Skip to content
worldfires
MW · Malawi · –

Nkhotakota fire, 13 October 2016 Mzimba, Nkhotakota

Out · last detection 28 Oct 2016, 11:01 UTC

The fire started on 13 October 2016 in Nkhotakota, Malawi, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,103 hectares from heat detections, spread across 2 municipalities.

It is the 40th largest in Central Region since 2016 (of 161 with a page). Number 18 in Malawi in 2016, of 77.

Burnt area
2,103ha
GWIS perimeter (Copernicus)
Duration
16days
13 Oct 2016 – 28 Oct 2016
Municipalities hit
2
districts
Started on
13 Oct
2016
Heat detections
86
in a single hotspot: 49 MW
Danger at start
49
Very high · FWI index
Average daily power
57MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Oct28 Oct
28 Oct 2016

How it evolved, day by day

13 Oct 2016 · 82 MW · 7 14 Oct 2016 · 7 MW · 2 16 Oct 2016 · 8 MW · 2 19 Oct 2016 · 0 MW · 1 20 Oct 2016 · 70 MW · 8 21 Oct 2016 · 32 MW · 6 22 Oct 2016 · 207 MW · 25 23 Oct 2016 · 277 MW · 20 24 Oct 2016 · 6 MW · 3 25 Oct 2016 · 9 MW · 2 26 Oct 2016 · 23 MW · 7 27 Oct 2016 · 12 MW · 2 28 Oct 2016 · 2 MW · 1
13 Oct 19 Oct 23 Oct 28 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
60km/h · peak gust
28%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started. Rain came after the fire: 2.0 mm on 30 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.3% of the area of London (21 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 1,931 ha
    0.2 %
  2. Nkhotakota where it started
    189 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.68 ha
Residents≈ 100

Inside the perimeter there were about 0.68 hectares of built-up land and about 100 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 13 % of the area in Malawi

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Oct 27.9 °C 32 % 55 km/h 0.0 mm Very high 49
14 Oct 28.0 °C 32 % 57 km/h 0.0 mm Very high 48
15 Oct 26.6 °C 38 % 55 km/h 0.0 mm Very high 44
16 Oct 27.5 °C 31 % 48 km/h 0.0 mm Very high 39
17 Oct 29.6 °C 33 % 45 km/h 0.0 mm Very high 42
18 Oct 27.0 °C 36 % 55 km/h 0.0 mm Very high 47
19 Oct 25.7 °C 35 % 60 km/h 0.0 mm Extreme 52
20 Oct 26.9 °C 35 % 59 km/h 0.0 mm Extreme 50
21 Oct 28.0 °C 35 % 55 km/h 0.0 mm Very high 48
22 Oct 28.7 °C 28 % 50 km/h 0.0 mm Very high 48
23 Oct 29.5 °C 30 % 50 km/h 0.0 mm Very high 47
24 Oct 29.6 °C 31 % 50 km/h 0.0 mm Very high 48
25 Oct 29.1 °C 35 % 48 km/h 0.0 mm Very high 48
26 Oct 27.4 °C 40 % 51 km/h 0.0 mm Very high 47
27 Oct 28.2 °C 33 % 55 km/h 0.0 mm Extreme 51
28 Oct 28.5 °C 38 % 51 km/h 0.0 mm Very high 48
29 Oct after 28.6 °C 34 % 47 km/h 0.5 mm Very high 46
30 Oct after 26.4 °C 40 % 41 km/h 2.0 mm Low 9

Its twins: fires that started in the same weather

It started with an FWI of 48.9, a minimum humidity of 32% and 8 days without rain. Fires in the area that started in weather like this since 2016: 36.

FWI at the start 48.9
Minimum humidity 32 %
Days without rain 8
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Nkhata Bay fire, October 2022
1,330 ha 24 days FWI 45.6 Min. humidity 31 % 30 km away, in 2022

First rain (1 mm or more) after it ended: 8.7 mm on 11 Nov.

What happened to them

10 days
median duration
1,424 ha
median area
100 %
went past 1,000 ha
3.0 mm
rain at the end (median; 23 of 36 had it)

It burned an area similar to its twins (2,103 ha against a median of 1,424 ha) and lasted 16 days, against 10 days.

In 13 of 36, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.0 mmfirst rain
30 Oct2 days after it ended
60km/h · max. gust

It was considered over on 28 Oct, and on 30 Oct 2.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 23 of 36, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Oct 2016
After · 4 Nov 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 86Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Malawi

Frequently asked questions

How long did the Nkhotakota fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 13 October 2016 to 28 October 2016 (16 days). The perimeter dates it from 20 October 2016 to 25 October 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,103 hectares (21.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Mzimba (1,931 ha, 0.2 %); Nkhotakota (189 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 29.6 °C, humidity dropped to 28 % and gusts hit 60 km/h. The fire danger index (FWI) reached 52, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Malawi (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 36. Their median duration was 10 days and their median area 1,424 ha; 100 % went past 1,000 ha. In 13 of 36, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 3 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Mzimba → Nkhotakota.
  2. Last day with fire: 25 October 2016 → 28 October 2016.
  3. Start date: 20 October 2016 → 13 October 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 October 2016 to 25 October 2016. 86 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.