Skip to content
worldfires
KH · Cambodia · →

Pech Chreada fire, 3 February 2026 Pech Chreada, Kaev Seima

Out · last detection 21 Feb 2026, 06:03 UTC

The fire started on 3 February 2026 in Pech Chreada, Cambodia, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,602 hectares from heat detections, spread across 2 municipalities.

It is the 71th largest in Mondulkiri since 2016 (of 112 with a page). Number 71 in Cambodia in 2026, of 118.

The power measured by the satellite is low (9.8 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Compare with…
Burnt area
2,602ha
GWIS perimeter (Copernicus)
Duration
19days
3 Feb 2026 – 21 Feb 2026
Municipalities hit
2
districts
Started on
3 Feb
2026
Heat detections
44
in a single hotspot: 10 MW
Danger at start
21
Moderate · FWI index
Average daily power
26MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Feb21 Feb
21 Feb 2026

How it evolved, day by day

4 Feb 2026 · 8 MW · 2 8 Feb 2026 · 16 MW · 2 9 Feb 2026 · 81 MW · 16 10 Feb 2026 · 72 MW · 16 12 Feb 2026 · 7 MW · 2 15 Feb 2026 · 16 MW · 4 16 Feb 2026 · 1 MW · 1 21 Feb 2026 · 4 MW · 1
4 Feb 9 Feb 12 Feb 16 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
62km/h · peak gust
31%lowest humidity

It had gone 43 days without rain (1 mm or more) when it started. Rain came after the fire: 6.8 mm on 26 Feb.

This area had burned before

12% of the perimeter overlaps earlier fires recorded since 2016: 321 ha in 2024.

How big is it?

10 km
It burned the equivalent of 1.6% of the area of London (26 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Pech Chreada where it started
    2,590 ha reached on 4 Feb
    0.7 %
  2. 28 ha reached on 15 Feb
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Feb 31.2 °C 50 % 34 km/h 0.6 mm Moderate 21
8 Feb 32.4 °C 36 % 53 km/h 0.0 mm High 33
9 Feb 32.6 °C 38 % 62 km/h 0.0 mm High 36
10 Feb 33.5 °C 39 % 43 km/h 0.0 mm High 30
11 Feb 27.7 °C 65 % 38 km/h 0.8 mm Moderate 16
12 Feb 33.1 °C 40 % 40 km/h 0.0 mm High 26
13 Feb 34.1 °C 31 % 37 km/h 0.0 mm High 33
14 Feb 34.5 °C 31 % 37 km/h 0.0 mm High 33
15 Feb 33.9 °C 42 % 33 km/h 0.0 mm High 31
16 Feb 35.2 °C 37 % 40 km/h 0.0 mm High 34
17 Feb 34.1 °C 39 % 44 km/h 0.0 mm High 35
18 Feb 33.7 °C 41 % 54 km/h 0.0 mm Very high 40
19 Feb 33.3 °C 38 % 56 km/h 0.0 mm Very high 40
20 Feb 34.1 °C 33 % 53 km/h 0.0 mm Very high 40
21 Feb 34.2 °C 34 % 36 km/h 0.0 mm High 34
22 Feb after 33.0 °C 40 % 22 km/h 0.0 mm High 28
23 Feb after 32.7 °C 45 % 19 km/h 0.0 mm High 26
24 Feb after 33.6 °C 41 % 23 km/h 0.0 mm High 24
25 Feb after 33.0 °C 34 % 24 km/h 0.0 mm High 26
26 Feb after 33.1 °C 51 % 29 km/h 6.8 mm Very low 4

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 Jan 2026
After · 28 Feb 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 6 February 2026 the air beside the fire reached 42 µg/m³ of PM2.5. That day averaged 34: 2.3 times the WHO daily guideline (15).

PM2.5 peak42 µg/m³
Days over the guideline3 days
PM1043 µg/m³
Optical depth1.26
5678910111213141516171819
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 44Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Cambodia ›

Frequently asked questions

How long did the Pech Chreada fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 3 February 2026 to 21 February 2026 (19 days). The perimeter dates it from 7 February 2026 to 16 February 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,602 hectares (26.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Pech Chreada (2,590 ha, 0.7 %); Kaev Seima (28 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 35.2 °C, humidity dropped to 31 % and gusts hit 62 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Cambodia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 7 February 2026 to 16 February 2026. 44 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.