Skip to content
worldfires
CY · Cyprus ·

Pentalia fire, July 2021 Πενταλιά · Statos Agios Fotios, Pentalia, Faleia

Out · last detection 13 Jul 2021, 10:42 UTC

The fire started on 13 July 2021 in Pentalia, Cyprus, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 279 hectares from satellite imagery, spread across 3 municipalities.

It is the 7th largest in Paphos since 2016 (of 13 with a page). Number 4 in Cyprus in 2021, of 5.

Burnt area
279ha
Copernicus perimeter
Duration
1day
13 Jul 2021 – 13 Jul 2021
Municipalities hit
3
municipalities
Started on
13 Jul
2021
Heat detections
2
in a single hotspot: 144 MW
Danger at start
31
High · FWI index
Average daily power
226MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Jul13 Jul

How it evolved, day by day

13 Jul 2021 · 226 MW · 2

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

29°high
32km/h · peak gust
50%lowest humidity

It had gone 21 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

  1. Statos Agios Fotios Στατός-Άγιος Φώτιος 243 inhabitants · 2.3 km from the centre
    133 ha
    8.1 %
  2. Pentalia Πενταλιά 63 inhabitants · 0.8 km from the centre where it started
    126 ha reached on 13 Jul
    9.0 %
  3. 20 ha
    4.8 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Agricultural areas67 %
  • Other natural land23 %
  • Sclerophyllous scrub9.4 %

Natura 2000 protected area affected: 51 %

Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

Official record

According to Τμήμα Δασών, this fire started on 13 July 2021 and burned 272 ha (the satellite measured 279 ha).

Τμήμα Δασών (Departamento de Bosques de Chipre), catálogo de incendios forestales. This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Jul 28.6 °C 50 % 32 km/h 0.0 mm High 31
14 Jul after 29.5 °C 52 % 28 km/h 0.0 mm High 24
15 Jul after 31.4 °C 39 % 27 km/h 0.0 mm High 34
16 Jul after 31.2 °C 40 % 28 km/h 0.0 mm High 34
17 Jul after 29.6 °C 51 % 31 km/h 0.0 mm High 34
18 Jul after 29.0 °C 53 % 27 km/h 0.0 mm High 25
19 Jul after 28.3 °C 54 % 31 km/h 0.0 mm High 30
20 Jul after 26.4 °C 63 % 37 km/h 0.0 mm High 34
21 Jul after 26.4 °C 68 % 38 km/h 0.0 mm High 30
22 Jul after 27.6 °C 65 % 33 km/h 0.0 mm High 26
23 Jul after 28.3 °C 60 % 31 km/h 0.0 mm Moderate 20

Its twins: fires that started in the same weather

It started with an FWI of 30.8, a minimum humidity of 50% and 21 days without rain. Fires in the area that started in weather like this since 2016: 16.

FWI at the start 30.8
Minimum humidity 50 %
Days without rain 21
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Kato Polemidia fire, May 2024
444 ha 2 days FWI 32.8 Min. humidity 46 % 37 km away, in 2024

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
159 ha
median area
6 %
went past 1,000 ha
1.7 mm
rain at the end (median; 7 of 16 had it)

It was 1.8 times larger than the median of its twins and lasted 1 day, against 2 days.

Only 5 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
32km/h · max. gust

It was considered over on 13 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 7 of 16, with a median of 1.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Jul 2021
After · 20 Jul 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 2Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Cyprus

Frequently asked questions

How long did the Pentalia fire last?
Copernicus dates it between 13 July 2021 and 13 July 2021: 1 day between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 279 hectares (2.8 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Statos Agios Fotios (133 ha, 8.1 %); Pentalia (126 ha, 9.0 %); Faleia (20 ha, 4.8 %).
Did the fire reach a town?
The fire started in Pentalia and came within 0.8 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 28.6 °C, humidity dropped to 50 % and gusts hit 32 km/h. The fire danger index (FWI) reached 31, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Cyprus (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 16. Their median duration was 2 days and their median area 159 ha; 6 % went past 1,000 ha. Only 5 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 1407 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 1407.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 2 Suomi-NPP VIIRS detections on those dates.
  • Compared with Τμήμα Δασών: 272 official ha against 279 ha of perimeter; they agree within 25%.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution-ShareAlike 3.0 Unported). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.