Skip to content
worldfires
RU · Russia · –

Olenyoksky Ulus fire, 10 August 2026 Olenyoksky Ulus

Out · last detection

The fire started on in Olenyoksky Ulus, Russia, and satellites saw it burning for 22 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 21,165 hectares from heat detections, spread across a single municipality.

Number 53 in Russia in 2026, of 420.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
21,165ha
GWIS perimeter (Copernicus)
Duration
22days
10 Aug 2026 – 31 Aug 2026
Municipalities hit
1
districts
Started on
10 Aug
2026
Heat detections
3,145
in a single hotspot: 214 MW
Danger at start
13
Moderate · FWI index
Average daily power
1.2GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Aug31 Aug
31 Aug 2026

How it evolved, day by day

10 Aug 2026 · 100 MW · 10 11 Aug 2026 · 11 MW · 4 12 Aug 2026 · 491 MW · 64 13 Aug 2026 · 1,627 MW · 82 16 Aug 2026 · 370 MW · 44 17 Aug 2026 · 7 MW · 2 18 Aug 2026 · 1,591 MW · 330 19 Aug 2026 · 2,547 MW · 354 20 Aug 2026 · 637 MW · 105 21 Aug 2026 · 931 MW · 169 22 Aug 2026 · 2,289 MW · 344 23 Aug 2026 · 3,904 MW · 438 24 Aug 2026 · 2,574 MW · 188 25 Aug 2026 · 3,157 MW · 235 26 Aug 2026 · 2,120 MW · 439 27 Aug 2026 · 169 MW · 85 28 Aug 2026 · 557 MW · 85 29 Aug 2026 · 175 MW · 51 30 Aug 2026 · 1,135 MW · 110 31 Aug 2026 · 28 MW · 6
10 Aug 16 Aug 20 Aug 23 Aug 28 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (80 passes) and with what wind. Watch the film

The weather it burned in

22°high
52km/h · peak gust
28%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 1.1 mm on 2 Sept.

This area had burned before

1% of the perimeter overlaps earlier fires recorded since 2016: 302 ha in 2020.

How big is it?

10 km
It burned the equivalent of 13% of the area of London (212 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Olenyoksky Ulus where it started
    21,802 ha reached on 10 Aug
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Aug 14.2 °C 54 % 46 km/h 0.6 mm Moderate 13
11 Aug 14.2 °C 49 % 30 km/h 0.3 mm Moderate 14
12 Aug 17.1 °C 33 % 20 km/h 0.0 mm Moderate 12
13 Aug 15.9 °C 42 % 28 km/h 0.1 mm Moderate 17
14 Aug 12.7 °C 54 % 39 km/h 1.0 mm Moderate 16
15 Aug 13.9 °C 62 % 30 km/h 0.3 mm Moderate 15
16 Aug 18.4 °C 53 % 36 km/h 1.3 mm Moderate 14
17 Aug 13.6 °C 77 % 42 km/h 1.6 mm Low 6
18 Aug 11.6 °C 48 % 35 km/h 0.0 mm Low 8
19 Aug 15.8 °C 41 % 20 km/h 0.0 mm Low 7
20 Aug 15.5 °C 56 % 24 km/h 0.2 mm Moderate 12
21 Aug 14.1 °C 40 % 18 km/h 0.2 mm Moderate 13
22 Aug 18.5 °C 35 % 25 km/h 0.0 mm Moderate 18
23 Aug 22.2 °C 29 % 36 km/h 0.0 mm High 29
24 Aug 16.3 °C 56 % 28 km/h 0.0 mm Moderate 21
25 Aug 16.9 °C 42 % 32 km/h 0.0 mm Moderate 19
26 Aug 20.0 °C 34 % 52 km/h 0.0 mm High 34
27 Aug 20.7 °C 34 % 46 km/h 0.0 mm Very high 42
28 Aug 20.0 °C 30 % 28 km/h 0.0 mm High 24
29 Aug 18.6 °C 28 % 37 km/h 0.0 mm High 27
30 Aug 18.4 °C 47 % 27 km/h 0.1 mm High 22
31 Aug 15.4 °C 68 % 28 km/h 3.1 mm Moderate 18
1 Sept after 21.1 °C 52 % 42 km/h 0.0 mm Low 7
2 Sept after 19.0 °C 45 % 51 km/h 1.1 mm High 26

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Aug 2026
After · 7 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 28 August 2026 the air beside the fire reached 1,006 µg/m³ of PM2.5. That day averaged 637: 42 times the WHO daily guideline (15).

PM2.5 peak1,006 µg/m³
Days over the guideline26 days
PM101,017 µg/m³
Optical depth3.80
3 Aug10 Aug17 Aug24 Aug31 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 3,145Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Olenyoksky Ulus fire last?
GWIS (Copernicus) dates it between 10 August 2026 and 31 August 2026: 22 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 21,165 hectares (211.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Olenyoksky Ulus (21,802 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 22.2 °C, humidity dropped to 28 % and gusts hit 52 km/h. The fire danger index (FWI) reached 42, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 3,145 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.