Nagero fire, 5 December 2016 Nagero
The fire started on 5 December 2016 in Nagero, South Sudan, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 13,958 hectares from heat detections, spread across a single municipality.
It is the 91th largest in Western Equatoria since 2016 (of 359 with a page). Number 48 in South Sudan in 2016, of 244.
Compare with…
Suggestions: Nagero · 2023Nagero · 2025Nzara · 2016Nagero · 2020
- Burnt area
- 13,958ha
- GWIS perimeter (Copernicus)
- Duration
- 16days
- 5 Dec 2016 – 20 Dec 2016
- Municipalities hit
- 1
- counties
- Started on
- 5 Dec
- 2016
- Heat detections
- 457
- in a single hotspot: 154 MW
- Danger at start
- 39
- Very high · FWI index
- Average daily power
- 328MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 3 days without rain (1 mm or more) when it started.
This area had burned before
No earlier perimeters overlap this fire since 2016, when the satellite record begins.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Nagero where it started14,056 ha reached on 5 Dec1.5 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2015Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 5 Dec | 36.4 °C | 21 % | 38 km/h | 0.0 mm | Very high 39 |
| 6 Dec | 36.2 °C | 19 % | 27 km/h | 0.0 mm | High 36 |
| 7 Dec | 35.6 °C | 17 % | 28 km/h | 0.0 mm | High 37 |
| 8 Dec | 36.5 °C | 15 % | 32 km/h | 0.0 mm | Very high 42 |
| 9 Dec | 36.3 °C | 16 % | 32 km/h | 0.0 mm | Very high 44 |
| 10 Dec | 36.7 °C | 18 % | 34 km/h | 0.0 mm | Very high 45 |
| 11 Dec | 36.6 °C | 17 % | 32 km/h | 0.0 mm | Very high 44 |
| 12 Dec | 36.2 °C | 20 % | 34 km/h | 0.0 mm | Very high 45 |
| 13 Dec | 36.0 °C | 21 % | 36 km/h | 0.0 mm | Very high 46 |
| 14 Dec | 36.1 °C | 17 % | 34 km/h | 0.0 mm | Very high 46 |
| 15 Dec | 34.5 °C | 13 % | 22 km/h | 0.0 mm | Very high 40 |
| 16 Dec | 35.1 °C | 15 % | 28 km/h | 0.0 mm | Very high 42 |
| 17 Dec | 35.6 °C | 15 % | 37 km/h | 0.0 mm | Very high 48 |
| 18 Dec | 35.6 °C | 14 % | 37 km/h | 0.0 mm | Very high 49 |
| 19 Dec | 35.8 °C | 19 % | 40 km/h | 0.0 mm | Extreme 50 |
| 20 Dec | 36.3 °C | 17 % | 39 km/h | 0.0 mm | Extreme 52 |
| 21 Dec after | 36.7 °C | 18 % | 37 km/h | 0.0 mm | Extreme 51 |
| 22 Dec after | 36.9 °C | 19 % | 39 km/h | 0.0 mm | Extreme 50 |
| 23 Dec after | 36.5 °C | 23 % | 44 km/h | 0.0 mm | Extreme 51 |
| 24 Dec after | 36.5 °C | 22 % | 35 km/h | 0.0 mm | Very high 46 |
| 25 Dec after | 37.5 °C | 19 % | 41 km/h | 0.0 mm | Extreme 51 |
| 26 Dec after | 36.0 °C | 17 % | 37 km/h | 0.0 mm | Extreme 51 |
| 27 Dec after | 35.7 °C | 19 % | 37 km/h | 0.0 mm | Very high 50 |
| 28 Dec after | 35.6 °C | 18 % | 39 km/h | 0.0 mm | Extreme 52 |
| 29 Dec after | 36.8 °C | 15 % | 32 km/h | 0.0 mm | Very high 48 |
| 30 Dec after | 37.1 °C | 15 % | 34 km/h | 0.0 mm | Very high 48 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 457Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Nagero fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 5 December 2016 to 20 December 2016 (16 days). The perimeter dates it from 12 December 2016 to 20 December 2016.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 13,958 hectares (139.6 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Nagero (14,056 ha, 1.5 %).
- What was the weather like?
- During the fire the temperature reached 36.7 °C, humidity dropped to 13 % and gusts hit 40 km/h. The fire danger index (FWI) reached 52, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of South Sudan (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Start date: 12 December 2016 → 5 December 2016.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 12 December 2016 to 20 December 2016. 457 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.