Skip to content
worldfires
CA · Canada · –

Northern Rockies fire, 11 August 2018 Northern Rockies, Region 4, Unorganized

Out · last detection 21 Aug 2018, 21:17 UTC

The fire started on 11 August 2018 in Northern Rockies, Canada, and satellites saw it burning for 10 days. Canada’s CWFIS (Natural Resources Canada) mapped an official burnt perimeter of 1,306 hectares from satellite imagery, spread across 2 census subdivisions.

It is the 298th largest in British Columbia since 2016 (of 346 with a page). Number 184 in Canada in 2018, of 211.

Burnt area
1,306ha
official perimeter (CWFIS)
Duration
10days
11 Aug 2018 – 20 Aug 2018
Census subdivisions hit
2
municipalities
Started on
11 Aug
2018
Heat detections
155
in a single hotspot: 0 MW
Danger at start
16
Moderate · FWI index
Average daily power
61MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Aug20 Aug
21 Aug 2018

How it evolved, day by day

12 Aug 2018 · 4 MW · 1 13 Aug 2018 · 48 MW · 17 14 Aug 2018 · 154 MW · 26 15 Aug 2018 · 77 MW · 20 16 Aug 2018 · 78 MW · 9 17 Aug 2018 · 64 MW · 19 18 Aug 2018 · 84 MW · 47 19 Aug 2018 · 25 MW · 12 21 Aug 2018 · 16 MW · 4
12 Aug 14 Aug 16 Aug 18 Aug 21 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high
68km/h · peak gust
21%lowest humidity

It had gone 12 days without rain (1 mm or more) when it started. Rain came after the fire: 10.2 mm on 25 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.8% of the area of London (13 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each census subdivision

  1. Northern Rockies where it started
    1,336 ha
    0.0 %
  2. 2 ha
    0.0 %

Burnt area inside each census subdivision, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Aug 19.8 °C 37 % 27 km/h 0.5 mm Moderate 16
12 Aug 23.8 °C 26 % 28 km/h 0.2 mm Moderate 18
13 Aug 25.6 °C 31 % 60 km/h 0.0 mm High 35
14 Aug 22.7 °C 32 % 68 km/h 0.2 mm High 37
15 Aug 20.4 °C 32 % 36 km/h 0.0 mm Moderate 17
16 Aug 22.6 °C 26 % 46 km/h 0.0 mm High 30
17 Aug 20.1 °C 21 % 59 km/h 0.0 mm Very high 39
18 Aug 21.1 °C 26 % 46 km/h 0.0 mm High 31
19 Aug 22.3 °C 25 % 26 km/h 0.0 mm High 22
20 Aug 26.4 °C 24 % 31 km/h 0.0 mm High 26
21 Aug after 27.5 °C 32 % 33 km/h 0.0 mm High 24
22 Aug after 19.7 °C 44 % 30 km/h 0.0 mm Moderate 20
23 Aug after 10.8 °C 68 % 22 km/h 0.4 mm Low 10
24 Aug after 13.4 °C 63 % 24 km/h 0.1 mm Moderate 13
25 Aug after 16.4 °C 53 % 33 km/h 10.2 mm Very low 4

Its twins: fires that started in the same weather

It started with an FWI of 15.7, a minimum humidity of 37% and 12 days without rain. Fires in the area that started in weather like this since 2016: 26.

FWI at the start 15.7
Minimum humidity 37 %
Days without rain 12
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Mackenzie County fire, September 2017
13,638 ha 3 days FWI 15.0 Min. humidity 36 % 238 km away, in 2017

First rain (1 mm or more) after it ended: 1.1 mm on 9 Sept.

What happened to them

43 days
median duration
6,962 ha
median area
38 %
went past 10,000 ha
2.8 mm
rain at the end (median; 25 of 26 had it)

It stayed below its twins: 1,306 ha against a median of 6,962 ha. It lasted 10 days, against 43 days.

In 1 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

10.2 mmfirst rain
25 Aug5 days after it ended
68km/h · max. gust

It was considered over on 20 Aug, and on 25 Aug 10.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 25 of 26, with a median of 2.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Aug 2018
After · 27 Aug 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Canada

Frequently asked questions

How long did the Northern Rockies fire last?
It burned between 11 August 2018 and 20 August 2018: 10 days, according to the dates recorded by Canada’s CWFIS and the heat detections seen by satellite.
How much area did it burn?
The official perimeter mapped by Canada’s CWFIS (Natural Resources Canada) is 1,306 hectares (13.1 km²). Other tallies, such as those of provincial agencies, may give slightly different figures.
Which census subdivisions burned?
The fire entered 2 census subdivisions: Northern Rockies (1,336 ha, 0.0 %); Region 4, Unorganized (2 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 26.4 °C, humidity dropped to 21 % and gusts hit 68 km/h. The fire danger index (FWI) reached 39, class Very high.
Where does this data come from?
From the official burnt perimeter of Canada’s CWFIS (NBAC, Natural Resources Canada) or, for the current season and until NBAC publishes it, the one rebuilt by GWIS (Copernicus); from NASA FIRMS VIIRS hotspots; and from the administrative boundaries of Canada. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 26. Their median duration was 43 days and their median area 6,962 ha; 38 % went past 10,000 ha. In 1 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 21 August 2018 → 20 August 2018.
  2. Start date: 26 July 2018 → 11 August 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: NBAC (Natural Resources Canada), official.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official: it comes from the National Burned Area Composite (NBAC) of the Canadian Wildland Fire Information System (CWFIS), Natural Resources Canada, which maps it on satellite imagery and publishes it under the Open Government Licence – Canada. Until NBAC publishes the current season, this year’s fires carry the perimeter rebuilt from heat detections by GWIS (Copernicus, CC BY 4.0), which is approximate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Census subdivision boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per census subdivision is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.