018 (35 days). The perimeter dates it from 14 September 2018 to 14 October 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 29,355 hectares (293.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Pormpuraaw (29,588 ha, 6.7 %); Aurukun (96 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 38.5 °C, humidity dropped to 14 % and gusts hit 50 km/h. The fire danger index (FWI) reached 75, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 14 September 2018 → 10 September 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 September 2018 to 14 October 2018. 989 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.