Pano Archimandrita fire, August 2020
Πάνω Αρχιμανδρίτα · Pano Archimandrita, Fasoula Pafou
Out · last detection 8 Aug 2020, 11:38 UTC
The fire started on 7 August 2020 in Pano Archimandrita, Cyprus, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 370 hectares from satellite imagery, spread across 2 municipalities.
It is the 5th largest in Paphos since 2016 (of 13 with a page). Number 2 in Cyprus in 2020, of 8.
matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Burned area
matches the official record
370ha
Perimeter published by EFFIS (Copernicus).
This page370Τμήμα Δασών340
Source
EFFIS (Copernicus)
Date
perimeter revised on 26 January 2022
+− cross-check
Τμήμα Δασών: 340 ha (matched records: 2). Difference between the page and the official record: +8.8%. Matched on 15 November 2026.
Duration by satellite
satellite only
2days
7 Aug 2020 to 8 Aug 2020: first and last day with fire on the page.
Source
EFFIS (Copernicus) · NASA FIRMS · VIIRS
Date
last detection: 8 Aug 2020, 11:38 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start and cause
matches the official record
8 Aug 2020
Alert according to Τμήμα Δασών: 8 August 2020. Official cause: arson.
Source
Τμήμα Δασών · bc0f1f7c2cce562a, 7b84bdc04ea35b6e
Date
matched to the page on 15 November 2026
+− cross-check
First day with fire on the page (satellite or perimeter): 7 August 2020.
Hotspots
satellite only
48
VIIRS detections at 375 m. Most intense hotspot: 68 MW.
Source
NASA FIRMS · VIIRS (Suomi NPP)
Date
7 Aug 2020 – 8 Aug 2020
+− cross-check
There is no official record to compare with. Each hotspot is a pixel detected in one satellite pass, not a separate fire.
The worst day
satellite only
1,309MW
Total radiative power on 8 August 2020; hotspots that day: 48.
Source
NASA FIRMS · VIIRS (FRP)
Date
8 Aug 2020
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model
23.4FWI · high
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 60.
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings ›
Weather during the fire
model
31.2°C · 52% RH
High of 31.2 °C and minimum humidity of 52% on 7 August 2020; gusts of 48 km/h on 8 August 2020.
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
ⓘThis page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
· reconstructedofficial
Matched with the official Τμήμα Δασών record
Matches: 340 ha in the official record (records: 2).
A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.
Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.
Official record
Several official records match this area
According to Τμήμα Δασών, 2 fires started inside this perimeter on these dates, totalling 340 ha (the satellite measured 370 ha).
Τμήμα Δασών records each fire that started at a different time or place separately; the satellite sees a single burned area, so this page groups them together. The numbers on the map show where each one started.
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Day
High
Min. humidity
Peak gust
Rain
Danger (FWI)
7 Aug
31.2 °C
52 %
32 km/h
0.0 mm
High 23
8 Aug
26.6 °C
67 %
48 km/h
0.0 mm
High 33
9 Aug after
26.2 °C
64 %
48 km/h
0.0 mm
High 36
10 Aug after
26.5 °C
68 %
44 km/h
0.0 mm
High 30
11 Aug after
27.0 °C
69 %
34 km/h
0.0 mm
High 25
12 Aug after
29.1 °C
56 %
34 km/h
0.0 mm
High 24
13 Aug after
31.3 °C
47 %
35 km/h
0.0 mm
High 31
14 Aug after
32.3 °C
39 %
36 km/h
0.0 mm
High 32
15 Aug after
32.3 °C
31 %
34 km/h
0.0 mm
Very high 38
16 Aug after
30.3 °C
45 %
38 km/h
0.0 mm
Very high 40
17 Aug after
30.2 °C
39 %
35 km/h
0.0 mm
Very high 38
18 Aug after
29.7 °C
49 %
35 km/h
0.0 mm
High 36
Its twins: fires that started in the same weather
It started with an FWI of 23.4, a minimum humidity of 52% and more than two months without rain. Fires in the area that started in weather like this since 2016: 8.
FWI at the start23.4
Minimum humidity52 %
Days without rain60+
this firechosen twinsrest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Pano Archimandrita fire, August 2020
370 ha2 daysFWI 23.4Min. humidity 52 %
Pelendri fire, August 2023
104 ha1 dayFWI 27.9Min. humidity 51 %33 km away, in 2023
First rain (1 mm or more) after it ended: none in the following ten days.
Fires in the area that started in similar weather: 8. With fewer than 15 we give no figures: they would be more noise than signal.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
—first rain
—no rain in ten days
48km/h · max. gust
It was considered over on 8 Aug, and not even 1 mm fell in the following ten days: it went out without rain.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
Same area: fires that have already ended, less than 250 km from this one, since 2016.
Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
They are sorted by similarity, and the outlines of the first five are drawn.
Drag the line to compare the same ground before the fire and after it.
↔
Before · 31 Jul 2020
After · 15 Aug 2020
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · Copernicus
On 11 August 2020 the air beside the fire reached 16 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).
PM2.5 peak16µg/m³
Days over the guideline0days
PM1035µg/m³
WHO 15
5 Aug7 Aug9 Aug11 Aug
GoodFairModeratePoorVery poorExtremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table· 48Every satellite heat detection, one by one, with time, satellite, power and coordinates.›
⬇ Download CSVTimes in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Copernicus dates it between 7 August 2020 and 8 August 2020: 2 days between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 370 hectares (3.7 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Pano Archimandrita (371 ha, 20 %); Fasoula Pafou (0 ha, 0.0 %).
Did the fire reach a town?
The fire started in Pano Archimandrita and came within 1.5 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 31.2 °C, humidity dropped to 52 % and gusts hit 48 km/h. The fire danger index (FWI) reached 33, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Cyprus (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
⚑Report an errorHow we know this›
Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
Dates from the perimeter: the VIIRS detections inside it did not change them. 48 Suomi-NPP VIIRS detections on those dates.
Compared with Τμήμα Δασών: 340 official ha against 370 ha of perimeter; they agree within 25%.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution-ShareAlike 3.0 Unported). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.