Skip to content
worldfires
CD · Democratic Republic of the Congo · →

Popokabaka fire, 5 August 2026 Popokabaka

Out · last detection 8 Sept 2026, 12:17 UTC

The fire started on 5 August 2026 in Popokabaka, Democratic Republic of the Congo, and satellites saw it burning for 35 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 24,784 hectares from heat detections, spread across a single municipality.

It is the 11th largest in Kwango since 2016 (of 220 with a page). Number 50 in Democratic Republic of the Congo in 2026, of 523.

Compare with…

Suggestions: Popokabaka · 2020Popokabaka · 2026

Burnt area
24,784ha
GWIS perimeter (Copernicus)
Duration
35days
5 Aug 2026 – 8 Sept 2026
Municipalities hit
1
territories
Started on
5 Aug
2026
Heat detections
583
in a single hotspot: 129 MW
Danger at start
20
Moderate · FWI index
Average daily power
202MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Aug8 Sept
8 Sept 2026

How it evolved, day by day

5 Aug 2026 · 17 MW · 4 6 Aug 2026 · 47 MW · 10 9 Aug 2026 · 14 MW · 2 10 Aug 2026 · 88 MW · 11 11 Aug 2026 · 242 MW · 14 12 Aug 2026 · 169 MW · 21 13 Aug 2026 · 231 MW · 18 14 Aug 2026 · 129 MW · 10 15 Aug 2026 · 187 MW · 19 16 Aug 2026 · 386 MW · 24 17 Aug 2026 · 624 MW · 61 19 Aug 2026 · 48 MW · 11 20 Aug 2026 · 573 MW · 51 21 Aug 2026 · 340 MW · 37 22 Aug 2026 · 27 MW · 6 23 Aug 2026 · 96 MW · 9 24 Aug 2026 · 952 MW · 79 25 Aug 2026 · 331 MW · 32 26 Aug 2026 · 63 MW · 11 27 Aug 2026 · 507 MW · 62 28 Aug 2026 · 25 MW · 1 29 Aug 2026 · 206 MW · 8 30 Aug 2026 · 189 MW · 9 1 Sept 2026 · 97 MW · 15 2 Sept 2026 · 80 MW · 7 3 Sept 2026 · 61 MW · 8 4 Sept 2026 · 334 MW · 12 5 Sept 2026 · 109 MW · 15 6 Sept 2026 · 7 MW · 2 7 Sept 2026 · 53 MW · 8 8 Sept 2026 · 27 MW · 6
5 Aug 12 Aug 17 Aug 23 Aug 24 Aug 28 Aug 3 Sept 8 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
34km/h · peak gust
37%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 5.2 mm on 11 Sept.

This area had burned before

83% of the perimeter overlaps earlier fires recorded since 2016: 3,576 ha in 2016, 8,832 ha in 2017, 9,335 ha in 2018, 7,069 ha in 2019, 10,605 ha in 2020, 4,037 ha in 2021, 9,112 ha in 2022, 10,901 ha in 2023, 10,213 ha in 2024, 11,080 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 20,487 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 16% of the area of London (248 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Popokabaka where it started
    24,970 ha reached on 5 Aug
    4.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area25 ha
Residents≈ 6,400

Inside the perimeter there were about 25 hectares of built-up land and about 6,400 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Aug 31.0 °C 45 % 19 km/h 0.0 mm Moderate 20
6 Aug 30.9 °C 45 % 21 km/h 0.0 mm High 22
7 Aug 28.6 °C 51 % 19 km/h 0.0 mm High 22
8 Aug 30.6 °C 48 % 19 km/h 0.0 mm High 22
9 Aug 29.4 °C 53 % 22 km/h 0.2 mm High 22
10 Aug 29.1 °C 52 % 26 km/h 0.0 mm High 23
11 Aug 29.0 °C 52 % 27 km/h 0.1 mm High 23
12 Aug 31.9 °C 42 % 25 km/h 0.0 mm High 23
13 Aug 31.8 °C 48 % 29 km/h 3.0 mm Low 7
14 Aug 30.3 °C 52 % 30 km/h 0.4 mm Moderate 13
15 Aug 29.5 °C 53 % 20 km/h 0.0 mm Moderate 17
16 Aug 29.4 °C 54 % 21 km/h 0.2 mm Moderate 17
17 Aug 30.9 °C 48 % 20 km/h 0.1 mm Moderate 18
18 Aug 31.5 °C 42 % 24 km/h 0.0 mm High 23
19 Aug 30.9 °C 40 % 22 km/h 0.0 mm High 23
20 Aug 32.1 °C 37 % 18 km/h 0.0 mm High 24
21 Aug 30.1 °C 47 % 23 km/h 0.0 mm High 23
22 Aug 32.0 °C 46 % 22 km/h 0.1 mm High 24
23 Aug 32.1 °C 53 % 25 km/h 0.3 mm High 21
24 Aug 29.4 °C 59 % 31 km/h 0.7 mm Moderate 16
25 Aug 31.6 °C 49 % 23 km/h 0.5 mm Moderate 19
26 Aug 32.9 °C 48 % 26 km/h 0.5 mm Moderate 21
27 Aug 35.4 °C 38 % 28 km/h 0.0 mm High 24
28 Aug 30.4 °C 53 % 34 km/h 1.7 mm Moderate 12
29 Aug 27.2 °C 64 % 24 km/h 0.5 mm Moderate 13
30 Aug 30.3 °C 54 % 25 km/h 0.7 mm Moderate 15
31 Aug 29.5 °C 56 % 26 km/h 0.1 mm Moderate 17
1 Sept 34.5 °C 40 % 22 km/h 1.3 mm Moderate 18
2 Sept 33.7 °C 47 % 21 km/h 5.8 mm Very low 4
3 Sept 29.0 °C 62 % 31 km/h 2.3 mm Very low 5
4 Sept 33.4 °C 40 % 26 km/h 0.2 mm Moderate 15
5 Sept 32.8 °C 48 % 20 km/h 0.4 mm Moderate 17
6 Sept 33.2 °C 46 % 20 km/h 1.9 mm Low 10
7 Sept 32.7 °C 51 % 25 km/h 4.0 mm Very low 3
8 Sept 32.2 °C 55 % 23 km/h 7.7 mm Very low 2
9 Sept after 30.9 °C 58 % 26 km/h 0.7 mm Very low 4
10 Sept after 30.4 °C 54 % 23 km/h 0.2 mm Low 9
11 Sept after 31.4 °C 52 % 25 km/h 5.2 mm Very low 2

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Jul 2026
After · 15 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 19 August 2026 the air beside the fire reached 360 µg/m³ of PM2.5. That day averaged 164: 11 times the WHO daily guideline (15).

PM2.5 peak360 µg/m³
Days over the guideline35 days
PM10372 µg/m³
Optical depth2.45
89101112131415161718192021222324252627282930311234567891011
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 583Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Democratic Republic of the Congo ›

Frequently asked questions

How long did the Popokabaka fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 5 August 2026 to 8 September 2026 (35 days). The perimeter dates it from 10 August 2026 to 1 September 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 24,784 hectares (247.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Popokabaka (24,970 ha, 4.0 %).
What was the weather like?
During the fire the temperature reached 35.4 °C, humidity dropped to 37 % and gusts hit 34 km/h. The fire danger index (FWI) reached 24, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Democratic Republic of the Congo (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 10 August 2026 → 5 August 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 10 August 2026 to 1 September 2026. 583 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.