Skip to content
worldfires
ME · Montenegro · –

Nikšić Municipality fire, 23 August 2026 Nikšić Municipality

Out · last detection

The fire started on in Nikšić Municipality, Montenegro, and satellites saw it burning for 5 days. Copernicus mapped a burnt perimeter of 274 hectares from satellite imagery, spread across a single municipality.

We are reviewing this page: some of its data look inconsistent (the place, the dates or the area), so treat them with caution.

Burnt area
274ha
Copernicus perimeter
Duration
≈ 5days
23 Aug 2026 – 27 Aug 2026
Municipalities hit
1
municipalities
Started on
23 Aug
2026
Heat detections
25
in a single hotspot: 35 MW
Danger at start
26
High · FWI index
Average daily power
28MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 Aug27 Aug
27 Aug 2026

How it evolved, day by day

23 Aug 2026 · 1 MW · 1 24 Aug 2026 · 72 MW · 6 25 Aug 2026 · 46 MW · 9 26 Aug 2026 · 9 MW · 6 27 Aug 2026 · 14 MW · 3
23 Aug 24 Aug 25 Aug 26 Aug 27 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
51km/h · peak gust
26%lowest humidity

It had gone 14 days without rain (1 mm or more) when it started. Rain came after the fire: 2.0 mm on 28 Aug.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 16 ha in 2017, 473 ha in 2020.

What happened to each town

  1. Nikšić Municipality where it started
    503 ha reached on 23 Aug
    0.2 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Broadleaved forest57 %
  • Other natural land22 %
  • Scrub and transitional woodland20 %
  • Agricultural areas1.4 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Aug 30.6 °C 37 % 24 km/h 0.4 mm High 26
24 Aug 31.3 °C 26 % 36 km/h 0.2 mm High 37
25 Aug 29.1 °C 40 % 51 km/h 0.4 mm High 37
26 Aug 30.9 °C 30 % 31 km/h 0.0 mm High 30
27 Aug 33.3 °C 27 % 40 km/h 0.0 mm Very high 42
28 Aug after 34.5 °C 29 % 53 km/h 2.0 mm Very high 49

Its twins: fires that started in the same weather

It started with an FWI of 26.1, a minimum humidity of 37% and 14 days without rain. Fires in the area that started in weather like this since 2016: 31.

FWI at the start 26.1
Minimum humidity 37 %
Days without rain 14
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Trebinje fire, August 2017
1,211 ha 20 days FWI 25.8 Min. humidity 36 % 64 km away, in 2017

First rain (1 mm or more) after it ended: 5.5 mm on 2 Sept.

What happened to them

5 days
median duration
366 ha
median area
23 %
went past 1,000 ha
4.2 mm
rain at the end (median; 26 of 31 had it)

It burned an area similar to its twins (274 ha against a median of 366 ha) and lasted 5 days, against 5 days.

In 5 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.0 mmfirst rain
28 Augthe day after it ended
51km/h · max. gust

It was considered over on 27 Aug, and on 28 Aug 2.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 26 of 31, with a median of 4.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 Aug 2026
After · 3 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 29 August 2026 the air beside the fire reached 23 µg/m³ of PM2.5. That day averaged 20: 1.3 times the WHO daily guideline (15).

PM2.5 peak23 µg/m³
Days over the guideline2 days
PM1065 µg/m³
Optical depth0.75
21 Aug23 Aug25 Aug27 Aug29 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 25Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Montenegro

Frequently asked questions

How long did the Nikšić Municipality fire last?
The official perimeter only gives the start date (23 August 2026). The end comes from the heat detections inside the perimeter: it burned until 27 August 2026 (5 days from 23 August 2026), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 274 hectares (2.7 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered Nikšić Municipality (503 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 33.3 °C, humidity dropped to 26 % and gusts hit 51 km/h. The fire danger index (FWI) reached 42, class Very high.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Montenegro (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 31. Their median duration was 5 days and their median area 366 ha; 23 % went past 1,000 ha. In 5 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 123 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 503 → 274 ha.
  2. Last day with fire: 23 August 2026 → 27 August 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 123.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery; 2 polygons grouped in this page.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 25 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM1 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.