Skip to content
worldfires
MM · Myanmar · –

Myawaddy fire, 17 March 2026 Myawaddy

Out · last detection 5 Apr 2026, 05:59 UTC

The fire started on 17 March 2026 in Myawaddy, Myanmar, and satellites saw it burning for 20 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,747 hectares from heat detections, spread across a single municipality.

Number 295 in Myanmar in 2026, of 480.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

The power measured by the satellite is low (23.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
2,747ha
GWIS perimeter (Copernicus)
Duration
20days
17 Mar 2026 – 5 Apr 2026
Municipalities hit
1
municipalities
Started on
17 Mar
2026
Heat detections
46
in a single hotspot: 23 MW
Danger at start
6
Low · FWI index
Average daily power
19MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Mar5 Apr
5 Apr 2026

How it evolved, day by day

18 Mar 2026 · 22 MW · 2 19 Mar 2026 · 46 MW · 5 20 Mar 2026 · 4 MW · 1 23 Mar 2026 · 11 MW · 4 24 Mar 2026 · 10 MW · 6 25 Mar 2026 · 9 MW · 2 27 Mar 2026 · 20 MW · 5 28 Mar 2026 · 5 MW · 2 30 Mar 2026 · 3 MW · 1 31 Mar 2026 · 1 MW · 1 1 Apr 2026 · 9 MW · 1 2 Apr 2026 · 11 MW · 3 3 Apr 2026 · 15 MW · 2 4 Apr 2026 · 26 MW · 4 5 Apr 2026 · 93 MW · 7
18 Mar 23 Mar 27 Mar 31 Mar 5 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
41km/h · peak gust
37%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 1,955 ha in 2016, 1,296 ha in 2017, 998 ha in 2018, 2,277 ha in 2019, 1,941 ha in 2020, 2,206 ha in 2021, 1,255 ha in 2022, 516 ha in 2023, 1,391 ha in 2024, 1,295 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 2,746 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.7% of the area of London (27 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Myawaddy where it started
    2,757 ha reached on 18 Mar
    0.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents≈ 30

Inside the perimeter there were about 0.08 hectares of built-up land and about 30 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Mar 31.0 °C 54 % 25 km/h 0.6 mm Low 6
18 Mar 33.2 °C 42 % 28 km/h 0.0 mm Moderate 17
19 Mar 32.4 °C 48 % 27 km/h 0.0 mm Moderate 19
20 Mar 32.6 °C 45 % 34 km/h 0.0 mm High 23
21 Mar 33.6 °C 44 % 20 km/h 0.2 mm Moderate 21
22 Mar 32.7 °C 52 % 28 km/h 0.1 mm High 24
23 Mar 33.3 °C 47 % 38 km/h 0.0 mm High 27
24 Mar 34.6 °C 37 % 38 km/h 0.0 mm High 30
25 Mar 34.8 °C 40 % 35 km/h 0.0 mm High 29
26 Mar 35.7 °C 41 % 31 km/h 0.0 mm High 28
27 Mar 35.0 °C 42 % 32 km/h 0.0 mm High 31
28 Mar 34.9 °C 42 % 28 km/h 0.3 mm High 30
29 Mar 33.4 °C 48 % 28 km/h 0.5 mm High 29
30 Mar 34.2 °C 46 % 32 km/h 0.1 mm High 29
31 Mar 34.6 °C 44 % 37 km/h 0.0 mm High 31
1 Apr 35.5 °C 39 % 29 km/h 0.0 mm High 28
2 Apr 35.9 °C 37 % 41 km/h 0.0 mm High 33
3 Apr 34.9 °C 42 % 40 km/h 0.0 mm High 35
4 Apr 33.6 °C 45 % 36 km/h 0.0 mm High 31
5 Apr 33.8 °C 49 % 36 km/h 0.0 mm High 31
6 Apr after 34.4 °C 48 % 35 km/h 0.0 mm High 30
7 Apr after 34.3 °C 46 % 38 km/h 0.0 mm High 33
8 Apr after 34.9 °C 43 % 40 km/h 0.0 mm High 33
9 Apr after 34.0 °C 46 % 37 km/h 0.0 mm High 31
10 Apr after 34.9 °C 39 % 38 km/h 0.0 mm High 34
11 Apr after 33.9 °C 48 % 41 km/h 0.0 mm High 37
12 Apr after 34.9 °C 45 % 31 km/h 0.0 mm High 32
13 Apr after 33.5 °C 55 % 35 km/h 0.0 mm High 31
14 Apr after 35.7 °C 38 % 36 km/h 0.0 mm High 32
15 Apr after 35.0 °C 34 % 40 km/h 0.0 mm Very high 41

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Mar 2026
After · 12 Apr 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 March 2026 the air beside the fire reached 96 µg/m³ of PM2.5. That day averaged 56: 3.7 times the WHO daily guideline (15).

PM2.5 peak96 µg/m³
Days over the guideline15 days
PM10102 µg/m³
Optical depth0.92
21 Mar24 Mar27 Mar30 Mar2 Apr
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 46Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Myanmar

Frequently asked questions

How long did the Myawaddy fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 17 March 2026 to 5 April 2026 (20 days). The perimeter dates it from 23 March 2026 to 1 April 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,747 hectares (27.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Myawaddy (2,757 ha, 0.9 %).
What was the weather like?
During the fire the temperature reached 35.9 °C, humidity dropped to 37 % and gusts hit 41 km/h. The fire danger index (FWI) reached 35, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Myanmar (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 1 April 2026 → 5 April 2026.
  2. Start date: 23 March 2026 → 17 March 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 23 March 2026 to 1 April 2026. 46 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.