Pai fire, 26 March 2020 Pai
The fire started on 26 March 2020 in Pai, Thailand, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,354 hectares from heat detections, spread across a single municipality.
It is the 211th largest in Mae Hong Son Province since 2016 (of 668 with a page). Number 189 in Thailand in 2020, of 666.
The power measured by the satellite is low (14.3 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
- Burnt area
- 2,354ha
- GWIS perimeter (Copernicus)
- Duration
- 7days
- 26 Mar 2020 – 1 Apr 2020
- Municipalities hit
- 1
- districts
- Started on
- 26 Mar
- 2020
- Heat detections
- 114
- in a single hotspot: 14 MW
- Danger at start
- 43
- Very high · FWI index
- Energy released
- 311MW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
76% of the perimeter overlaps earlier fires recorded since 2016: 1,164 ha in 2016, 483 ha in 2017, 140 ha in 2018, 1,246 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 1,799 ha that had burned before.
What happened to each town
-
Pai where it started2,369 ha reached on 19 Mar1.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 17 Mar | 37.5 °C | 22 % | 41 km/h | 0.0 mm | Very high 43 |
| 18 Mar | 37.6 °C | 21 % | 44 km/h | 0.0 mm | Very high 44 |
| 19 Mar | 37.3 °C | 21 % | 31 km/h | 0.0 mm | Very high 40 |
| 20 Mar | 36.9 °C | 24 % | 47 km/h | 0.0 mm | Very high 45 |
| 21 Mar | 35.2 °C | 26 % | 49 km/h | 0.4 mm | Very high 47 |
| 22 Mar | 34.2 °C | 26 % | 47 km/h | 0.6 mm | High 36 |
| 23 Mar | 35.2 °C | 24 % | 44 km/h | 0.0 mm | Very high 40 |
| 24 Mar | 36.1 °C | 22 % | 49 km/h | 0.0 mm | Very high 42 |
| 25 Mar | 35.7 °C | 20 % | 48 km/h | 0.0 mm | Very high 44 |
| 26 Mar | 36.2 °C | 21 % | 47 km/h | 0.0 mm | Very high 44 |
| 27 Mar | 37.2 °C | 24 % | 37 km/h | 0.0 mm | Very high 40 |
| 28 Mar | 38.6 °C | 24 % | 32 km/h | 0.0 mm | Very high 38 |
| 29 Mar | 38.5 °C | 26 % | 38 km/h | 0.0 mm | Very high 42 |
| 30 Mar | 38.9 °C | 25 % | 38 km/h | 0.0 mm | Very high 42 |
| 31 Mar | 39.7 °C | 23 % | 36 km/h | 0.0 mm | Very high 42 |
| 1 Apr | 39.5 °C | 18 % | 41 km/h | 0.0 mm | Very high 46 |
| 2 Apr after | 38.6 °C | 19 % | 46 km/h | 0.0 mm | Very high 48 |
| 3 Apr after | 39.4 °C | 15 % | 42 km/h | 0.0 mm | Very high 49 |
| 4 Apr after | 38.9 °C | 19 % | 37 km/h | 0.0 mm | Very high 48 |
| 5 Apr after | 38.3 °C | 21 % | 46 km/h | 0.0 mm | Extreme 52 |
| 6 Apr after | 37.2 °C | 27 % | 49 km/h | 0.0 mm | Very high 47 |
| 7 Apr after | 37.4 °C | 22 % | 45 km/h | 0.0 mm | Very high 45 |
| 8 Apr after | 37.5 °C | 23 % | 30 km/h | 0.0 mm | Very high 41 |
| 9 Apr after | 36.9 °C | 27 % | 31 km/h | 0.0 mm | Very high 40 |
| 10 Apr after | 38.1 °C | 19 % | 45 km/h | 0.0 mm | Very high 46 |
| 11 Apr after | 37.8 °C | 27 % | 31 km/h | 0.1 mm | Very high 42 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 114Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Pai fire last?
- GWIS (Copernicus) dates it between 26 March 2020 and 1 April 2020: 7 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,354 hectares (23.5 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Pai (2,369 ha, 1.0 %).
- What was the weather like?
- During the fire the temperature reached 39.7 °C, humidity dropped to 18 % and gusts hit 49 km/h. The fire danger index (FWI) reached 47, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Thailand (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 199 · 191
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.