Pai fire, 3 March 2020 Pai
The fire started on 3 March 2020 in Pai, Thailand, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,726 hectares from heat detections, spread across a single municipality.
It is the 108th largest in Mae Hong Son Province since 2016 (of 668 with a page). Number 96 in Thailand in 2020, of 666.
The power measured by the satellite is low (20.1 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
- Burnt area
- 3,726ha
- GWIS perimeter (Copernicus)
- Duration
- 9days
- 3 Mar 2020 – 11 Mar 2020
- Municipalities hit
- 1
- districts
- Started on
- 3 Mar
- 2020
- Heat detections
- 172
- in a single hotspot: 20 MW
- Danger at start
- 36
- High · FWI index
- Energy released
- 505MW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
92% of the perimeter overlaps earlier fires recorded since 2016: 1,586 ha in 2016, 2,646 ha in 2017, 1,022 ha in 2018, 1,598 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 3,442 ha that had burned before.
- 2,008 ha Pai fire, March 2017 6,340 ha in total; the hectares shown are those it shares with this fire
- 1,257 ha Pai fire, March 2016 2,719 ha in total; the hectares shown are those it shares with this fire
- 1,049 ha Pai fire, March 2019 2,326 ha in total; the hectares shown are those it shares with this fire
What happened to each town
-
Pai where it started3,748 ha reached on 29 Feb1.6 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 29 Feb | 34.0 °C | 23 % | 41 km/h | 0.0 mm | High 36 |
| 1 Mar | 35.1 °C | 22 % | 38 km/h | 0.0 mm | High 36 |
| 2 Mar | 34.9 °C | 19 % | 40 km/h | 0.0 mm | Very high 39 |
| 3 Mar | 33.2 °C | 26 % | 48 km/h | 0.0 mm | Very high 41 |
| 4 Mar | 32.9 °C | 27 % | 37 km/h | 0.0 mm | High 37 |
| 5 Mar | 34.5 °C | 21 % | 40 km/h | 0.0 mm | Very high 39 |
| 6 Mar | 34.1 °C | 25 % | 48 km/h | 0.0 mm | Very high 42 |
| 7 Mar | 35.1 °C | 24 % | 47 km/h | 0.0 mm | Very high 42 |
| 8 Mar | 34.9 °C | 25 % | 51 km/h | 0.0 mm | Very high 44 |
| 9 Mar | 35.3 °C | 23 % | 44 km/h | 0.0 mm | Very high 41 |
| 10 Mar | 36.4 °C | 22 % | 26 km/h | 0.0 mm | High 36 |
| 11 Mar | 37.3 °C | 20 % | 38 km/h | 0.0 mm | Very high 41 |
| 12 Mar after | 37.3 °C | 22 % | 35 km/h | 0.0 mm | Very high 40 |
| 13 Mar after | 38.2 °C | 23 % | 26 km/h | 0.0 mm | High 37 |
| 14 Mar after | 37.9 °C | 25 % | 19 km/h | 0.0 mm | Very high 38 |
| 15 Mar after | 38.5 °C | 24 % | 34 km/h | 0.0 mm | Very high 41 |
| 16 Mar after | 37.4 °C | 21 % | 43 km/h | 0.0 mm | Very high 44 |
| 17 Mar after | 37.3 °C | 22 % | 41 km/h | 0.0 mm | Very high 44 |
| 18 Mar after | 37.3 °C | 21 % | 44 km/h | 0.0 mm | Very high 45 |
| 19 Mar after | 37.0 °C | 21 % | 31 km/h | 0.0 mm | Very high 41 |
| 20 Mar after | 36.6 °C | 24 % | 47 km/h | 0.0 mm | Very high 46 |
| 21 Mar after | 35.0 °C | 26 % | 49 km/h | 0.4 mm | Very high 48 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 172Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 22,763 haPai24 March 2026 · 26 days · 8 km away
- 16,424 haMueang Mae Hong Son29 February 2024 · 18 days · 28 km away
- 30,775 haPai24 March 2026 · 24 days · 33 km away
- 30,393 haPang Mapha23 March 2026 · 31 days · 34 km away
- 11,077 haPai28 February 2020 · 26 days · 39 km away
- 11,795 haPang Mapha24 March 2026 · 11 days · 40 km away
Frequently asked questions
- How long did the Pai fire last?
- GWIS (Copernicus) dates it between 3 March 2020 and 11 March 2020: 9 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,726 hectares (37.3 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Pai (3,748 ha, 1.6 %).
- What was the weather like?
- During the fire the temperature reached 37.3 °C, humidity dropped to 19 % and gusts hit 51 km/h. The fire danger index (FWI) reached 44, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Thailand (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 199 · 191
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.