Skip to content
worldfires
IN · India · –

Obulavaripalle fire, March 2019 Obulavaripalle, Kodur, T Sundupalle

Out · last measured on 4 Apr 2019

The fire started on 31 March 2019 in Obulavaripalle, India, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,735 hectares from heat detections, spread across 4 municipalities.

It is the 3th largest in Andhra Pradesh since 2016 (of 16 with a page). Number 4 in India in 2019, of 25.

We have the GWIS perimeter for this fire, but the VIIRS sensors did not capture it in enough detail: no day-by-day evolution, but the split by municipality is there.

Burnt area
10,735ha
GWIS perimeter (Copernicus)
Duration
5days
31 Mar 2019 – 4 Apr 2019
Municipalities hit
4
subdistricts
Started on
31 Mar
2019
Danger at start
41
Very high · FWI index

Where it burned

The weather it burned in

38°high
41km/h · peak gust
21%lowest humidity

It had gone 29 days without rain (1 mm or more) when it started.

This area had burned before

53% of the perimeter overlaps earlier fires recorded since 2016: 1,514 ha in 2016, 4,976 ha in 2017, 326 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 5,710 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.8% of the area of London (107 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Obulavaripalle where it started
    6,974 ha
    15 %
  2. 3,276 ha
    4.8 %
  3. 454 ha
    0.9 %
  4. 92 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
31 Mar 37.6 °C 22 % 32 km/h 0.0 mm Very high 41
1 Apr 36.9 °C 21 % 37 km/h 0.0 mm Very high 47
2 Apr 36.7 °C 23 % 35 km/h 0.0 mm Very high 45
3 Apr 35.8 °C 28 % 38 km/h 0.0 mm Extreme 52
4 Apr 35.7 °C 23 % 41 km/h 0.0 mm Extreme 56
5 Apr after 34.6 °C 16 % 37 km/h 0.0 mm Very high 44
6 Apr after 36.3 °C 22 % 35 km/h 0.0 mm Very high 49
7 Apr after 36.8 °C 22 % 36 km/h 0.0 mm Extreme 50
8 Apr after 36.0 °C 27 % 34 km/h 0.0 mm Very high 48
9 Apr after 35.7 °C 31 % 29 km/h 0.0 mm Very high 43
10 Apr after 35.9 °C 27 % 34 km/h 0.0 mm Very high 44
11 Apr after 36.8 °C 25 % 31 km/h 0.0 mm Very high 45
12 Apr after 36.4 °C 25 % 34 km/h 0.0 mm Very high 45
13 Apr after 36.6 °C 22 % 37 km/h 0.0 mm Extreme 50
14 Apr after 36.9 °C 22 % 41 km/h 0.0 mm Extreme 54

Its twins: fires that started in the same weather

It started with an FWI of 41.0, a minimum humidity of 22% and 29 days without rain. Fires in the area that started in weather like this since 2016: 10.

FWI at the start 41.0
Minimum humidity 22 %
Days without rain 29
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Atmakur fire, March 2021
9,853 ha 14 days FWI 41.2 Min. humidity 22 % 212 km away, in 2021

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

Fires in the area that started in similar weather: 10. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
41km/h · max. gust

It was considered over on 4 Apr, and not even 1 mm fell in the following ten days: it went out without rain.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Mar 2019
After · 11 Apr 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Other fires nearby

All fires in India

Frequently asked questions

How long did the Obulavaripalle fire last?
GWIS (Copernicus) dates it between 31 March 2019 and 4 April 2019: 5 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,735 hectares (107.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 4 municipalities: Obulavaripalle (6,974 ha, 15 %); Kodur (3,276 ha, 4.8 %); T Sundupalle (454 ha, 0.9 %); Yerravaripalem (92 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 37.6 °C, humidity dropped to 21 % and gusts hit 41 km/h. The fire danger index (FWI) reached 56, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of India (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.