Skip to content
worldfires
RU · Russia · –

Nizhneudinsky Rayon fire, September 2016 Nizhneudinsky Rayon

Out · last detection 28 Sept 2016, 21:08 UTC

The fire started on 15 September 2016 in Nizhneudinsky Rayon, Russia, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,506 hectares from heat detections, spread across a single municipality.

It is the 214th largest in Irkutsk Oblast since 2016 (of 421 with a page). Number 369 in Russia in 2016, of 692.

Compare with…
Burnt area
5,506ha
GWIS perimeter (Copernicus)
Duration
14days
15 Sept 2016 – 28 Sept 2016
Municipalities hit
1
districts
Started on
15 Sept
2016
Heat detections
915
in a single hotspot: 123 MW
Danger at start
12
Moderate · FWI index
Average daily power
616MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Sept28 Sept
28 Sept 2016

How it evolved, day by day

15 Sept 2016 · 15 MW · 5 16 Sept 2016 · 121 MW · 19 17 Sept 2016 · 2,321 MW · 102 18 Sept 2016 · 952 MW · 94 19 Sept 2016 · 851 MW · 76 20 Sept 2016 · 302 MW · 51 21 Sept 2016 · 323 MW · 34 22 Sept 2016 · 119 MW · 29 23 Sept 2016 · 218 MW · 45 24 Sept 2016 · 437 MW · 58 25 Sept 2016 · 276 MW · 54 26 Sept 2016 · 1,021 MW · 112 27 Sept 2016 · 1,035 MW · 138 28 Sept 2016 · 631 MW · 98
17 Sept 21 Sept 24 Sept 27 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

25°high
52km/h · peak gust
28%lowest humidity

It had gone 10 days without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 29 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3.5% of the area of London (55 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Nizhneudinsky Rayon where it started
    5,623 ha reached on 15 Sept
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Sept 20.8 °C 29 % 35 km/h 0.0 mm Moderate 12
16 Sept 21.8 °C 33 % 33 km/h 0.0 mm Low 11
17 Sept 22.7 °C 31 % 52 km/h 0.0 mm Moderate 16
18 Sept 25.2 °C 32 % 39 km/h 0.0 mm Moderate 13
19 Sept 22.4 °C 35 % 30 km/h 0.0 mm Low 10
20 Sept 19.3 °C 42 % 30 km/h 0.0 mm Low 11
21 Sept 19.2 °C 38 % 29 km/h 0.0 mm Low 10
22 Sept 17.7 °C 36 % 21 km/h 0.0 mm Low 9
23 Sept 13.8 °C 37 % 30 km/h 0.0 mm Low 10
24 Sept 12.9 °C 28 % 20 km/h 0.0 mm Low 8
25 Sept 10.5 °C 31 % 26 km/h 0.0 mm Low 10
26 Sept 12.0 °C 29 % 19 km/h 0.0 mm Low 9
27 Sept 15.8 °C 28 % 27 km/h 0.0 mm Low 11
28 Sept 15.1 °C 38 % 36 km/h 0.0 mm Moderate 11
29 Sept after 9.9 °C 67 % 44 km/h 1.0 mm Moderate 12

Its twins: fires that started in the same weather

It started with an FWI of 12.2, a minimum humidity of 29% and 10 days without rain. Fires in the area that started in weather like this since 2016: 15.

FWI at the start 12.2
Minimum humidity 29 %
Days without rain 10
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ust-Ilimsky fire, May 2022
3,208 ha 14 days FWI 12.2 Min. humidity 30 % 244 km away, in 2022

First rain (1 mm or more) after it ended: 10.5 mm on 31 May.

What happened to them

8 days
median duration
4,507 ha
median area
13 %
went past 10,000 ha
5.6 mm
rain at the end (median; 15 of 15 had it)

It burned an area similar to its twins (5,506 ha against a median of 4,507 ha) and lasted 14 days, against 8 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 5.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.0 mmfirst rain
29 Septthe day after it ended
52km/h · max. gust

It was considered over on 28 Sept, and on 29 Sept 1.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 15, with a median of 5.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Sept 2016
After · 5 Oct 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 915Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Frequently asked questions

How long did the Nizhneudinsky Rayon fire last?
GWIS (Copernicus) dates it between 15 September 2016 and 28 September 2016: 14 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,506 hectares (55.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Nizhneudinsky Rayon (5,623 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 25.2 °C, humidity dropped to 28 % and gusts hit 52 km/h. The fire danger index (FWI) reached 16, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 15. Their median duration was 8 days and their median area 4,507 ha; 13 % went past 10,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 5.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 915 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.