Muñoz fire, 18 March 2020 Muñoz, Rómulo Gallegos
The fire started on 18 March 2020 in Muñoz, Venezuela, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,215 hectares from heat detections, spread across 2 municipalities.
It is the 19th largest in Apure since 2016 (of 919 with a page). Number 12 in Venezuela in 2020, of 400.
Compare with…
- Burnt area
- 9,215ha
- GWIS perimeter (Copernicus)
- Duration
- 11days
- 18 Mar 2020 – 28 Mar 2020
- Municipalities hit
- 2
- municipalities
- Started on
- 18 Mar
- 2020
- Heat detections
- 317
- in a single hotspot: 373 MW
- Danger at start
- 50
- Extreme · FWI index
- Average daily power
- 808MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 5.4 mm on 31 Mar.
This area had burned before
24% of the perimeter overlaps earlier fires recorded since 2016: 1,592 ha in 2016, 1,379 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 2,249 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
5,256 ha reached on 18 Mar0.7 %
-
Rómulo Gallegos 24,418 inhabitants4,017 ha reached on 21 Mar0.3 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Inside the perimeter there were about 0.18 hectares of built-up land and about 20 residents (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 18 Mar | 37.1 °C | 26 % | 46 km/h | 0.0 mm | Extreme 50 |
| 19 Mar | 37.3 °C | 26 % | 47 km/h | 0.0 mm | Extreme 50 |
| 20 Mar | 37.3 °C | 23 % | 48 km/h | 0.0 mm | Extreme 52 |
| 21 Mar | 38.2 °C | 21 % | 46 km/h | 0.0 mm | Extreme 52 |
| 22 Mar | 37.3 °C | 25 % | 52 km/h | 0.0 mm | Extreme 52 |
| 23 Mar | 36.7 °C | 31 % | 46 km/h | 0.0 mm | Very high 47 |
| 24 Mar | 38.1 °C | 30 % | 43 km/h | 0.0 mm | Very high 46 |
| 25 Mar | 38.3 °C | 28 % | 43 km/h | 0.0 mm | Very high 47 |
| 26 Mar | 38.6 °C | 27 % | 41 km/h | 0.0 mm | Very high 46 |
| 27 Mar | 39.1 °C | 23 % | 45 km/h | 0.0 mm | Very high 50 |
| 28 Mar | 38.2 °C | 20 % | 44 km/h | 0.0 mm | Extreme 51 |
| 29 Mar after | 37.2 °C | 29 % | 47 km/h | 0.0 mm | Extreme 51 |
| 30 Mar after | 38.1 °C | 31 % | 46 km/h | 0.0 mm | Very high 47 |
| 31 Mar after | 32.8 °C | 35 % | 21 km/h | 5.4 mm | Low 8 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 317Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 6,523 haRómulo Gallegos17 February 2026 · 20 days · 9 km away
- 10,398 haRómulo Gallegos14 March 2026 · 15 days · 23 km away
- 9,747 haRómulo Gallegos3 March 2024 · 27 days · 23 km away
- 8,455 haRómulo Gallegos21 February 2026 · 23 days · 26 km away
- 8,470 haMuñoz25 February 2026 · 27 days · 27 km away
- 7,652 haRómulo Gallegos10 February 2022 · 16 days · 34 km away
Frequently asked questions
- How long did the Muñoz fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 18 March 2020 to 28 March 2020 (11 days). The perimeter dates it from 20 March 2020 to 28 March 2020.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,215 hectares (92.2 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Muñoz (5,256 ha, 0.7 %); Rómulo Gallegos (4,017 ha, 0.3 %).
- What was the weather like?
- During the fire the temperature reached 39.1 °C, humidity dropped to 20 % and gusts hit 52 km/h. The fire danger index (FWI) reached 52, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Venezuela (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 911 · Emergency number and official warnings ›
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Start date: 20 March 2020 → 18 March 2020.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 20 March 2020 to 28 March 2020. 317 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.