Skip to content
worldfires
MZ · Mozambique · –

Mulevala fire, 3 September 2026 Mocuba, Ile, Mulevala

Out · last detection 28 Sept 2026, 11:00 UTC

The fire started on 3 September 2026 in Mulevala, Mozambique, and satellites saw it burning for 26 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,172 hectares from heat detections, spread across 3 municipalities.

Number 142 in Mozambique in 2026, of 571.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…
Burnt area
7,172ha
GWIS perimeter (Copernicus)
Duration
26days
3 Sept 2026 – 28 Sept 2026
Municipalities hit
3
districts
Started on
3 Sept
2026
Heat detections
166
in a single hotspot: 40 MW
Danger at start
42
Very high · FWI index
Average daily power
55MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Sept28 Sept
28 Sept 2026

How it evolved, day by day

3 Sept 2026 · 4 MW · 2 4 Sept 2026 · 54 MW · 6 5 Sept 2026 · 77 MW · 9 6 Sept 2026 · 11 MW · 3 7 Sept 2026 · 14 MW · 2 11 Sept 2026 · 42 MW · 7 12 Sept 2026 · 66 MW · 8 13 Sept 2026 · 116 MW · 21 14 Sept 2026 · 92 MW · 13 15 Sept 2026 · 278 MW · 46 16 Sept 2026 · 115 MW · 14 17 Sept 2026 · 40 MW · 6 18 Sept 2026 · 75 MW · 9 20 Sept 2026 · 23 MW · 2 21 Sept 2026 · 30 MW · 4 24 Sept 2026 · 3 MW · 2 25 Sept 2026 · 6 MW · 3 26 Sept 2026 · 12 MW · 2 27 Sept 2026 · 25 MW · 4 28 Sept 2026 · 24 MW · 3
3 Sept 7 Sept 15 Sept 18 Sept 25 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
54km/h · peak gust
21%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 7.5 mm on 29 Sept.

This area had burned before

60% of the perimeter overlaps earlier fires recorded since 2016: 1,150 ha in 2016, 824 ha in 2017, 2,490 ha in 2018, 655 ha in 2021, 1,226 ha in 2024, 1,230 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 4,273 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.5% of the area of London (72 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 4,155 ha
    0.5 %
  2. Ile
    3,034 ha
    1.0 %
  3. Mulevala where it started
    17 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Sept 32.7 °C 25 % 32 km/h 0.0 mm Very high 42
4 Sept 33.6 °C 26 % 36 km/h 0.0 mm Very high 43
5 Sept 32.1 °C 32 % 32 km/h 0.0 mm Very high 43
6 Sept 31.0 °C 34 % 33 km/h 0.0 mm Very high 41
7 Sept 29.2 °C 37 % 40 km/h 0.1 mm Very high 44
8 Sept 24.2 °C 51 % 42 km/h 2.5 mm Moderate 14
9 Sept 25.2 °C 59 % 30 km/h 2.5 mm Low 7
10 Sept 28.8 °C 50 % 24 km/h 0.9 mm Low 6
11 Sept 30.5 °C 44 % 31 km/h 0.3 mm High 22
12 Sept 32.3 °C 31 % 34 km/h 0.0 mm High 30
13 Sept 31.5 °C 31 % 29 km/h 0.0 mm High 32
14 Sept 31.6 °C 30 % 31 km/h 0.0 mm High 30
15 Sept 34.2 °C 24 % 37 km/h 0.0 mm Extreme 51
16 Sept 32.5 °C 27 % 54 km/h 0.0 mm Extreme 63
17 Sept 34.0 °C 24 % 38 km/h 0.0 mm Very high 48
18 Sept 33.5 °C 21 % 36 km/h 0.0 mm Extreme 50
19 Sept 30.8 °C 30 % 37 km/h 0.0 mm Very high 38
20 Sept 30.3 °C 32 % 32 km/h 0.0 mm High 34
21 Sept 31.3 °C 39 % 34 km/h 0.0 mm High 29
22 Sept 29.0 °C 46 % 36 km/h 0.1 mm High 26
23 Sept 29.6 °C 38 % 32 km/h 0.0 mm High 32
24 Sept 31.0 °C 35 % 35 km/h 0.0 mm High 30
25 Sept 30.4 °C 34 % 35 km/h 0.0 mm High 30
26 Sept 32.3 °C 33 % 25 km/h 0.0 mm High 29
27 Sept 35.7 °C 24 % 28 km/h 0.0 mm High 37
28 Sept 36.4 °C 27 % 29 km/h 0.0 mm Very high 40
29 Sept after 32.9 °C 42 % 33 km/h 7.5 mm High 33

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 Aug 2026
After · 5 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 3 September 2026 the air beside the fire reached 66 µg/m³ of PM2.5. That day averaged 37: 2.5 times the WHO daily guideline (15).

PM2.5 peak66 µg/m³
Days over the guideline24 days
PM1068 µg/m³
Optical depth1.05
1 Sept8 Sept15 Sept22 Sept29 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 166Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mozambique

Frequently asked questions

How long did the Mulevala fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 3 September 2026 to 28 September 2026 (26 days). The perimeter dates it from 10 September 2026 to 21 September 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,172 hectares (71.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Mocuba (4,155 ha, 0.5 %); Ile (3,034 ha, 1.0 %); Mulevala (17 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 36.4 °C, humidity dropped to 21 % and gusts hit 54 km/h. The fire danger index (FWI) reached 63, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 10 September 2026 to 21 September 2026. 166 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.