Skip to content
worldfires
VE · Venezuela · –

Pedro Camejo fire, 9 February 2026 Pedro Camejo, San Fernando

Out · last detection 17 Mar 2026, 18:42 UTC

The fire started on 9 February 2026 in Pedro Camejo, Venezuela, and satellites saw it burning for 37 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,241 hectares from heat detections, spread across 2 municipalities.

Number 20 in Venezuela in 2026, of 411.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
8,241ha
GWIS perimeter (Copernicus)
Duration
37days
9 Feb 2026 – 17 Mar 2026
Municipalities hit
2
municipalities
Started on
9 Feb
2026
Heat detections
394
in a single hotspot: 72 MW
Danger at start
43
Very high · FWI index
Average daily power
133MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Feb17 Mar
17 Mar 2026

How it evolved, day by day

9 Feb 2026 · 66 MW · 8 11 Feb 2026 · 70 MW · 8 12 Feb 2026 · 20 MW · 5 13 Feb 2026 · 19 MW · 3 14 Feb 2026 · 82 MW · 7 15 Feb 2026 · 3 MW · 1 16 Feb 2026 · 10 MW · 1 17 Feb 2026 · 8 MW · 1 18 Feb 2026 · 163 MW · 19 19 Feb 2026 · 119 MW · 15 20 Feb 2026 · 57 MW · 5 21 Feb 2026 · 377 MW · 40 22 Feb 2026 · 140 MW · 17 23 Feb 2026 · 42 MW · 11 24 Feb 2026 · 170 MW · 17 25 Feb 2026 · 166 MW · 9 26 Feb 2026 · 249 MW · 24 27 Feb 2026 · 79 MW · 13 28 Feb 2026 · 454 MW · 33 1 Mar 2026 · 341 MW · 41 2 Mar 2026 · 141 MW · 15 3 Mar 2026 · 543 MW · 31 4 Mar 2026 · 122 MW · 10 5 Mar 2026 · 82 MW · 10 7 Mar 2026 · 94 MW · 15 8 Mar 2026 · 27 MW · 4 9 Mar 2026 · 132 MW · 15 13 Mar 2026 · 27 MW · 2 14 Mar 2026 · 15 MW · 2 17 Mar 2026 · 176 MW · 12
9 Feb 16 Feb 22 Feb 3 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (45 passes) and with what wind. Watch the film

The weather it burned in

38°high
52km/h · peak gust
19%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started.

This area had burned before

95% of the perimeter overlaps earlier fires recorded since 2016: 2,913 ha in 2016, 1,799 ha in 2017, 1,172 ha in 2018, 6,394 ha in 2019, 7,046 ha in 2020, 1,047 ha in 2021, 5,135 ha in 2022, 5,342 ha in 2023, 3,812 ha in 2024, 4,929 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 7,821 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5.2% of the area of London (82 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Pedro Camejo where it started
    8,912 ha reached on 9 Feb
    0.4 %
  2. San Fernando 165,135 inhabitants
    0 ha reached on 11 Feb
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Feb 37.8 °C 19 % 42 km/h 0.0 mm Very high 43
10 Feb 38.1 °C 23 % 46 km/h 0.0 mm Very high 50
11 Feb 37.2 °C 27 % 46 km/h 0.0 mm Extreme 53
12 Feb 37.9 °C 23 % 42 km/h 0.0 mm Very high 45
13 Feb 38.2 °C 32 % 42 km/h 0.0 mm Very high 42
14 Feb 37.2 °C 36 % 40 km/h 0.2 mm High 38
15 Feb 37.2 °C 25 % 36 km/h 0.3 mm Very high 44
16 Feb 38.2 °C 25 % 41 km/h 0.0 mm Very high 45
17 Feb 37.4 °C 22 % 42 km/h 0.1 mm Very high 42
18 Feb 37.4 °C 25 % 33 km/h 0.0 mm Very high 39
19 Feb 37.9 °C 26 % 40 km/h 0.1 mm Very high 44
20 Feb 37.3 °C 28 % 40 km/h 0.0 mm Very high 47
21 Feb 37.4 °C 26 % 48 km/h 0.0 mm Extreme 52
22 Feb 37.0 °C 27 % 47 km/h 0.0 mm Extreme 52
23 Feb 36.9 °C 28 % 49 km/h 0.0 mm Very high 49
24 Feb 36.9 °C 29 % 44 km/h 0.0 mm Very high 49
25 Feb 37.1 °C 26 % 48 km/h 0.0 mm Extreme 53
26 Feb 37.1 °C 29 % 45 km/h 0.0 mm Very high 48
27 Feb 36.7 °C 25 % 47 km/h 0.0 mm Extreme 51
28 Feb 37.2 °C 25 % 46 km/h 0.0 mm Very high 47
1 Mar 37.7 °C 24 % 45 km/h 0.0 mm Very high 48
2 Mar 37.7 °C 26 % 47 km/h 0.0 mm Extreme 51
3 Mar 37.0 °C 29 % 48 km/h 0.0 mm Extreme 54
4 Mar 36.8 °C 26 % 47 km/h 0.0 mm Extreme 55
5 Mar 36.6 °C 24 % 45 km/h 0.0 mm Extreme 51
6 Mar 37.0 °C 23 % 45 km/h 0.0 mm Extreme 53
7 Mar 36.5 °C 33 % 51 km/h 0.0 mm Extreme 53
8 Mar 37.5 °C 25 % 46 km/h 0.0 mm Extreme 52
9 Mar 37.6 °C 26 % 45 km/h 0.0 mm Extreme 52
10 Mar 36.9 °C 30 % 49 km/h 0.0 mm Extreme 56
11 Mar 34.8 °C 35 % 42 km/h 0.0 mm Very high 47
12 Mar 36.7 °C 33 % 39 km/h 0.0 mm Very high 46
13 Mar 37.9 °C 32 % 45 km/h 0.0 mm Very high 48
14 Mar 37.5 °C 32 % 44 km/h 0.0 mm Very high 50
15 Mar 36.7 °C 35 % 52 km/h 0.0 mm Extreme 53
16 Mar 36.7 °C 37 % 50 km/h 0.0 mm Very high 50
17 Mar 34.6 °C 36 % 52 km/h 0.0 mm Extreme 53
18 Mar after 37.0 °C 25 % 46 km/h 0.0 mm Extreme 52
19 Mar after 36.9 °C 29 % 45 km/h 0.0 mm Very high 49
20 Mar after 38.3 °C 27 % 44 km/h 0.0 mm Very high 49
21 Mar after 38.8 °C 23 % 42 km/h 0.0 mm Extreme 52
22 Mar after 39.8 °C 20 % 43 km/h 0.0 mm Extreme 60
23 Mar after 38.9 °C 24 % 45 km/h 0.0 mm Extreme 58
24 Mar after 38.9 °C 21 % 48 km/h 0.0 mm Extreme 62
25 Mar after 38.5 °C 27 % 46 km/h 0.0 mm Extreme 59
26 Mar after 37.5 °C 32 % 48 km/h 0.0 mm Extreme 59
27 Mar after 38.0 °C 32 % 48 km/h 0.0 mm Very high 49

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Feb 2026
After · 24 Mar 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 23 February 2026 the air beside the fire reached 45 µg/m³ of PM2.5. That day averaged 26: 1.7 times the WHO daily guideline (15).

PM2.5 peak45 µg/m³
Days over the guideline3 days
PM1068 µg/m³
Optical depth0.44
7 Feb16 Feb25 Feb6 Mar15 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 394Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Venezuela

Frequently asked questions

How long did the Pedro Camejo fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 9 February 2026 to 17 March 2026 (37 days). The perimeter dates it from 16 February 2026 to 10 March 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,241 hectares (82.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Pedro Camejo (8,912 ha, 0.4 %); San Fernando (0 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 38.2 °C, humidity dropped to 19 % and gusts hit 52 km/h. The fire danger index (FWI) reached 56, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Venezuela (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 3 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 8,846 → 8,241 ha.
  2. Last day with fire: 10 March 2026 → 17 March 2026.
  3. Start date: 16 February 2026 → 9 February 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 February 2026 to 10 March 2026. 394 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.