Skip to content
worldfires
PK · Pakistan · –

Pindi Bhattian fire, 19 October 2026 Pindi Bhattian

Dying down · last detection 16 Nov 2026, 07:52 UTC

The fire started on 19 October 2026 in Pindi Bhattian, Pakistan, and satellites saw it burning for 29 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,620 hectares from heat detections, spread across a single municipality.

Number 4 in Pakistan in 2026, of 32.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Is it still active?

No detections since 16 Nov 2026, 07:52 UTC. That usually means no flame is visible from space any more, although hotspots may remain. Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.

Burnt area
4,620ha
GWIS perimeter (Copernicus)
Duration
29days
19 Oct 2026 – 16 Nov 2026
Municipalities hit
1
subdistricts
Started on
19 Oct
2026
Heat detections
125
in a single hotspot: 35 MW
Danger at start
14
Moderate · FWI index
Average daily power
36MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 Oct16 Nov
16 Nov 2026

How it evolved, day by day

19 Oct 2026 · 2 MW · 1 20 Oct 2026 · 0 MW · 0 22 Oct 2026 · 29 MW · 3 23 Oct 2026 · 4 MW · 2 25 Oct 2026 · 0 MW · 0 26 Oct 2026 · 27 MW · 6 27 Oct 2026 · 75 MW · 12 28 Oct 2026 · 18 MW · 5 29 Oct 2026 · 39 MW · 6 30 Oct 2026 · 66 MW · 8 31 Oct 2026 · 60 MW · 10 1 Nov 2026 · 25 MW · 5 2 Nov 2026 · 28 MW · 6 3 Nov 2026 · 59 MW · 9 4 Nov 2026 · 36 MW · 7 5 Nov 2026 · 100 MW · 9 6 Nov 2026 · 58 MW · 4 7 Nov 2026 · 80 MW · 9 8 Nov 2026 · 21 MW · 5 9 Nov 2026 · 44 MW · 11 10 Nov 2026 · 15 MW · 4 11 Nov 2026 · 0 MW · 0 13 Nov 2026 · 3 MW · 1 14 Nov 2026 · 4 MW · 1 15 Nov 2026 · 0 MW · 0 16 Nov 2026 · 3 MW · 1
19 Oct 27 Oct 5 Nov 15 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (61 passes) and with what wind. Watch the film

The weather it burned in

30°high
40km/h · peak gust
31%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started.

This area had burned before

24% of the perimeter overlaps earlier fires recorded since 2016: 298 ha in 2016, 230 ha in 2017, 11 ha in 2018, 58 ha in 2019, 29 ha in 2020, 283 ha in 2021, 246 ha in 2022, 155 ha in 2024, 674 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 1,110 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.9% of the area of London (46 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Pindi Bhattian where it started
    4,840 ha reached on 19 Oct
    4.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area43 ha
Residents≈ 13,000

Inside the perimeter there were about 43 hectares of built-up land and about 13,000 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
19 Oct 29.5 °C 44 % 18 km/h 0.0 mm Moderate 14
20 Oct 29.8 °C 46 % 16 km/h 0.0 mm Moderate 12
21 Oct 29.7 °C 51 % 19 km/h 0.0 mm Moderate 14
22 Oct 29.9 °C 53 % 18 km/h 0.0 mm Moderate 14
23 Oct 28.5 °C 54 % 31 km/h 1.8 mm Low 8
24 Oct 26.8 °C 58 % 40 km/h 4.8 mm Very low 3
25 Oct 27.1 °C 43 % 15 km/h 0.0 mm Very low 2
26 Oct 27.6 °C 41 % 17 km/h 0.0 mm Low 9
27 Oct 28.7 °C 41 % 14 km/h 0.0 mm Low 11
28 Oct 28.9 °C 34 % 17 km/h 0.0 mm Moderate 15
29 Oct 29.3 °C 31 % 18 km/h 0.0 mm Moderate 18
30 Oct 27.3 °C 48 % 16 km/h 0.0 mm Moderate 13
31 Oct 28.3 °C 40 % 18 km/h 0.0 mm Moderate 16
1 Nov 27.5 °C 48 % 16 km/h 0.0 mm Moderate 16
2 Nov 28.2 °C 46 % 15 km/h 0.0 mm Moderate 15
3 Nov 28.6 °C 41 % 19 km/h 0.0 mm Moderate 17
4 Nov 28.7 °C 39 % 12 km/h 0.0 mm Moderate 15
5 Nov 29.0 °C 40 % 16 km/h 0.0 mm Moderate 17
6 Nov 28.7 °C 38 % 18 km/h 0.0 mm Moderate 17
7 Nov 28.8 °C 35 % 16 km/h 0.0 mm Moderate 19
8 Nov 28.6 °C 43 % 16 km/h 0.0 mm Moderate 18
9 Nov 27.8 °C 45 % 15 km/h 0.0 mm Moderate 18
10 Nov 28.1 °C 45 % 17 km/h 0.0 mm High 22
11 Nov 27.3 °C 51 % 28 km/h 0.7 mm Moderate 16
12 Nov 27.9 °C 46 % 19 km/h 0.0 mm Moderate 18
13 Nov 27.9 °C 44 % 33 km/h 0.3 mm Moderate 21
14 Nov 26.9 °C 45 % 23 km/h 0.0 mm Moderate 18
15 Nov 26.5 °C 37 % 21 km/h 0.0 mm Moderate 19
16 Nov 26.1 °C 31 % 23 km/h 0.0 mm High 22
17 Nov after 25.7 °C 32 % 18 km/h 0.0 mm High 22

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 Oct 2026
After · 16 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 21 October 2026 the air beside the fire reached 186 µg/m³ of PM2.5. That day averaged 118: 7.8 times the WHO daily guideline (15).

PM2.5 peak186 µg/m³
Days over the guideline14 days
PM10213 µg/m³
Optical depth1.54
17 Oct20 Oct23 Oct26 Oct29 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 125Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Pakistan

Frequently asked questions

How long did the Pindi Bhattian fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 19 October 2026 to 16 November 2026 (29 days). The perimeter dates it from 26 October 2026 to 9 November 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,620 hectares (46.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Pindi Bhattian (4,840 ha, 4.1 %).
Is the Pindi Bhattian fire still active?
No fire detections since 16 Nov 2026, 07:52 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 29.9 °C, humidity dropped to 31 % and gusts hit 40 km/h. The fire danger index (FWI) reached 22, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Pakistan (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 1122 · 16 · Emergency number and official warnings

Satellite cross-check

History of this page · 7 Changes in area, dates, name, official record or merged pages, compared every night since 31 October 2026.
  1. Area: 4,494 → 4,620 ha.
  2. Area: 4,301 → 4,494 ha.
  3. Area: 4,164 → 4,301 ha.
  4. Area: 3,223 → 4,164 ha.
  5. Area: 2,950 → 3,223 ha.
  6. Area: 2,147 → 2,950 ha.
  7. Page published (2,147 ha).

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 1122 · 16.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 26 October 2026 to 9 November 2026. 125 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.