Skip to content
worldfires
CM · Cameroon · –

Ngambé-Tikar fire, 19 February 2020 Ngambé-Tikar, Yoko

Out · last detection 3 Mar 2020, 12:33 UTC

The fire started on 19 February 2020 in Ngambé-Tikar, Cameroon, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,290 hectares from heat detections, spread across 2 municipalities.

It is the 118th largest in Centre since 2016 (of 178 with a page). Number 146 in Cameroon in 2020, of 268.

Burnt area
1,290ha
GWIS perimeter (Copernicus)
Duration
13days
19 Feb 2020 – 2 Mar 2020
Municipalities hit
2
communes
Started on
19 Feb
2020
Heat detections
66
in a single hotspot: 67 MW
Danger at start
56
Extreme · FWI index
Average daily power
77MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 Feb2 Mar
3 Mar 2020

How it evolved, day by day

20 Feb 2020 · 136 MW · 8 21 Feb 2020 · 335 MW · 15 22 Feb 2020 · 44 MW · 4 23 Feb 2020 · 47 MW · 6 24 Feb 2020 · 118 MW · 9 25 Feb 2020 · 123 MW · 4 26 Feb 2020 · 4 MW · 3 27 Feb 2020 · 136 MW · 6 28 Feb 2020 · 23 MW · 3 29 Feb 2020 · 1 MW · 1 1 Mar 2020 · 5 MW · 3 2 Mar 2020 · 4 MW · 1 3 Mar 2020 · 27 MW · 3
21 Feb 26 Feb 29 Feb 3 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
36km/h · peak gust
11%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 1.1 mm on 3 Mar.

This area had burned before

93% of the perimeter overlaps earlier fires recorded since 2016: 944 ha in 2017, 1,019 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 1,200 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 0.8% of the area of London (13 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Ngambé-Tikar where it started
    1,240 ha reached on 20 Feb
    0.2 %
  2. 59 ha reached on 20 Feb
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.16 ha
Residents< 20

Inside the perimeter there were about 0.16 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 51 % of the area in Cameroon Very dry air: 32 % of the area in Cameroon 60 days without rain: 50 % of the area in Cameroon

Day High Min. humidity Peak gust Rain Danger (FWI)
19 Feb 35.0 °C 13 % 32 km/h 0.0 mm Extreme 56
20 Feb 35.3 °C 16 % 25 km/h 0.2 mm Very high 48
21 Feb 35.4 °C 14 % 36 km/h 0.0 mm Extreme 62
22 Feb 37.1 °C 15 % 36 km/h 0.0 mm Extreme 62
23 Feb 36.5 °C 12 % 30 km/h 0.0 mm Extreme 56
24 Feb 35.7 °C 11 % 30 km/h 0.0 mm Extreme 60
25 Feb 34.2 °C 14 % 24 km/h 0.0 mm Extreme 56
26 Feb 34.5 °C 16 % 28 km/h 0.0 mm Extreme 56
27 Feb 34.9 °C 28 % 27 km/h 0.0 mm Very high 41
28 Feb 36.4 °C 13 % 31 km/h 0.0 mm Extreme 51
29 Feb 37.4 °C 13 % 33 km/h 0.0 mm Extreme 50
1 Mar 35.2 °C 24 % 33 km/h 0.0 mm Very high 42
2 Mar 33.2 °C 40 % 31 km/h 2.1 mm High 31
3 Mar after 34.5 °C 30 % 27 km/h 1.1 mm Low 10

Its twins: fires that started in the same weather

It started with an FWI of 55.5, a minimum humidity of 13% and more than two months without rain. Fires in the area that started in weather like this since 2016: 34.

FWI at the start 55.5
Minimum humidity 13 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Yoko fire, February 2021
2,436 ha 3 days FWI 56.6 Min. humidity 13 % 81 km away, in 2021

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

13 days
median duration
1,458 ha
median area
100 %
went past 1,000 ha
6.7 mm
rain at the end (median; 18 of 34 had it)

It burned an area similar to its twins (1,290 ha against a median of 1,458 ha) and lasted 13 days, against 13 days.

In 16 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.1 mmfirst rain
3 Marthe day after it ended
36km/h · max. gust

It was considered over on 2 Mar, and on 3 Mar 1.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 18 of 34, with a median of 6.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 Feb 2020
After · 9 Mar 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 66Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Cameroon

Frequently asked questions

How long did the Ngambé-Tikar fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 19 February 2020 to 2 March 2020 (13 days). The perimeter dates it from 20 February 2020 to 24 February 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,290 hectares (12.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Ngambé-Tikar (1,240 ha, 0.2 %); Yoko (59 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 37.4 °C, humidity dropped to 11 % and gusts hit 36 km/h. The fire danger index (FWI) reached 62, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Cameroon (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 34. Their median duration was 13 days and their median area 1,458 ha; 100 % went past 1,000 ha. In 16 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 February 2020 → 2 March 2020.
  2. Start date: 20 February 2020 → 19 February 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 February 2020 to 24 February 2020. 66 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.