Skip to content
worldfires
ES · Spain · –

Palacios del Sil fire, March 2019 Palacios del Sil

Out · last detection 17 Mar 2019, 01:20 UTC

The fire started on 16 March 2019 in Palacios del Sil, Spain, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 246 hectares from satellite imagery, spread across a single municipality. According to EGIF (MITECO), it was detected on 15 March 2019 at 16:25 and declared extinguished on 17 March 2019.

It is the 46th largest in León since 2016 (of 86 with a page). Number 33 in Spain in 2019, of 102.

Burnt area
246ha
Copernicus perimeter
Duration
2days
16 Mar 2019 – 17 Mar 2019
Municipalities hit
1
municipalities
Started on
16 Mar
2019
Heat detections
12
in a single hotspot: 218 MW
Danger at start
1
Very low · FWI index
Average daily power
166MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Mar17 Mar
17 Mar 2019

How it evolved, day by day

16 Mar 2019 · 312 MW · 7 17 Mar 2019 · 19 MW · 5
16 Mar 17 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

14°high
47km/h · peak gust
31%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

  1. Palacios del Sil 1,141 inhabitants · 8.3 km from the centre where it started
    246 ha reached on 16 Mar
    1.4 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land58 %
  • Broadleaved forest23 %
  • Scrub and transitional woodland19 %

Natura 2000 protected area affected: 100 %

Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

Official record

According to EGIF (MITECO), this fire started on 15 March 2019 and burned 246 ha (the satellite measured 246 ha).

MITECO, Estadística General de Incendios Forestales (EGIF). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
16 Mar 14.2 °C 31 % 47 km/h 0.0 mm Very low 1
17 Mar 4.6 °C 68 % 36 km/h 3.9 mm Very low 0
18 Mar after 5.5 °C 60 % 36 km/h 0.0 mm Very low 0
19 Mar after 5.0 °C 72 % 37 km/h 0.0 mm Very low 0
20 Mar after 8.9 °C 55 % 35 km/h 0.0 mm Very low 0
21 Mar after 9.8 °C 42 % 26 km/h 0.0 mm Very low 0
22 Mar after 11.1 °C 41 % 22 km/h 0.0 mm Very low 1
23 Mar after 13.3 °C 33 % 22 km/h 0.0 mm Very low 1
24 Mar after 12.9 °C 44 % 32 km/h 0.2 mm Very low 2
25 Mar after 10.2 °C 50 % 47 km/h 0.0 mm Very low 3
26 Mar after 12.0 °C 31 % 46 km/h 0.0 mm Very low 4
27 Mar after 13.2 °C 28 % 36 km/h 0.0 mm Low 6

Its twins: fires that started in the same weather

It started with an FWI of 0.6, a minimum humidity of 31% and 2 days without rain. Fires in the area that started in weather like this since 2016: 26.

FWI at the start 0.6
Minimum humidity 31 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Cangas del Narcea fire, March 2023
114 ha 3 days FWI 1.8 Min. humidity 33 % 24 km away, in 2023

First rain (1 mm or more) after it ended: 1.5 mm on 31 Mar.

What happened to them

2 days
median duration
136 ha
median area
0 %
went past 1,000 ha
3.7 mm
rain at the end (median; 23 of 26 had it)

It was 1.8 times larger than the median of its twins and lasted 2 days, against 2 days.

Only 8 of its 26 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 3 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
47km/h · max. gust

It was considered over on 17 Mar, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 23 of 26, with a median of 3.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Mar 2019
After · 24 Mar 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 16 March 2019 the air beside the fire reached 17 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak17 µg/m³
Days over the guideline0 days
PM1022 µg/m³
14 Mar16 Mar18 Mar20 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 12Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Spain

Frequently asked questions

How long did the Palacios del Sil fire last?
Copernicus dates it between 16 March 2019 and 17 March 2019: 2 days between the first and last image with fire. According to EGIF (MITECO), it was detected on 15 March 2019 at 16:25 and declared extinguished on 17 March 2019.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 246 hectares (2.5 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered Palacios del Sil (246 ha, 1.4 %).
Did the fire reach a town?
The fire started in Palacios del Sil and came within 8.3 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 14.2 °C, humidity dropped to 31 % and gusts hit 47 km/h. The fire danger index (FWI) reached 1, class Very low.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Spain (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 26. Their median duration was 2 days and their median area 136 ha; 0 % went past 1,000 ha. Only 8 of its 26 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 3 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 12 Suomi-NPP VIIRS detections on those dates.
  • Compared with EGIF (MITECO): 246 official ha against 246 ha of perimeter; they agree within 25%.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.