Skip to content
worldfires
RU · Russia · –

Oymyakonsky Ulus fire, 12 July 2021 Oymyakonsky Ulus

Out · last detection

The fire started on in Oymyakonsky Ulus, Russia, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,656 hectares from heat detections, spread across a single municipality.

It is number 925 by size of the 1347 fires with a page that started in Sakha Republic since 2016. Number 379 in Russia in 2021, of 581.

Burnt area
4,656ha
GWIS perimeter (Copernicus)
Duration
10days
12 Jul 2021 – 21 Jul 2021
Municipalities hit
1
districts
Started on
12 Jul
2021
Heat detections
507
in a single hotspot: 166 MW
Danger at start
8
Low · FWI index
Average daily power
348MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Jul21 Jul
20 Jul 2021

How it evolved, day by day

12 Jul 2021 · 146 MW · 18 13 Jul 2021 · 3 MW · 2 14 Jul 2021 · 475 MW · 73 15 Jul 2021 · 411 MW · 29 16 Jul 2021 · 92 MW · 14 17 Jul 2021 · 132 MW · 30 18 Jul 2021 · 976 MW · 155 19 Jul 2021 · 573 MW · 70 20 Jul 2021 · 324 MW · 116
12 Jul 14 Jul 16 Jul 18 Jul 20 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

27°high
49km/h · peak gust
18%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 19.9 mm on 22 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.9% of the area of London (47 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Oymyakonsky Ulus where it started
    4,533 ha reached on 12 Jul
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Jul 17.4 °C 39 % 36 km/h 2.9 mm Low 8
13 Jul 19.9 °C 28 % 20 km/h 0.0 mm Moderate 12
14 Jul 22.2 °C 23 % 40 km/h 0.0 mm High 28
15 Jul 24.1 °C 27 % 49 km/h 0.0 mm Very high 50
16 Jul 22.0 °C 35 % 27 km/h 0.5 mm High 30
17 Jul 24.3 °C 36 % 31 km/h 0.7 mm Moderate 19
18 Jul 21.8 °C 31 % 45 km/h 0.0 mm Very high 40
19 Jul 25.1 °C 20 % 15 km/h 0.0 mm High 25
20 Jul 26.8 °C 18 % 42 km/h 0.0 mm Very high 39
21 Jul 25.6 °C 26 % 41 km/h 0.0 mm High 31
22 Jul after 18.0 °C 68 % 20 km/h 19.9 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 8.3, a minimum humidity of 39% and 3 days without rain. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 8.3
Minimum humidity 39 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ust-Maysky Ulus fire, June 2023
3,761 ha 16 days FWI 8.0 Min. humidity 37 % 194 km away, in 2023

First rain (1 mm or more) after it ended: 22.0 mm on 16 Jul.

What happened to them

14 days
median duration
5,929 ha
median area
12 %
went past 10,000 ha
7.5 mm
rain at the end (median; 17 of 17 had it)

It burned an area similar to its twins (4,656 ha against a median of 5,929 ha) and lasted 10 days, against 14 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 7.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

19.9 mmfirst rain
22 Julthe day after it ended
49km/h · max. gust

It was considered over on 21 Jul, and on 22 Jul 19.9 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 17 of 17, with a median of 7.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Jul 2021
After · 28 Jul 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 507Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Oymyakonsky Ulus fire last?
GWIS (Copernicus) dates it between 12 July 2021 and 21 July 2021: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,656 hectares (46.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Oymyakonsky Ulus (4,533 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 26.8 °C, humidity dropped to 18 % and gusts hit 49 km/h. The fire danger index (FWI) reached 50, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 14 days and their median area 5,929 ha; 12 % went past 10,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 7.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 507 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.