Skip to content
worldfires
AU · Australia · –

Napranum fire, August 2019 Napranum, Cook

Out · last detection 7 Sept 2019, 04:39 UTC

The fire started on 31 August 2019 in Napranum, Australia, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,309 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Compare with…
Burnt area
5,309ha
GWIS perimeter (Copernicus)
Duration
8days
31 Aug 2019 – 7 Sept 2019
Municipalities hit
2
local government areas
Started on
31 Aug
2019
Heat detections
202
in a single hotspot: 38 MW
Danger at start
38
Very high · FWI index
Average daily power
159MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 31 Aug7 Sept
7 Sept 2019

How it evolved, day by day

31 Aug 2019 · 305 MW · 39 1 Sept 2019 · 135 MW · 28 2 Sept 2019 · 416 MW · 60 3 Sept 2019 · 299 MW · 51 4 Sept 2019 · 65 MW · 11 5 Sept 2019 · 14 MW · 4 6 Sept 2019 · 14 MW · 4 7 Sept 2019 · 25 MW · 5
31 Aug 2 Sept 4 Sept 6 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
50km/h · peak gust
28%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

64% of the perimeter overlaps earlier fires recorded since 2016: 1,018 ha in 2016, 2,559 ha in 2017, 1,183 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 3,390 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.4% of the area of London (53 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Napranum where it started
    5,281 ha
    2.6 %
  2. 55 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
31 Aug 32.7 °C 30 % 34 km/h 0.0 mm Very high 38
1 Sept 31.9 °C 28 % 45 km/h 0.0 mm Very high 47
2 Sept 31.5 °C 30 % 50 km/h 0.0 mm Extreme 51
3 Sept 30.5 °C 31 % 49 km/h 0.0 mm Extreme 53
4 Sept 30.8 °C 33 % 45 km/h 0.0 mm Very high 48
5 Sept 30.2 °C 32 % 44 km/h 0.0 mm Very high 47
6 Sept 31.1 °C 31 % 42 km/h 0.0 mm Very high 43
7 Sept 32.3 °C 29 % 35 km/h 0.0 mm High 36
8 Sept after 33.2 °C 23 % 22 km/h 0.0 mm High 33
9 Sept after 32.6 °C 27 % 30 km/h 0.0 mm Very high 39
10 Sept after 32.3 °C 19 % 46 km/h 0.0 mm Extreme 60
11 Sept after 29.8 °C 30 % 55 km/h 0.0 mm Extreme 68
12 Sept after 29.3 °C 41 % 51 km/h 0.0 mm Extreme 54
13 Sept after 30.8 °C 34 % 52 km/h 0.0 mm Extreme 51
14 Sept after 31.3 °C 34 % 49 km/h 0.0 mm Extreme 52
15 Sept after 31.9 °C 32 % 50 km/h 0.0 mm Extreme 54
16 Sept after 30.2 °C 40 % 51 km/h 0.0 mm Extreme 51
17 Sept after 32.9 °C 29 % 40 km/h 0.0 mm Very high 42

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Aug 2019
After · 14 Sept 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 202Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Napranum fire last?
GWIS (Copernicus) dates it between 31 August 2019 and 7 September 2019: 8 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,309 hectares (53.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Napranum (5,281 ha, 2.6 %); Cook (55 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 32.7 °C, humidity dropped to 28 % and gusts hit 50 km/h. The fire danger index (FWI) reached 53, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Cook → Napranum.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 202 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.