Skip to content
worldfires
RU · Russia · –

Nadymsky Rayon fire, 13 August 2026 Nadymsky Rayon

Out · last detection 30 Aug 2026, 08:41 UTC

The fire started on 13 August 2026 in Nadymsky Rayon, Russia, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 17,143 hectares from heat detections, spread across a single municipality.

Number 73 in Russia in 2026, of 420.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…

Suggestions: Nadymsky Rayon · 2026

Burnt area
17,143ha
GWIS perimeter (Copernicus)
Duration
18days
13 Aug 2026 – 30 Aug 2026
Municipalities hit
1
districts
Started on
13 Aug
2026
Heat detections
2,505
in a single hotspot: 241 MW
Danger at start
4
Very low · FWI index
Average daily power
1.4GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Aug30 Aug
30 Aug 2026

How it evolved, day by day

13 Aug 2026 · 5 MW · 3 14 Aug 2026 · 723 MW · 77 15 Aug 2026 · 442 MW · 97 16 Aug 2026 · 902 MW · 116 17 Aug 2026 · 665 MW · 127 18 Aug 2026 · 1,564 MW · 261 19 Aug 2026 · 1,027 MW · 220 20 Aug 2026 · 2,212 MW · 210 21 Aug 2026 · 4,002 MW · 312 22 Aug 2026 · 3,084 MW · 207 23 Aug 2026 · 904 MW · 215 24 Aug 2026 · 1,301 MW · 271 25 Aug 2026 · 5,176 MW · 364 26 Aug 2026 · 192 MW · 21 28 Aug 2026 · 4 MW · 2 30 Aug 2026 · 9 MW · 2
13 Aug 17 Aug 21 Aug 25 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (62 passes) and with what wind. Watch the film

The weather it burned in

26°high
51km/h · peak gust
33%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 2.2 mm on 31 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 11% of the area of London (171 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Nadymsky Rayon where it started
    16,168 ha reached on 13 Aug
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.11 ha
Residents< 20

Inside the perimeter there were about 0.11 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Aug 22.6 °C 40 % 42 km/h 0.1 mm Very low 4
14 Aug 23.5 °C 43 % 34 km/h 0.0 mm Low 10
15 Aug 25.1 °C 43 % 38 km/h 0.0 mm Moderate 17
16 Aug 24.3 °C 36 % 44 km/h 0.0 mm High 24
17 Aug 23.1 °C 39 % 50 km/h 0.0 mm High 29
18 Aug 22.9 °C 39 % 42 km/h 0.0 mm High 26
19 Aug 24.9 °C 37 % 39 km/h 0.0 mm Moderate 20
20 Aug 24.9 °C 38 % 21 km/h 0.0 mm Moderate 16
21 Aug 25.9 °C 33 % 21 km/h 0.0 mm Moderate 18
22 Aug 23.8 °C 35 % 28 km/h 0.0 mm Moderate 21
23 Aug 24.2 °C 35 % 24 km/h 0.0 mm Moderate 21
24 Aug 24.0 °C 38 % 22 km/h 0.0 mm Moderate 19
25 Aug 25.1 °C 34 % 45 km/h 0.0 mm High 36
26 Aug 22.2 °C 54 % 47 km/h 9.9 mm Low 7
27 Aug 18.0 °C 73 % 51 km/h 4.9 mm Very low 0
28 Aug 11.7 °C 50 % 29 km/h 1.9 mm Very low 1
29 Aug 11.4 °C 49 % 20 km/h 0.8 mm Very low 2
30 Aug 11.6 °C 61 % 16 km/h 3.8 mm Very low 2
31 Aug after 11.3 °C 63 % 41 km/h 2.2 mm Very low 1

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Aug 2026
After · 6 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 21 August 2026 the air beside the fire reached 2,384 µg/m³ of PM2.5. That day averaged 965: 64 times the WHO daily guideline (15).

PM2.5 peak2,384 µg/m³
Days over the guideline15 days
PM102,406 µg/m³
Optical depth4.81
11 Aug15 Aug19 Aug23 Aug27 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 2,505Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Nadymsky Rayon fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 13 August 2026 to 30 August 2026 (18 days). The perimeter dates it from 14 August 2026 to 26 August 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 17,143 hectares (171.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Nadymsky Rayon (16,168 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 25.9 °C, humidity dropped to 33 % and gusts hit 51 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 August 2026 to 26 August 2026. 2,505 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.