Skip to content
worldfires
AU · Australia · –

Ngaanyatjarraku fire, October 2017 Ngaanyatjarraku

Out · last detection 23 Oct 2017, 05:02 UTC

The fire started on 18 October 2017 in Ngaanyatjarraku, Australia, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,475 hectares from heat detections, spread across a single municipality.

It is the 387th largest in Western Australia since 2016 (of 427 with a page). Number 105 in Australia in 2017, of 116.

Compare with…

Suggestions: Laverton · 2018Ngaanyatjarraku · 2018

Burnt area
5,475ha
GWIS perimeter (Copernicus)
Duration
6days
18 Oct 2017 – 23 Oct 2017
Municipalities hit
1
local government areas
Started on
18 Oct
2017
Heat detections
194
in a single hotspot: 31 MW
Danger at start
57
Extreme · FWI index
Average daily power
182MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 18 Oct23 Oct
23 Oct 2017

How it evolved, day by day

18 Oct 2017 · 128 MW · 14 19 Oct 2017 · 424 MW · 65 20 Oct 2017 · 172 MW · 58 21 Oct 2017 · 308 MW · 40 22 Oct 2017 · 9 MW · 10 23 Oct 2017 · 53 MW · 7
19 Oct 22 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
69km/h · peak gust
8%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3.5% of the area of London (55 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Ngaanyatjarraku where it started
    5,554 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
18 Oct 33.8 °C 16 % 51 km/h 0.0 mm Extreme 57
19 Oct 29.9 °C 22 % 68 km/h 0.0 mm Very extreme 87
20 Oct 32.5 °C 21 % 56 km/h 0.0 mm Extreme 64
21 Oct 35.3 °C 16 % 48 km/h 0.0 mm Extreme 52
22 Oct 33.0 °C 8 % 43 km/h 0.0 mm High 38
23 Oct 36.4 °C 10 % 69 km/h 0.0 mm Very extreme 95
24 Oct after 36.5 °C 14 % 35 km/h 0.0 mm Very high 41
25 Oct after 37.3 °C 9 % 48 km/h 0.0 mm Extreme 68
26 Oct after 37.4 °C 8 % 43 km/h 0.0 mm Extreme 67
27 Oct after 29.4 °C 12 % 52 km/h 0.0 mm Extreme 60
28 Oct after 31.7 °C 7 % 32 km/h 0.0 mm Extreme 55
29 Oct after 34.1 °C 10 % 46 km/h 0.0 mm Very extreme 81
30 Oct after 29.8 °C 11 % 54 km/h 0.0 mm Very extreme 82
31 Oct after 32.8 °C 9 % 41 km/h 0.0 mm Extreme 60
1 Nov after 34.9 °C 9 % 35 km/h 0.0 mm Extreme 60
2 Nov after 35.9 °C 7 % 34 km/h 0.0 mm Extreme 51

Its twins: fires that started in the same weather

It started with an FWI of 57.0, a minimum humidity of 16% and 2 days without rain. Fires in the area that started in weather like this since 2017: 19.

FWI at the start 57.0
Minimum humidity 16 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Laverton fire, October 2018
11,266 ha 12 days FWI 56.3 Min. humidity 15 % 203 km away, in 2018

First rain (1 mm or more) after it ended: 4.1 mm on 26 Oct.

What happened to them

7 days
median duration
9,501 ha
median area
47 %
went past 10,000 ha
3.4 mm
rain at the end (median; 10 of 19 had it)

It stayed below its twins: 5,475 ha against a median of 9,501 ha. It lasted 6 days, against 7 days.

In 9 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
69km/h · max. gust

It was considered over on 23 Oct, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 10 of 19, with a median of 3.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 11 Oct 2017
After · 30 Oct 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 194Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Frequently asked questions

How long did the Ngaanyatjarraku fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 18 October 2017 to 23 October 2017 (6 days). The perimeter dates it from 18 October 2017 to 22 October 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,475 hectares (54.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Ngaanyatjarraku (5,554 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 36.4 °C, humidity dropped to 8 % and gusts hit 69 km/h. The fire danger index (FWI) reached 95, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2017 with a similar FWI, humidity and dry spell: 19. Their median duration was 7 days and their median area 9,501 ha; 47 % went past 10,000 ha. In 9 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 22 October 2017 → 23 October 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 18 October 2017 to 22 October 2017. 194 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.