Skip to content
worldfires
CF · Central African Republic · –

Nana-Outa fire, February 2022 Nana-Outa

Out · last detection 9 Feb 2022, 12:59 UTC

The fire started on 3 February 2022 in Nana-Outa, Central African Republic, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,905 hectares from heat detections, spread across a single municipality.

Number 58 in Central African Republic in 2022, of 93.

Compare with…
Burnt area
6,905ha
GWIS perimeter (Copernicus)
Duration
7days
3 Feb 2022 – 9 Feb 2022
Municipalities hit
1
sub-prefectures
Started on
3 Feb
2022
Heat detections
174
in a single hotspot: 0 MW
Danger at start
52
Extreme · FWI index
Average daily power
255MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Feb9 Feb
9 Feb 2022

How it evolved, day by day

3 Feb 2022 · 40 MW · 5 4 Feb 2022 · 312 MW · 40 5 Feb 2022 · 637 MW · 31 6 Feb 2022 · 176 MW · 31 7 Feb 2022 · 218 MW · 19 8 Feb 2022 · 314 MW · 31 9 Feb 2022 · 87 MW · 17
3 Feb 5 Feb 7 Feb 9 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
34km/h · peak gust
10%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

32% of the perimeter overlaps earlier fires recorded since 2016: 1,188 ha in 2016, 985 ha in 2019, 679 ha in 2020, 447 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 2,235 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.4% of the area of London (69 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Nana-Outa where it started
    6,944 ha
    0.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Very dry air: 49 % of the area in Central African Republic 60 days without rain: 30 % of the area in Central African Republic

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Feb 34.8 °C 13 % 33 km/h 0.0 mm Extreme 52
4 Feb 35.3 °C 10 % 34 km/h 0.0 mm Extreme 56
5 Feb 35.5 °C 15 % 26 km/h 0.0 mm Extreme 52
6 Feb 36.2 °C 14 % 25 km/h 0.0 mm Extreme 52
7 Feb 37.1 °C 12 % 32 km/h 0.0 mm Extreme 53
8 Feb 37.6 °C 13 % 29 km/h 0.0 mm Extreme 52
9 Feb 37.4 °C 13 % 26 km/h 0.0 mm Extreme 53
10 Feb after 38.4 °C 11 % 30 km/h 0.0 mm Extreme 55
11 Feb after 38.4 °C 13 % 31 km/h 0.0 mm Extreme 54
12 Feb after 37.9 °C 16 % 28 km/h 0.0 mm Extreme 52
13 Feb after 37.1 °C 13 % 23 km/h 0.0 mm Extreme 52
14 Feb after 38.6 °C 12 % 31 km/h 0.0 mm Extreme 54
15 Feb after 39.9 °C 10 % 31 km/h 0.0 mm Extreme 53
16 Feb after 38.9 °C 15 % 21 km/h 0.0 mm Extreme 50
17 Feb after 39.6 °C 12 % 19 km/h 0.0 mm Extreme 53
18 Feb after 39.6 °C 12 % 22 km/h 0.0 mm Extreme 55
19 Feb after 38.6 °C 11 % 29 km/h 0.0 mm Extreme 56

Its twins: fires that started in the same weather

It started with an FWI of 52.4, a minimum humidity of 13% and more than two months without rain. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 52.4
Minimum humidity 13 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Grande Sido fire, February 2021
2,180 ha 6 days FWI 52.9 Min. humidity 14 % 102 km away, in 2021

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

11 days
median duration
6,462 ha
median area
24 %
went past 10,000 ha
1.0 mm
rain at the end (median; 1 of 17 had it)

It burned an area similar to its twins (6,905 ha against a median of 6,462 ha) and lasted 7 days, against 11 days.

In 16 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
34km/h · max. gust

It was considered over on 9 Feb, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 1 of 17, with a median of 1.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 Jan 2022
After · 16 Feb 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Central African Republic

Frequently asked questions

How long did the Nana-Outa fire last?
GWIS (Copernicus) dates it between 3 February 2022 and 9 February 2022: 7 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,905 hectares (69.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Nana-Outa (6,944 ha, 0.9 %).
What was the weather like?
During the fire the temperature reached 37.6 °C, humidity dropped to 10 % and gusts hit 34 km/h. The fire danger index (FWI) reached 56, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Central African Republic (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 11 days and their median area 6,462 ha; 24 % went past 10,000 ha. In 16 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 4 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 10 February 2022 → 9 February 2022.
  2. Start date: 31 January 2022 → 3 February 2022.
  3. Last day with fire: 9 February 2022 → 10 February 2022.
  4. Start date: 3 February 2022 → 31 January 2022.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.