Skip to content
worldfires
SS · South Sudan · –

Panyikang fire, November 2024 Panyikang

Out · last detection 6 Dec 2024, 10:47 UTC

The fire started on 27 November 2024 in Panyikang, South Sudan, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,848 hectares from heat detections, spread across a single municipality.

It is the 170th largest in Upper Nile since 2016 (of 238 with a page). Number 127 in South Sudan in 2024, of 180.

Burnt area
5,848ha
GWIS perimeter (Copernicus)
Duration
10days
27 Nov 2024 – 6 Dec 2024
Municipalities hit
1
counties
Started on
27 Nov
2024
Heat detections
130
in a single hotspot: 64 MW
Danger at start
70
Extreme · FWI index
Average daily power
223MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 27 Nov6 Dec
6 Dec 2024

How it evolved, day by day

27 Nov 2024 · 26 MW · 9 28 Nov 2024 · 49 MW · 8 29 Nov 2024 · 142 MW · 16 30 Nov 2024 · 412 MW · 28 1 Dec 2024 · 382 MW · 23 2 Dec 2024 · 471 MW · 36 3 Dec 2024 · 213 MW · 8 6 Dec 2024 · 92 MW · 2
27 Nov 29 Nov 2 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
42km/h · peak gust
14%lowest humidity

It had gone 31 days without rain (1 mm or more) when it started.

This area had burned before

99% of the perimeter overlaps earlier fires recorded since 2016: 2,622 ha in 2016, 4,622 ha in 2017, 97 ha in 2018, 3,374 ha in 2019, 1,395 ha in 2020, 1,644 ha in 2021, 1,393 ha in 2022, 2,043 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 5,798 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.7% of the area of London (58 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Panyikang where it started
    5,887 ha reached on 27 Nov
    1.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
27 Nov 34.5 °C 17 % 41 km/h 0.0 mm Extreme 70
28 Nov 33.7 °C 14 % 39 km/h 0.0 mm Extreme 62
29 Nov 34.8 °C 17 % 35 km/h 0.0 mm Extreme 65
30 Nov 35.2 °C 19 % 38 km/h 0.0 mm Very extreme 70
1 Dec 35.1 °C 16 % 41 km/h 0.0 mm Very extreme 74
2 Dec 35.6 °C 14 % 36 km/h 0.0 mm Extreme 68
3 Dec 36.1 °C 16 % 36 km/h 0.0 mm Extreme 70
4 Dec 36.2 °C 16 % 42 km/h 0.0 mm Very extreme 77
5 Dec 36.0 °C 19 % 39 km/h 0.0 mm Extreme 70
6 Dec 36.6 °C 20 % 40 km/h 0.0 mm Very extreme 73
7 Dec after 38.0 °C 17 % 39 km/h 0.0 mm Very extreme 71
8 Dec after 38.8 °C 14 % 38 km/h 0.0 mm Very extreme 72
9 Dec after 37.7 °C 15 % 34 km/h 0.0 mm Very high 49
10 Dec after 38.1 °C 17 % 41 km/h 0.0 mm Very extreme 75
11 Dec after 37.9 °C 18 % 40 km/h 0.0 mm Very extreme 74
12 Dec after 37.5 °C 20 % 31 km/h 0.0 mm Extreme 60
13 Dec after 38.0 °C 19 % 32 km/h 0.0 mm Extreme 62
14 Dec after 36.8 °C 18 % 44 km/h 0.0 mm Very extreme 77
15 Dec after 36.6 °C 20 % 45 km/h 0.0 mm Very extreme 76
16 Dec after 37.2 °C 21 % 42 km/h 0.0 mm Very extreme 74

Its twins: fires that started in the same weather

It started with an FWI of 69.9, a minimum humidity of 17% and 31 days without rain. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 69.9
Minimum humidity 17 %
Days without rain 31
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Panyikang fire, December 2017
16,784 ha 29 days FWI 68.8 Min. humidity 18 % 10 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

8 days
median duration
5,589 ha
median area
5 %
went past 10,000 ha
—
rain at the end (median; 0 of 21 had it)

It burned an area similar to its twins (5,848 ha against a median of 5,589 ha) and lasted 10 days, against 8 days.

In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
42km/h · max. gust

It was considered over on 6 Dec, and not even 1 mm fell in the following ten days: it went out without rain. None of its 21 twins had rain when they ended.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 20 Nov 2024
After · 13 Dec 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 6 December 2024 the air beside the fire reached 41 µg/m³ of PM2.5. That day averaged 28: 1.9 times the WHO daily guideline (15).

PM2.5 peak41 µg/m³
Days over the guideline9 days
PM1094 µg/m³
Optical depth0.33
25 Nov28 Nov1 Dec4 Dec
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 130Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in South Sudan

Frequently asked questions

How long did the Panyikang fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 27 November 2024 to 6 December 2024 (10 days). The perimeter dates it from 27 November 2024 to 3 December 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,848 hectares (58.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Panyikang (5,887 ha, 1.2 %).
What was the weather like?
During the fire the temperature reached 36.6 °C, humidity dropped to 14 % and gusts hit 42 km/h. The fire danger index (FWI) reached 77, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of South Sudan (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 8 days and their median area 5,589 ha; 5 % went past 10,000 ha. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 3 December 2024 → 6 December 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 27 November 2024 to 3 December 2024. 130 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.