Skip to content
worldfires
RU · Russia · –

Olenyoksky Ulus fire, 30 July 2026 Olenyoksky Ulus

Out · last detection 30 Aug 2026, 19:04 UTC

The fire started on 30 July 2026 in Olenyoksky Ulus, Russia, and satellites saw it burning for 32 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 14,017 hectares from heat detections, spread across a single municipality.

Number 86 in Russia in 2026, of 420.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…

Suggestions: Olenyoksky Ulus · 2026

Burnt area
14,017ha
GWIS perimeter (Copernicus)
Duration
32days
30 Jul 2026 – 30 Aug 2026
Municipalities hit
1
districts
Started on
30 Jul
2026
Heat detections
1,918
in a single hotspot: 403 MW
Danger at start
26
High · FWI index
Average daily power
1.7GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Jul30 Aug
30 Aug 2026

How it evolved, day by day

30 Jul 2026 · 2 MW · 1 31 Jul 2026 · 4,233 MW · 78 1 Aug 2026 · 10,338 MW · 245 5 Aug 2026 · 1,989 MW · 140 6 Aug 2026 · 17,979 MW · 434 7 Aug 2026 · 1,274 MW · 90 10 Aug 2026 · 135 MW · 17 11 Aug 2026 · 125 MW · 44 12 Aug 2026 · 448 MW · 42 16 Aug 2026 · 340 MW · 36 17 Aug 2026 · 32 MW · 7 18 Aug 2026 · 23 MW · 11 19 Aug 2026 · 206 MW · 51 20 Aug 2026 · 769 MW · 133 21 Aug 2026 · 409 MW · 92 22 Aug 2026 · 2,291 MW · 201 23 Aug 2026 · 597 MW · 138 24 Aug 2026 · 56 MW · 20 25 Aug 2026 · 86 MW · 19 26 Aug 2026 · 105 MW · 42 27 Aug 2026 · 64 MW · 35 28 Aug 2026 · 59 MW · 22 29 Aug 2026 · 5 MW · 3 30 Aug 2026 · 63 MW · 17
30 Jul 6 Aug 17 Aug 22 Aug 27 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (83 passes) and with what wind. Watch the film

The weather it burned in

31°high
53km/h · peak gust
19%lowest humidity

It had gone 21 days without rain (1 mm or more) when it started. Rain came after the fire: 1.9 mm on 31 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 8.9% of the area of London (140 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Olenyoksky Ulus where it started
    16,391 ha reached on 30 Jul
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Jul 27.8 °C 43 % 42 km/h 0.0 mm High 26
31 Jul 30.9 °C 30 % 40 km/h 0.1 mm High 35
1 Aug 30.4 °C 31 % 42 km/h 0.0 mm High 34
2 Aug 22.7 °C 50 % 53 km/h 0.9 mm High 24
3 Aug 9.1 °C 48 % 47 km/h 0.0 mm High 21
4 Aug 13.2 °C 48 % 49 km/h 0.0 mm High 27
5 Aug 22.4 °C 27 % 26 km/h 0.0 mm Moderate 21
6 Aug 26.5 °C 19 % 45 km/h 0.0 mm Very high 43
7 Aug 22.7 °C 37 % 46 km/h 0.0 mm Very high 48
8 Aug 22.5 °C 54 % 35 km/h 1.7 mm Moderate 18
9 Aug 17.9 °C 54 % 48 km/h 0.2 mm Moderate 16
10 Aug 16.1 °C 43 % 36 km/h 0.0 mm Moderate 17
11 Aug 17.0 °C 39 % 28 km/h 0.0 mm Moderate 18
12 Aug 18.1 °C 40 % 20 km/h 0.0 mm Moderate 16
13 Aug 17.0 °C 44 % 28 km/h 0.0 mm Moderate 18
14 Aug 16.1 °C 45 % 29 km/h 0.2 mm Moderate 21
15 Aug 14.9 °C 62 % 26 km/h 0.4 mm Moderate 18
16 Aug 21.6 °C 42 % 23 km/h 0.0 mm Moderate 20
17 Aug 20.0 °C 59 % 34 km/h 1.7 mm Moderate 12
18 Aug 15.1 °C 40 % 24 km/h 0.0 mm Low 10
19 Aug 17.3 °C 37 % 14 km/h 0.0 mm Low 10
20 Aug 19.2 °C 37 % 15 km/h 0.0 mm Moderate 15
21 Aug 17.5 °C 44 % 26 km/h 0.0 mm Moderate 20
22 Aug 19.9 °C 30 % 18 km/h 0.0 mm Moderate 18
23 Aug 23.7 °C 28 % 28 km/h 0.0 mm High 22
24 Aug 19.9 °C 46 % 36 km/h 0.0 mm High 24
25 Aug 19.2 °C 44 % 23 km/h 0.0 mm High 22
26 Aug 21.6 °C 34 % 39 km/h 0.0 mm High 33
27 Aug 22.2 °C 33 % 39 km/h 0.0 mm Very high 40
28 Aug 21.3 °C 28 % 26 km/h 0.0 mm High 25
29 Aug 20.2 °C 28 % 33 km/h 0.0 mm High 28
30 Aug 20.6 °C 45 % 26 km/h 0.0 mm Moderate 20
31 Aug after 16.3 °C 70 % 19 km/h 1.9 mm Moderate 16

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Jul 2026
After · 6 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 29 August 2026 the air beside the fire reached 1,144 µg/m³ of PM2.5. That day averaged 660: 44 times the WHO daily guideline (15).

PM2.5 peak1,144 µg/m³
Days over the guideline28 days
PM101,159 µg/m³
Optical depth4.05
28 Jul5 Aug13 Aug21 Aug29 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,918Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Olenyoksky Ulus fire last?
GWIS (Copernicus) dates it between 30 July 2026 and 30 August 2026: 32 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 14,017 hectares (140.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Olenyoksky Ulus (16,391 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 30.9 °C, humidity dropped to 19 % and gusts hit 53 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 16,245 → 14,017 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,918 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.