Skip to content
worldfires
MZ · Mozambique · →

Mueda fire, 12 August 2026 Mueda

Out · last detection 18 Aug 2026, 10:28 UTC

The fire started on 12 August 2026 in Mueda, Mozambique, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,005 hectares from heat detections, spread across a single municipality.

It is the 56th largest in Cabo Delgado since 2016 (of 120 with a page). Number 313 in Mozambique in 2026, of 532.

Compare with…

Suggestions: Mueda · 2016

Burnt area
4,005ha
GWIS perimeter (Copernicus)
Duration
7days
12 Aug 2026 – 18 Aug 2026
Municipalities hit
1
districts
Started on
12 Aug
2026
Heat detections
99
in a single hotspot: 130 MW
Danger at start
27
High · FWI index
Average daily power
157MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Aug18 Aug
18 Aug 2026

How it evolved, day by day

12 Aug 2026 · 391 MW · 27 13 Aug 2026 · 119 MW · 16 15 Aug 2026 · 316 MW · 20 16 Aug 2026 · 41 MW · 8 17 Aug 2026 · 72 MW · 9 18 Aug 2026 · 3 MW · 1
12 Aug 13 Aug 15 Aug 16 Aug 17 Aug 18 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
52km/h · peak gust
33%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.5% of the area of London (40 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Mueda where it started
    4,033 ha reached on 11 Aug
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Aug 29.3 °C 37 % 18 km/h 0.0 mm High 27
12 Aug 30.6 °C 35 % 37 km/h 0.0 mm High 32
13 Aug 29.7 °C 33 % 42 km/h 0.0 mm High 35
14 Aug 27.1 °C 47 % 52 km/h 0.3 mm High 38
15 Aug 27.3 °C 40 % 38 km/h 0.0 mm High 30
16 Aug 26.6 °C 41 % 37 km/h 0.1 mm High 30
17 Aug 27.8 °C 37 % 34 km/h 0.0 mm High 29
18 Aug 28.3 °C 35 % 33 km/h 0.0 mm High 29
19 Aug after 26.5 °C 43 % 37 km/h 0.0 mm High 30
20 Aug after 28.9 °C 41 % 32 km/h 0.0 mm High 29
21 Aug after 29.6 °C 47 % 36 km/h 1.7 mm Moderate 16
22 Aug after 31.5 °C 34 % 32 km/h 0.0 mm High 28
23 Aug after 31.4 °C 37 % 28 km/h 0.0 mm High 29
24 Aug after 29.8 °C 34 % 35 km/h 0.0 mm High 31
25 Aug after 30.7 °C 36 % 34 km/h 0.0 mm High 32
26 Aug after 29.6 °C 41 % 33 km/h 0.0 mm High 32
27 Aug after 29.7 °C 38 % 42 km/h 0.0 mm High 35
28 Aug after 29.3 °C 38 % 39 km/h 0.0 mm High 33
29 Aug after 28.0 °C 44 % 45 km/h 0.1 mm High 35
30 Aug after 28.5 °C 45 % 33 km/h 0.3 mm High 31
31 Aug after 28.5 °C 40 % 34 km/h 0.0 mm High 32
1 Sept after 29.6 °C 39 % 39 km/h 0.0 mm High 31
2 Sept after 29.5 °C 37 % 40 km/h 0.0 mm High 34
3 Sept after 29.8 °C 35 % 27 km/h 0.0 mm High 30
4 Sept after 31.7 °C 34 % 33 km/h 0.0 mm High 34

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Aug 2026
After · 25 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 17 August 2026 the air beside the fire reached 38 µg/m³ of PM2.5. That day averaged 20: 1.4 times the WHO daily guideline (15).

PM2.5 peak38 µg/m³
Days over the guideline2 days
PM1040 µg/m³
Optical depth0.57
910111213141516171819202122232425262728
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 99Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mozambique ›

Frequently asked questions

How long did the Mueda fire last?
GWIS (Copernicus) dates it between 12 August 2026 and 18 August 2026: 7 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,005 hectares (40.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Mueda (4,033 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 31.5 °C, humidity dropped to 33 % and gusts hit 52 km/h. The fire danger index (FWI) reached 38, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 99 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.