Skip to content
worldfires
ID · Indonesia · –

Ogan Komering Ilir fire, 26 August 2026 Ogan Komering Ilir, Banyu Asin

Out · last detection

The fire started on in Ogan Komering Ilir, Indonesia, and satellites saw it burning for 60 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 79,293 hectares from heat detections, spread across 2 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

We are reviewing this page: some of its data look inconsistent (the place, the dates or the area), so treat them with caution.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
79,293ha
GWIS perimeter (Copernicus)
Duration
60days
26 Aug 2026 – 24 Oct 2026
Municipalities hit
2
regencies
Started on
26 Aug
2026
Heat detections
3,424
in a single hotspot: 190 MW
Danger at start
36
High · FWI index
Average daily power
438MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 26 Aug24 Oct
24 Oct 2026

How it evolved, day by day

26 Aug 2026 · 68 MW · 16 27 Aug 2026 · 180 MW · 29 28 Aug 2026 · 62 MW · 18 29 Aug 2026 · 88 MW · 19 30 Aug 2026 · 84 MW · 20 31 Aug 2026 · 337 MW · 26 1 Sept 2026 · 510 MW · 52 2 Sept 2026 · 1,017 MW · 79 3 Sept 2026 · 541 MW · 54 4 Sept 2026 · 600 MW · 57 5 Sept 2026 · 1,037 MW · 83 6 Sept 2026 · 537 MW · 56 7 Sept 2026 · 462 MW · 58 8 Sept 2026 · 315 MW · 59 9 Sept 2026 · 417 MW · 63 10 Sept 2026 · 127 MW · 29 11 Sept 2026 · 95 MW · 12 12 Sept 2026 · 92 MW · 49 13 Sept 2026 · 89 MW · 32 14 Sept 2026 · 1,032 MW · 129 15 Sept 2026 · 2,090 MW · 197 16 Sept 2026 · 730 MW · 71 17 Sept 2026 · 214 MW · 58 18 Sept 2026 · 206 MW · 70 19 Sept 2026 · 520 MW · 72 20 Sept 2026 · 795 MW · 82 21 Sept 2026 · 114 MW · 16 23 Sept 2026 · 172 MW · 24 24 Sept 2026 · 14 MW · 6 25 Sept 2026 · 260 MW · 27 26 Sept 2026 · 966 MW · 117 27 Sept 2026 · 21 MW · 4 28 Sept 2026 · 485 MW · 80 29 Sept 2026 · 986 MW · 164 30 Sept 2026 · 333 MW · 40 1 Oct 2026 · 3,630 MW · 317 2 Oct 2026 · 783 MW · 67 3 Oct 2026 · 257 MW · 64 4 Oct 2026 · 266 MW · 49 5 Oct 2026 · 538 MW · 56 6 Oct 2026 · 89 MW · 19 7 Oct 2026 · 252 MW · 26 8 Oct 2026 · 177 MW · 33 9 Oct 2026 · 120 MW · 39 10 Oct 2026 · 87 MW · 36 11 Oct 2026 · 407 MW · 60 12 Oct 2026 · 427 MW · 64 13 Oct 2026 · 120 MW · 43 14 Oct 2026 · 812 MW · 149 15 Oct 2026 · 133 MW · 40 16 Oct 2026 · 237 MW · 37 17 Oct 2026 · 5 MW · 2 18 Oct 2026 · 106 MW · 7 19 Oct 2026 · 361 MW · 72 20 Oct 2026 · 143 MW · 59 21 Oct 2026 · 477 MW · 82 22 Oct 2026 · 632 MW · 102 23 Oct 2026 · 193 MW · 30 24 Oct 2026 · 15 MW · 3
26 Aug 7 Sept 19 Sept 1 Oct 14 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
41km/h · peak gust
33%lowest humidity

It had gone 33 days without rain (1 mm or more) when it started. Rain came after the fire: 9.1 mm on 25 Oct.

This area had burned before

92% of the perimeter overlaps earlier fires recorded since 2016: 3,313 ha in 2018, 83,012 ha in 2019, 48,027 ha in 2023, 1,188 ha in 2024, 2,738 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 72,581 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 50% of the area of London (793 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Ogan Komering Ilir where it started
    98,550 ha reached on 26 Aug
    5.5 %
  2. 6,644 ha reached on 4 Sept
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area27 ha
Residents≈ 2,100

Inside the perimeter there were about 27 hectares of built-up land and about 2,100 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
26 Aug 34.6 °C 37 % 36 km/h 0.0 mm High 36
27 Aug 35.3 °C 36 % 37 km/h 0.0 mm Very high 38
28 Aug 35.0 °C 42 % 33 km/h 0.1 mm High 34
29 Aug 35.1 °C 43 % 32 km/h 0.0 mm High 36
30 Aug 34.7 °C 48 % 31 km/h 0.6 mm High 32
31 Aug 36.0 °C 44 % 32 km/h 0.2 mm High 27
1 Sept 35.3 °C 45 % 38 km/h 0.0 mm High 34
2 Sept 35.8 °C 37 % 36 km/h 0.0 mm High 38
3 Sept 34.7 °C 37 % 36 km/h 0.0 mm Very high 40
4 Sept 35.2 °C 37 % 36 km/h 0.0 mm Very high 38
5 Sept 34.2 °C 46 % 38 km/h 0.1 mm Very high 39
6 Sept 34.5 °C 41 % 36 km/h 0.0 mm High 36
7 Sept 34.4 °C 42 % 36 km/h 0.0 mm High 37
8 Sept 35.2 °C 42 % 28 km/h 0.0 mm High 33
9 Sept 35.1 °C 45 % 32 km/h 0.2 mm High 36
10 Sept 34.6 °C 45 % 30 km/h 0.1 mm High 35
11 Sept 34.8 °C 42 % 41 km/h 0.1 mm Very high 40
12 Sept 35.3 °C 38 % 38 km/h 0.0 mm Very high 40
13 Sept 34.1 °C 43 % 41 km/h 0.0 mm Very high 44
14 Sept 34.9 °C 40 % 41 km/h 0.0 mm Very high 43
15 Sept 34.7 °C 39 % 41 km/h 0.0 mm Very high 42
16 Sept 35.0 °C 38 % 32 km/h 0.0 mm High 37
17 Sept 35.0 °C 42 % 29 km/h 0.0 mm High 33
18 Sept 34.5 °C 43 % 30 km/h 0.1 mm High 38
19 Sept 35.0 °C 45 % 33 km/h 0.0 mm Very high 39
20 Sept 35.7 °C 45 % 37 km/h 0.3 mm Very high 39
21 Sept 35.5 °C 45 % 33 km/h 0.4 mm High 37
22 Sept 33.8 °C 50 % 35 km/h 2.1 mm High 35
23 Sept 35.0 °C 50 % 36 km/h 3.7 mm Moderate 20
24 Sept 34.8 °C 44 % 26 km/h 0.0 mm Moderate 13
25 Sept 34.9 °C 47 % 27 km/h 0.2 mm High 26
26 Sept 36.3 °C 39 % 30 km/h 0.0 mm High 30
27 Sept 35.3 °C 41 % 34 km/h 0.0 mm High 33
28 Sept 35.5 °C 36 % 41 km/h 0.0 mm Very high 41
29 Sept 36.0 °C 38 % 31 km/h 0.0 mm High 36
30 Sept 35.6 °C 41 % 25 km/h 0.0 mm High 29
1 Oct 37.0 °C 36 % 30 km/h 0.0 mm High 34
2 Oct 36.1 °C 37 % 33 km/h 0.0 mm High 36
3 Oct 36.6 °C 33 % 39 km/h 0.0 mm Very high 40
4 Oct 35.7 °C 37 % 38 km/h 0.0 mm Very high 42
5 Oct 36.3 °C 33 % 34 km/h 0.0 mm Very high 43
6 Oct 36.1 °C 35 % 35 km/h 0.0 mm Very high 42
7 Oct 35.8 °C 39 % 35 km/h 0.0 mm Very high 44
8 Oct 34.8 °C 43 % 27 km/h 0.0 mm High 37
9 Oct 35.9 °C 38 % 23 km/h 0.0 mm High 36
10 Oct 36.1 °C 40 % 26 km/h 0.0 mm High 36
11 Oct 36.4 °C 36 % 31 km/h 0.0 mm High 36
12 Oct 35.6 °C 38 % 33 km/h 0.0 mm Very high 42
13 Oct 36.5 °C 34 % 37 km/h 0.1 mm Very high 48
14 Oct 36.3 °C 35 % 41 km/h 0.0 mm Very high 48
15 Oct 35.1 °C 40 % 35 km/h 0.0 mm Very high 45
16 Oct 34.1 °C 50 % 27 km/h 0.5 mm High 33
17 Oct 35.3 °C 40 % 36 km/h 0.0 mm Very high 39
18 Oct 36.4 °C 40 % 36 km/h 0.0 mm Very high 40
19 Oct 35.8 °C 40 % 30 km/h 0.0 mm High 36
20 Oct 35.4 °C 41 % 29 km/h 0.0 mm High 36
21 Oct 36.4 °C 35 % 32 km/h 0.2 mm High 35
22 Oct 36.1 °C 38 % 36 km/h 0.0 mm Very high 42
23 Oct 35.8 °C 42 % 27 km/h 0.3 mm High 35
24 Oct 36.7 °C 41 % 33 km/h 0.3 mm High 36
25 Oct after 33.4 °C 51 % 26 km/h 9.1 mm Moderate 17

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 19 Aug 2026
After · 31 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 22 September 2026 the air beside the fire reached 433 µg/m³ of PM2.5. That day averaged 178: 12 times the WHO daily guideline (15).

PM2.5 peak433 µg/m³
Days over the guideline59 days
PM10439 µg/m³
Optical depth5.94
24 Aug5 Sept17 Sept29 Sept11 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 3,424Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Indonesia

Frequently asked questions

How long did the Ogan Komering Ilir fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 26 August 2026 to 24 October 2026 (60 days). The perimeter dates it from 27 August 2026 to 24 October 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 79,293 hectares (792.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Ogan Komering Ilir (98,550 ha, 5.5 %); Banyu Asin (6,644 ha, 0.6 %).
Is the Ogan Komering Ilir fire still active?
No fire detections since 24 Oct 2026, 18:53 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 37.0 °C, humidity dropped to 33 % and gusts hit 41 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 104,527 → 79,324 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 9 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 27 August 2026 to 24 October 2026. 3,424 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.