Skip to content
worldfires
VE · Venezuela · –

Pedro Camejo fire, 15 January 2025 Pedro Camejo

Out · last detection 18 Jan 2025, 17:27 UTC

The fire started on 15 January 2025 in Pedro Camejo, Venezuela, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,926 hectares from heat detections, spread across a single municipality.

It is the 458th largest in Apure since 2016 (of 761 with a page). Number 66 in Venezuela in 2025, of 119.

Burnt area
1,926ha
GWIS perimeter (Copernicus)
Duration
4days
15 Jan 2025 – 18 Jan 2025
Municipalities hit
1
municipalities
Started on
15 Jan
2025
Heat detections
46
in a single hotspot: 54 MW
Danger at start
44
Very high · FWI index
Average daily power
322MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Jan18 Jan
18 Jan 2025

How it evolved, day by day

15 Jan 2025 · 338 MW · 30 18 Jan 2025 · 305 MW · 16
15 Jan 18 Jan

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
42km/h · peak gust
27%lowest humidity

It had gone 9 days without rain (1 mm or more) when it started.

This area had burned before

51% of the perimeter overlaps earlier fires recorded since 2016: 977 ha in 2020, 2 ha in 2022.

How big is it?

10 km
It burned the equivalent of 1.2% of the area of London (19 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Pedro Camejo where it started
    1,937 ha reached on 15 Jan
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Jan 35.2 °C 30 % 40 km/h 0.0 mm Very high 44
16 Jan 35.9 °C 27 % 38 km/h 0.0 mm Very high 42
17 Jan 35.7 °C 30 % 39 km/h 0.0 mm Very high 44
18 Jan 36.9 °C 29 % 42 km/h 0.0 mm Very high 44
19 Jan after 36.1 °C 33 % 41 km/h 0.0 mm Very high 48
20 Jan after 36.6 °C 30 % 44 km/h 0.0 mm Very high 49
21 Jan after 35.5 °C 27 % 50 km/h 0.0 mm Extreme 54
22 Jan after 36.0 °C 32 % 46 km/h 0.0 mm Very high 48
23 Jan after 35.7 °C 38 % 42 km/h 0.0 mm Very high 43
24 Jan after 33.9 °C 47 % 33 km/h 0.3 mm High 31
25 Jan after 32.1 °C 52 % 34 km/h 0.3 mm High 22
26 Jan after 35.7 °C 33 % 29 km/h 0.0 mm High 36
27 Jan after 36.6 °C 38 % 35 km/h 0.0 mm Very high 40
28 Jan after 37.3 °C 29 % 34 km/h 0.0 mm High 36

Its twins: fires that started in the same weather

It started with an FWI of 43.9, a minimum humidity of 30% and 9 days without rain. Fires in the area that started in weather like this since 2016: 38.

FWI at the start 43.9
Minimum humidity 30 %
Days without rain 9
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Puerto Carreño fire, March 2023
1,821 ha 2 days FWI 44.0 Min. humidity 29 % 88 km away, in 2023

First rain (1 mm or more) after it ended: 4.0 mm on 1 Apr.

What happened to them

6 days
median duration
2,396 ha
median area
100 %
went past 1,000 ha
3.0 mm
rain at the end (median; 22 of 38 had it)

It burned an area similar to its twins (1,926 ha against a median of 2,396 ha) and lasted 4 days, against 6 days.

In 16 of 38, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
42km/h · max. gust

It was considered over on 18 Jan, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 22 of 38, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Jan 2025
After · 25 Jan 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 16 January 2025 the air beside the fire reached 16 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak16 µg/m³
Days over the guideline0 days
PM1017 µg/m³
Optical depth0.21
13 Jan15 Jan17 Jan19 Jan21 Jan
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 46Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Venezuela

Frequently asked questions

How long did the Pedro Camejo fire last?
GWIS (Copernicus) dates it between 15 January 2025 and 18 January 2025: 4 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,926 hectares (19.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Pedro Camejo (1,937 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 36.9 °C, humidity dropped to 27 % and gusts hit 42 km/h. The fire danger index (FWI) reached 44, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Venezuela (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 38. Their median duration was 6 days and their median area 2,396 ha; 100 % went past 1,000 ha. In 16 of 38, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 46 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.