Skip to content
worldfires
MX · Mexico · –

Nácori Chico fire, June 2022 Nácori Chico

Out · last detection 17 Jun 2022, 19:52 UTC

The fire started on 12 June 2022 in Nácori Chico, Mexico, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,709 hectares from heat detections, spread across a single municipality.

It is the 68th largest in Sonora since 2016 (of 82 with a page). Number 191 in Mexico in 2022, of 232.

Burnt area
1,709ha
GWIS perimeter (Copernicus)
Duration
6days
12 Jun 2022 – 17 Jun 2022
Municipalities hit
1
municipalities
Started on
12 Jun
2022
Heat detections
133
in a single hotspot: 45 MW
Danger at start
44
Very high · FWI index
Average daily power
117MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Jun17 Jun
17 Jun 2022

How it evolved, day by day

12 Jun 2022 · 23 MW · 4 13 Jun 2022 · 145 MW · 27 14 Jun 2022 · 140 MW · 26 15 Jun 2022 · 297 MW · 37 16 Jun 2022 · 48 MW · 28 17 Jun 2022 · 50 MW · 11
12 Jun 15 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
45km/h · peak gust
16%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 9.2 mm on 18 Jun.

This area had burned before

41% of the perimeter overlaps earlier fires recorded since 2016: 706 ha in 2016.

How big is it?

10 km
It burned the equivalent of 1.1% of the area of London (17 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Nácori Chico where it started
    1,719 ha reached on 12 Jun
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.42 ha
Residents< 20

Inside the perimeter there were about 0.42 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

Official record

According to CONAFOR, this fire started on 11 June 2022 and burned 1,352 ha (the satellite measured 1,709 ha). The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.

CONAFOR (Comisión Nacional Forestal), estadística de incendios forestales en datos.gob.mx (CC BY 4.0). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Jun 34.8 °C 18 % 39 km/h 0.2 mm Very high 44
13 Jun 32.6 °C 16 % 41 km/h 0.0 mm Very high 43
14 Jun 32.0 °C 20 % 36 km/h 0.1 mm Very high 45
15 Jun 34.7 °C 17 % 30 km/h 0.0 mm Very high 44
16 Jun 34.5 °C 21 % 45 km/h 1.4 mm Very high 46
17 Jun 31.0 °C 29 % 38 km/h 1.7 mm High 30
18 Jun after 27.6 °C 43 % 27 km/h 9.2 mm Low 10

Its twins: fires that started in the same weather

It started with an FWI of 43.6, a minimum humidity of 18% and 1 day without rain. Fires in the area that started in weather like this since 2016: 19.

FWI at the start 43.6
Minimum humidity 18 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Nácori Chico fire, June 2019
3,926 ha 12 days FWI 46.1 Min. humidity 17 % 31 km away, in 2019

First rain (1 mm or more) after it ended: 4.4 mm on 1 Jul.

What happened to them

12 days
median duration
4,414 ha
median area
21 %
went past 10,000 ha
3.0 mm
rain at the end (median; 15 of 19 had it)

It stayed below its twins: 1,709 ha against a median of 4,414 ha. It lasted 6 days, against 12 days.

In 4 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

9.2 mmfirst rain
18 Junthe day after it ended
45km/h · max. gust

It was considered over on 17 Jun, and on 18 Jun 9.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 19, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Jun 2022
After · 24 Jun 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 133Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico

Frequently asked questions

How long did the Nácori Chico fire last?
GWIS (Copernicus) dates it between 12 June 2022 and 17 June 2022: 6 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,709 hectares (17.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Nácori Chico (1,719 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 34.8 °C, humidity dropped to 16 % and gusts hit 45 km/h. The fire danger index (FWI) reached 46, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 12 days and their median area 4,414 ha; 21 % went past 10,000 ha. In 4 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 133 Suomi-NPP VIIRS detections on those dates.
  • Compared with CONAFOR: 1,352 official ha against 1,709 ha of perimeter; similar, but with reservations.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.