Skip to content
worldfires
MW · Malawi · –

Nkhotakota fire, 9 October 2016 Nkhotakota, Nkhata Bay

Out · last detection 26 Oct 2016, 11:38 UTC

The fire started on 9 October 2016 in Nkhotakota, Malawi, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,322 hectares from heat detections, spread across 2 municipalities.

It is the 84th largest in Central Region since 2016 (of 161 with a page). Number 45 in Malawi in 2016, of 77.

Burnt area
1,322ha
GWIS perimeter (Copernicus)
Duration
17days
9 Oct 2016 – 25 Oct 2016
Municipalities hit
2
districts
Started on
9 Oct
2016
Heat detections
65
in a single hotspot: 34 MW
Danger at start
19
Moderate · FWI index
Average daily power
86MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Oct25 Oct
26 Oct 2016

How it evolved, day by day

10 Oct 2016 · 1 MW · 1 13 Oct 2016 · 9 MW · 3 15 Oct 2016 · 1 MW · 1 16 Oct 2016 · 26 MW · 7 17 Oct 2016 · 704 MW · 43 18 Oct 2016 · 15 MW · 2 20 Oct 2016 · 4 MW · 2 25 Oct 2016 · 6 MW · 4 26 Oct 2016 · 10 MW · 2
10 Oct 15 Oct 17 Oct 20 Oct 26 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

29°high
45km/h · peak gust
35%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.8% of the area of London (13 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Nkhotakota where it started
    1,322 ha
    0.3 %
  2. 5 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.57 ha
Residents≈ 60

Inside the perimeter there were about 0.57 hectares of built-up land and about 60 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Oct 27.6 °C 42 % 39 km/h 0.0 mm Moderate 19
10 Oct 26.0 °C 45 % 38 km/h 0.0 mm Moderate 19
11 Oct 26.6 °C 48 % 40 km/h 0.0 mm Moderate 19
12 Oct 27.4 °C 35 % 35 km/h 0.0 mm Moderate 21
13 Oct 27.7 °C 39 % 34 km/h 0.0 mm Moderate 21
14 Oct 27.8 °C 42 % 38 km/h 0.0 mm High 23
15 Oct 27.0 °C 45 % 37 km/h 0.0 mm High 22
16 Oct 27.3 °C 39 % 33 km/h 0.0 mm High 22
17 Oct 28.0 °C 41 % 34 km/h 0.0 mm High 23
18 Oct 27.5 °C 40 % 38 km/h 0.0 mm High 24
19 Oct 26.7 °C 41 % 40 km/h 0.0 mm High 24
20 Oct 27.1 °C 42 % 45 km/h 0.0 mm High 26
21 Oct 28.0 °C 41 % 37 km/h 0.0 mm High 25
22 Oct 28.3 °C 36 % 32 km/h 0.0 mm High 24
23 Oct 28.3 °C 37 % 33 km/h 0.0 mm High 24
24 Oct 29.1 °C 38 % 35 km/h 0.0 mm High 25
25 Oct 27.9 °C 41 % 34 km/h 0.0 mm High 26
26 Oct after 27.7 °C 45 % 34 km/h 0.0 mm High 25
27 Oct after 28.3 °C 38 % 37 km/h 0.0 mm High 26
28 Oct after 27.9 °C 46 % 37 km/h 0.7 mm Moderate 20
29 Oct after 28.1 °C 48 % 35 km/h 0.0 mm Moderate 19
30 Oct after 27.5 °C 45 % 32 km/h 0.6 mm Moderate 19
31 Oct after 28.6 °C 53 % 39 km/h 0.9 mm Moderate 14
1 Nov after 29.5 °C 47 % 26 km/h 0.2 mm Moderate 18
2 Nov after 30.2 °C 40 % 28 km/h 0.0 mm High 23
3 Nov after 29.5 °C 43 % 34 km/h 0.0 mm High 24
4 Nov after 27.9 °C 40 % 37 km/h 0.0 mm High 26

Its twins: fires that started in the same weather

It started with an FWI of 18.7, a minimum humidity of 42% and 3 days without rain. Fires in the area that started in weather like this since 2016: 20.

FWI at the start 18.7
Minimum humidity 42 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Nkhata Bay fire, October 2023
8,368 ha 26 days FWI 18.4 Min. humidity 44 % 10 km away, in 2023

First rain (1 mm or more) after it ended: 24.9 mm on 2 Nov.

What happened to them

14 days
median duration
1,423 ha
median area
100 %
went past 1,000 ha
2.5 mm
rain at the end (median; 19 of 20 had it)

It burned an area similar to its twins (1,322 ha against a median of 1,423 ha) and lasted 17 days, against 14 days.

In 1 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
45km/h · max. gust

It was considered over on 25 Oct, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 19 of 20, with a median of 2.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Oct 2016
After · 1 Nov 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 65Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Malawi

Frequently asked questions

How long did the Nkhotakota fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 9 October 2016 to 25 October 2016 (17 days). The perimeter dates it from 16 October 2016 to 18 October 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,322 hectares (13.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Nkhotakota (1,322 ha, 0.3 %); Nkhata Bay (5 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 29.1 °C, humidity dropped to 35 % and gusts hit 45 km/h. The fire danger index (FWI) reached 26, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Malawi (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 20. Their median duration was 14 days and their median area 1,423 ha; 100 % went past 1,000 ha. In 1 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 18 October 2016 → 25 October 2016.
  2. Start date: 16 October 2016 → 9 October 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 October 2016 to 18 October 2016. 65 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.