Skip to content
worldfires
AR · Argentina · –

Patiño fire, 22 September 2020 Patiño

Out · last detection 10 Oct 2020, 18:26 UTC

The fire started on 22 September 2020 in Patiño, Argentina, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,107 hectares from heat detections, spread across a single municipality.

It is the 23th largest in Formosa since 2016 (of 587 with a page). Number 38 in Argentina in 2020, of 669.

Burnt area
9,107ha
GWIS perimeter (Copernicus)
Duration
19days
22 Sept 2020 – 10 Oct 2020
Municipalities hit
1
departments
Started on
22 Sept
2020
Heat detections
566
in a single hotspot: 81 MW
Danger at start
15
Moderate · FWI index
Average daily power
358MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Sept10 Oct
10 Oct 2020

How it evolved, day by day

22 Sept 2020 · 67 MW · 9 23 Sept 2020 · 63 MW · 8 24 Sept 2020 · 40 MW · 4 25 Sept 2020 · 387 MW · 38 26 Sept 2020 · 832 MW · 61 27 Sept 2020 · 19 MW · 13 28 Sept 2020 · 11 MW · 3 29 Sept 2020 · 180 MW · 17 30 Sept 2020 · 408 MW · 52 1 Oct 2020 · 3,059 MW · 187 2 Oct 2020 · 517 MW · 139 3 Oct 2020 · 6 MW · 4 6 Oct 2020 · 4 MW · 2 7 Oct 2020 · 42 MW · 13 8 Oct 2020 · 20 MW · 5 10 Oct 2020 · 71 MW · 11
22 Sept 26 Sept 1 Oct 6 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

42°high
74km/h · peak gust
13%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 1.2 mm on 13 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 5.8% of the area of London (91 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Patiño where it started
    8,543 ha reached on 22 Sept
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.11 ha
Residents< 20

Inside the perimeter there were about 0.11 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Sept 29.4 °C 25 % 26 km/h 0.0 mm Moderate 15
23 Sept 32.9 °C 37 % 33 km/h 0.0 mm High 22
24 Sept 36.5 °C 35 % 41 km/h 0.0 mm High 29
25 Sept 39.2 °C 25 % 63 km/h 0.0 mm Extreme 54
26 Sept 40.7 °C 24 % 69 km/h 0.0 mm Extreme 60
27 Sept 33.3 °C 39 % 54 km/h 0.1 mm High 34
28 Sept 27.6 °C 22 % 33 km/h 0.0 mm High 23
29 Sept 36.6 °C 31 % 49 km/h 0.0 mm High 26
30 Sept 41.0 °C 22 % 74 km/h 0.0 mm Very extreme 74
1 Oct 42.1 °C 18 % 73 km/h 0.0 mm Very extreme 89
2 Oct 36.3 °C 34 % 45 km/h 0.0 mm High 30
3 Oct 26.5 °C 46 % 49 km/h 0.0 mm High 36
4 Oct 25.6 °C 47 % 36 km/h 0.0 mm Moderate 18
5 Oct 25.8 °C 38 % 38 km/h 0.0 mm High 25
6 Oct 30.7 °C 36 % 29 km/h 0.0 mm High 22
7 Oct 37.8 °C 32 % 40 km/h 0.0 mm High 31
8 Oct 38.0 °C 30 % 40 km/h 0.0 mm High 30
9 Oct 32.7 °C 25 % 51 km/h 0.0 mm Very high 46
10 Oct 34.6 °C 13 % 42 km/h 0.0 mm Extreme 57
11 Oct after 36.5 °C 20 % 32 km/h 0.0 mm Very high 48
12 Oct after 36.7 °C 26 % 41 km/h 0.0 mm Very high 45
13 Oct after 34.3 °C 33 % 40 km/h 1.2 mm High 34

Its twins: fires that started in the same weather

It started with an FWI of 14.8, a minimum humidity of 25% and 5 days without rain. Fires in the area that started in weather like this since 2016: 24.

FWI at the start 14.8
Minimum humidity 25 %
Days without rain 5
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Patiño fire, July 2021
14,634 ha 20 days FWI 14.5 Min. humidity 25 % 112 km away, in 2021

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

7 days
median duration
2,068 ha
median area
100 %
went past 1,000 ha
4.8 mm
rain at the end (median; 21 of 24 had it)

It was 4.4 times larger than the median of its twins and lasted 19 days, against 7 days.

Only 2 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 3 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.2 mmfirst rain
13 Oct3 days after it ended
74km/h · max. gust

It was considered over on 10 Oct, and on 13 Oct 1.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 21 of 24, with a median of 4.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Sept 2020
After · 17 Oct 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 566Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Argentina

Frequently asked questions

How long did the Patiño fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 22 September 2020 to 10 October 2020 (19 days). The perimeter dates it from 22 September 2020 to 3 October 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,107 hectares (91.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Patiño (8,543 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 42.1 °C, humidity dropped to 13 % and gusts hit 74 km/h. The fire danger index (FWI) reached 89, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Argentina (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 24. Their median duration was 7 days and their median area 2,068 ha; 100 % went past 1,000 ha. Only 2 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 3 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · 100 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 9,586 → 9,107 ha.
  2. Last day with fire: 3 October 2020 → 10 October 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911 · 100.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 22 September 2020 to 3 October 2020. 566 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.